<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic Re: AP 2702 cannot join WLC in Wireless</title>
    <link>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4895332#M258788</link>
    <description>&lt;P&gt;Collect the complete console logs from those 2 APs from power-on and attach here as .txt files.&lt;BR /&gt;However if you can't ping the AP that suggests a basic layer 2/layer 3 issue so you might have 2 faulty APs.&lt;BR /&gt;If they're faulty the logs should make that clear - they either won't boot or they will report problems after booting.&lt;BR /&gt;You'd also be wise to read through the field notices below and make sure you're using an up to date code version as per TAC recommended link below.&lt;/P&gt;</description>
    <pubDate>Sat, 29 Jul 2023 11:09:19 GMT</pubDate>
    <dc:creator>Rich R</dc:creator>
    <dc:date>2023-07-29T11:09:19Z</dc:date>
    <item>
      <title>AP 2702 cannot join WLC</title>
      <link>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4886032#M258214</link>
      <description>&lt;P&gt;Hello everyone,&lt;/P&gt;&lt;P&gt;I have a problem with AIR-CAP2702I-E-K9 series of Cisco’s Access Points. 2 out of 15 APs won't associate with the WLC 8540 even though they have exactly the same configuration. I'm using only one IP address to test the APs. The two APs that cannot associate do not show any specific log error, the only thing I noticed is that I cannot ping these two APs even when I connect them directly to the PC, but I can ping the others. I formatted the flash of all APs and installed the identical version of IOS. The Accept Manufactured Installed Certificate (MIC) option is enabled on the WLC and the MAC addresses of all APs has already added to the WLC.&lt;/P&gt;&lt;P&gt;I have already read similar problems with Cisco APs.&lt;/P&gt;</description>
      <pubDate>Mon, 17 Jul 2023 13:30:58 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4886032#M258214</guid>
      <dc:creator>Draganst</dc:creator>
      <dc:date>2023-07-17T13:30:58Z</dc:date>
    </item>
    <item>
      <title>Re: AP 2702 cannot join WLC</title>
      <link>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4886158#M258229</link>
      <description>&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp;&amp;nbsp;&lt;FONT color="#FF6600"&gt;&lt;U&gt;&lt;EM&gt; &amp;gt;...&lt;/EM&gt;&lt;/U&gt;&lt;/FONT&gt;&lt;SPAN&gt;&lt;FONT color="#FF6600"&gt;&lt;U&gt;&lt;EM&gt;that I cannot ping these two APs&amp;nbsp;&lt;/EM&gt;&lt;/U&gt;&lt;/FONT&gt;&lt;BR /&gt;&amp;nbsp;- If you can not ping the APs and you must make sure that they can go through the basic boot process and find an ip address (usually you will be using DHCP for that).&amp;nbsp; -&amp;gt; Check the boot process of the involved access points ,&amp;nbsp;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN&gt;&amp;nbsp;M.&lt;/SPAN&gt;&lt;/P&gt;</description>
      <pubDate>Mon, 17 Jul 2023 16:48:18 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4886158#M258229</guid>
      <dc:creator>Mark Elsen</dc:creator>
      <dc:date>2023-07-17T16:48:18Z</dc:date>
    </item>
    <item>
      <title>Re: AP 2702 cannot join WLC</title>
      <link>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4887434#M258305</link>
      <description>&lt;BLOCKQUOTE&gt;&lt;HR /&gt;&lt;a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/1544381"&gt;@Draganst&lt;/a&gt;&amp;nbsp;wrote:&lt;BR /&gt;&lt;SPAN&gt;The Accept Manufactured Installed Certificate (MIC) option is enabled on the WLC and the MAC addresses of all APs has already added to the WLC.&lt;/SPAN&gt;&lt;HR /&gt;&lt;/BLOCKQUOTE&gt;
&lt;P&gt;What about the date of the WLC?&amp;nbsp; Did anyone roll back the year to 2022?&lt;/P&gt;</description>
      <pubDate>Wed, 19 Jul 2023 04:35:08 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4887434#M258305</guid>
      <dc:creator>Leo Laohoo</dc:creator>
      <dc:date>2023-07-19T04:35:08Z</dc:date>
    </item>
    <item>
      <title>Re: AP 2702 cannot join WLC</title>
      <link>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4895332#M258788</link>
