Mgt Auth via TACACS+/Wireless User Auth via RADIUS

kenneth.hall — Sun, 04 Jul 2021 00:20:28 GMT

I'm trying to determine if it's possible to authenticate a management user to the WLC via TACACS+ and still use RADIUS to authenticate the wireless users (802.1x)? Auth server is ACS. I don't know ACS - it looks like I can set it up on the WLC side, however from the ACS side - the WLC's IP is already configured as a RADIUS client for the 802.1x auth of the wireless users...can the same WLC IP also be configured as a TACACS+ client?!?

Basically, I guess this is more of an ACS question...

thanks

-k

Re: Mgt Auth via TACACS+/Wireless User Auth via RADIUS

mattjenkins — Fri, 20 Mar 2009 14:46:50 GMT

Hi Kenneth,

Yes you can... We do it here... You just create another network device with the same IP address and as a TACACS+ client

Matt

topic Re: Mgt Auth via TACACS+/Wireless User Auth via RADIUS in Wireless

Mgt Auth via TACACS+/Wireless User Auth via RADIUS

Re: Mgt Auth via TACACS+/Wireless User Auth via RADIUS