topic Re: Wireless query on 2.4Ghz and 5Ghz Band in Wireless

Wireless query on 2.4Ghz and 5Ghz Band

Noovi — Mon, 10 Jul 2023 11:12:20 GMT

Hello Guys,

I have 5 APs in one room and WLC assigned rando dynamic channel for them for both 2.4Ghz and 5Ghz.

My question is if i select any one random AP, then i am not able to see all neighbor AP radio channels. (From WLC-Home-AP-RF Troubleshoot).

For. e.g. If i selects AP3 then

- in 2.4Ghz tab i can see almost 3 APs channel

- in 5Ghz tab, i can only see 1 AP channel and not remaining ones. I have attached snapshot.

Is this optimal behaviour or something is wrong?

Flavio Miranda — Mon, 10 Jul 2023 11:25:15 GMT

Take a look via command line and see if the result is different

show ap name <apname> auto-rf dot11 <band>

Rich R — Wed, 12 Jul 2023 15:39:22 GMT

You don't mention the controller model or software version but make sure it is up to date as per the TAC recommended links below.