topic Re: WLC 9800 ALERT >> Critical PKI-2-NON_AUTHORITATIVE_CLOCK: PK in Wireless

WLC 9800 ALERT >> Critical PKI-2-NON_AUTHORITATIVE_CLOCK: PKI

SAMM LEE — Wed, 24 May 2023 21:55:46 GMT

I get this alert, how can I correct it?

*May 15 15:57:21.482: %PKI-2-NON_AUTHORITATIVE_CLOCK: PKI functions can not be initialized until an authoritative time source, like NTP, can be obtained.

Re: WLC 9800 ALERT >> Critical PKI-2-NON_AUTHORITATIVE_CLOCK: PK

Mark Elsen — Thu, 25 May 2023 05:36:14 GMT

- Do you have NTP setup and configured on the controller ?

Re: WLC 9800 ALERT >> Critical PKI-2-NON_AUTHORITATIVE_CLOCK: PK

SAMM LEE — Thu, 25 May 2023 13:55:37 GMT

HI Marce, Yes If it is configured and synchronized.

Re: WLC 9800 ALERT >> Critical PKI-2-NON_AUTHORITATIVE_CLOCK: PK

Rich R — Thu, 25 May 2023 15:48:09 GMT

Was the log message *before* NTP synchronised? (like after reload)

Re: WLC 9800 ALERT >> Critical PKI-2-NON_AUTHORITATIVE_CLOCK: PK

Mark Elsen — Thu, 25 May 2023 16:15:20 GMT

- Have a checkup review of the WLC 9800 configuration with the CLI command show tech wireless ; have the output analyzed with :
https://cway.cisco.com/wireless-config-analyzer/