topic Re: does the wlc5508 have this in Wireless

Reboot multiple or all access points via WLC web GUI or Cisco Prime

josephbtyler — Mon, 05 Jul 2021 07:20:23 GMT

Is it possible to reboot multiple or all wireless access points via the WLC web GUI or Cisco Prime at one time? If so, can it be scheduled? I would prefer to not have to reset each and every access point individually. Thanks!

Re: Reboot multiple or all access points via WLC web GUI or Cisc

Scott Fella — Wed, 05 Mar 2014 04:30:15 GMT

You can use the CLI to reset the access points if you want. Just need to build a script. NCS/PI you should be able to push out a template to reset the AP's also.

config ap reset

Sent from Cisco Technical Support iPhone App

Re: Reboot multiple or all access points via WLC web GUI or Cisc

Sandeep Choudhary — Wed, 05 Mar 2014 07:03:42 GMT

Just adding my 1 Euro

You can create Access Point Templates in PI.

By AP Templates permit you to make changes in bulk to access points.

1. From the PI, to to Configure-> Lightweight AP Templates -->

2. Then from the dropdown, select "Add template" and click "GO".

3. Name it "Reset APs" (description is optional)

4. Click "SAVE"

At the bottom of the "AP Parameters" tab/page, check the "Reboot AP" check box.

Click on the "Select APs" tab.

Select the APs that you wish to reset.

Place a check in (or uncheck) each checkbox for each AP you wish to reset. The operation of the AP template (in this case, simply resetting the AP(s)) will be performed on each AP where the check box is checked.

Click APPLY to execute the template and reset your list of APs.

And as Scott told , you can build a script.

Regards

Dont forget to rate helpful posts

hello,

bouchal-38 — Tue, 08 Mar 2016 14:11:38 GMT

hello,

The problem with this command: config ap reset

it is asking for confirmation. y/n

is there a command to force reboot with NO confirmation?

As per my knowledge, there is

Sandeep Choudhary — Tue, 08 Mar 2016 14:41:13 GMT

As per my knowledge, there is no command which don't ask about confirmation.

Regards

Don forget to rate helpful posts

does the wlc5508 have this

Ethan Castor — Wed, 30 Mar 2016 18:15:19 GMT

does the wlc5508 have this feature? I'm not seeing it, got the need to reboot all of the wap's talking to our controller, want an easy way to do it.

That described feature is for

patoberli — Thu, 31 Mar 2016 13:25:59 GMT

That described feature is for the Prime Infrastructure (or maybe also WCS).

I think the simplest way is to reboot the controller, that should cause all APs to reboot if they can't find any controller to connect to. It could be that the controller is faster up again, than the timeout of the AP which it waits, until it decides to reboot 😞

What I wonder, why do you want to reboot them?

Another way is to enable SSH on all APs and then login to them and issue the reload command (haven't tested that though).

I have created this template

cableguy103 — Thu, 05 Jan 2017 17:28:20 GMT

I have created this template and applied it to all of my AP's and nothing happened. I also tried just applying it to one of my test AP's and it does not reboot it. I tested the CLI and was able to reboot the AP but as mentioned before you get confirmation y/n on each AP int he CLI.

What do I need to look for in the applying the template or what not.

Thanks

Re: That described feature is for

secsecsec — Thu, 14 Sep 2017 08:45:21 GMT

Hello,

what about then if you have cluster?

Re: hello,

Davide Fiumi — Wed, 08 Nov 2017 15:53:47 GMT

@bouchal-38 I don't see the issue, just make a script for

config ap reset [apname]

with spaces. I just did it to check the solution. Looks very much like the problem could be exactly this.

Re: I have created this template

wmeech — Mon, 11 Dec 2017 05:57:49 GMT

I can't help you with the template.

But a script is real easy. SSH to the controller and get a list of APs (Command SHOW AP SUMMARY or SHOW AP SEARCH ABC*). Paste the list into MSWord. Use the REPLACE (^H) command to replace paragraph mark (^p) with (^py^pCONFIG AP RESET ). Fix the top and bottom of the script, cut and paste it into notepad (Removes any unprintable characters). Copy this and paste into the controller SSH session.

Re: Reboot multiple or all access points via WLC web GUI or Cisc

christoffer.larsson — Fri, 18 May 2018 07:07:32 GMT

Thank you so much.
perfect solution.

Re: Reboot multiple or all access points via WLC web GUI or Cisco Prime

jtrohm — Mon, 22 Jul 2019 01:08:27 GMT

I've had this question many times and the fact that the WLC interface doesn't have an option for this seems really short sighted. I reset APs all the time for troubleshooting and testing purposes.

No one has posted a script yet, so here is something REALLY ugly that I cooked up just now for my own purposes. Please mark as helpful if you end up using it. Everything I post here is free to use, just don't sell it or call call me when it doesn't work as expected.

#!/bin/bash

#
# This is a simple if ugly script to reset all APs on a controller
#
# It requires a linux shell with sshpass installed
#
# It takes the username and password as command line options
#
# Running this WILL expose your password to other users on the box.
# Obviously the usual "This isn't secure but..." warnings apply.
#
# !!! Use at your own risk !!!
#

SSHUSER=${1}
SSHPASS=${2}
WLC_IP=10.10.10.10
TEMPFILE="/tmp/$(cat /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w 32 | head -n 1).txt"

echo "config paging disable" > ${TEMPFILE}
echo "show ap search *" >> ${TEMPFILE}
echo "logout" >> ${TEMPFILE}
echo "N" >> ${TEMPFILE}
echo "" >> ${TEMPFILE}

APLIST=$(sshpass -p "${SSHPASS}" ssh ${SSHUSER}@${WLC_IP} < ${TEMPFILE} | grep AIR- | awk '{print $3}')

for APNAME in ${APLIST}
do
echo "config paging disable" > ${TEMPFILE}
echo "config ap reset ${APNAME}" >> ${TEMPFILE}
echo "y" >> ${TEMPFILE}
echo "logout" >> ${TEMPFILE}
echo "N" >> ${TEMPFILE}
echo "" >> ${TEMPFILE}

sshpass -p "${SSHPASS}" ssh ${SSHUSER}@${WLC_IP} < ${TEMPFILE} > /dev/null 2>&1

echo "Reset AP ${APNAME} on WLC ${WLC_IP} at $(date +"%Y%m%d.%H%M")"
done

rm -f ${TEMPFILE}

Re: hello,

Alex Pfeil — Fri, 18 Jun 2021 16:06:31 GMT

This worked great for me, thank you!

Re: Reboot multiple or all access points via WLC web GUI or Cisco Prim

JEFFREY SESSLER — Mon, 03 Jan 2022 20:50:23 GMT

Wouldn't "AP Image Reset" do the trick as well? This is part of the AP image pre-download process, but as long as one doesn't issue the AP Image swap command, it should cause all the AP's to reboot on their existing code.

Re: does the wlc5508 have this

AndreiGheorghe73622 — Wed, 26 Jul 2023 21:01:42 GMT

It worked for me.Thank you.

Re: Reboot multiple or all access points via WLC web GUI or Cisco Prim

m4xi — Mon, 28 Oct 2024 12:24:47 GMT

Hello,
you can restart directly in the GUI at the WLC.

Configuration -> Wireless -> Access Points

Select the AP you want to restart, move in the tabs to Advanced and click on the cycle button "Performs reset on the AP"

Regards,

Re: Reboot multiple or all access points via WLC web GUI or Cisco Prim

jtrohm — Mon, 28 Oct 2024 12:32:22 GMT

Thank you for your response. Unfortunately, this does not accomplish the core question, which is how to perform this operation on a group of access-points without individually rebooting them using the process you described.