      <description>&lt;P&gt;Collect the complete console logs from those 2 APs from power-on and attach here as .txt files.&lt;BR /&gt;However if you can't ping the AP that suggests a basic layer 2/layer 3 issue so you might have 2 faulty APs.&lt;BR /&gt;If they're faulty the logs should make that clear - they either won't boot or they will report problems after booting.&lt;BR /&gt;You'd also be wise to read through the field notices below and make sure you're using an up to date code version as per TAC recommended link below.&lt;/P&gt;</description>
      <pubDate>Sat, 29 Jul 2023 11:09:19 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4895332#M258788</guid>
      <dc:creator>Rich R</dc:creator>
      <dc:date>2023-07-29T11:09:19Z</dc:date>
    </item>
    <item>
      <title>Re: AP 2702 cannot join WLC</title>
      <link>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4896053#M258855</link>
      <description>&lt;P&gt;&lt;SPAN&gt;&lt;a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/326026"&gt;@Leo Laohoo&lt;/a&gt;&amp;nbsp; The date was January 2023. and I set the time correctly but without success.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;I've attached 2 files with logs from APs, and when I compare those 2 files, the logs are almost identical. However, when I compare them with logs from the AP that joined the WLC, I've got an additional log :&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;*Jan 7, 14:52:49.115: AP has SHA2 MIC certificate - Using SHA2 MIC certificate for DTLS&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;&amp;nbsp;After that, another DTLS communication take place.&lt;/SPAN&gt;&lt;/P&gt;</description>
      <pubDate>Mon, 31 Jul 2023 12:14:39 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4896053#M258855</guid>
      <dc:creator>Draganst</dc:creator>
      <dc:date>2023-07-31T12:14:39Z</dc:date>
    </item>
    <item>
      <title>Re: AP 2702 cannot join WLC</title>
      <link>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4896117#M258860</link>
      <description>&lt;P&gt;GigabitEthernet0 comes up and then it seems to do nothing.&amp;nbsp; &lt;BR /&gt;Are you using static IP config on the AP or DHCP?&lt;BR /&gt;What WLC discovery method are you using?&lt;BR /&gt;CAPWAP DTLS state machine will only start after the AP establishes IP connectivity and discovers a controller to join.&lt;/P&gt;</description>
      <pubDate>Mon, 31 Jul 2023 14:03:08 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4896117#M258860</guid>
      <dc:creator>Rich R</dc:creator>
      <dc:date>2023-07-31T14:03:08Z</dc:date>
    </item>
    <item>
      <title>Re: AP 2702 cannot join WLC</title>
      <link>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4896128#M258865</link>
      <description>&lt;P&gt;I configured a static IP of the AP and also of the WLC. The configuration exaple is below:&lt;/P&gt;&lt;P&gt;capwap ap ip address x.x.x.x mask x.x.x.x&lt;BR /&gt;capwap ap ip default-gateway x.x.x.x&lt;BR /&gt;capwap ap controller ip address x.x.x.x&lt;/P&gt;</description>
      <pubDate>Mon, 31 Jul 2023 14:15:18 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4896128#M258865</guid>
      <dc:creator>Draganst</dc:creator>
      <dc:date>2023-07-31T14:15:18Z</dc:date>
    </item>
    <item>
      <title>Re: AP 2702 cannot join WLC</title>
      <link>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4896424#M258900</link>
      <description>&lt;BLOCKQUOTE&gt;&lt;HR /&gt;&lt;a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/1544381"&gt;@Draganst&lt;/a&gt;&amp;nbsp;wrote:&lt;BR /&gt;&lt;SPAN&gt;The date was January 2023. and I set the time correctly but without success.&lt;/SPAN&gt;&lt;HR /&gt;&lt;/BLOCKQUOTE&gt;
&lt;P&gt;Read what I said.&amp;nbsp; I did not say (or imply) setting the time and date correctly.&amp;nbsp; I said "&lt;SPAN&gt;&lt;EM&gt;roll back the year to &lt;STRONG&gt;20&lt;FONT color="#FF0000"&gt;22&lt;/FONT&gt;&lt;/STRONG&gt;&lt;/EM&gt;".&lt;/SPAN&gt;&lt;/P&gt;</description>
      <pubDate>Mon, 31 Jul 2023 23:29:14 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4896424#M258900</guid>
      <dc:creator>Leo Laohoo</dc:creator>
      <dc:date>2023-07-31T23:29:14Z</dc:date>
    </item>
    <item>
      <title>Re: AP 2702 cannot join WLC</title>
      <link>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4896577#M258909</link>
      <description>&lt;P&gt;Sorry. Yes, 6 months ago we rolled back the date of the WLC to 2022 because of expired certificates on the APs. More about that:&lt;/P&gt;&lt;P&gt;&lt;A href="https://www.cisco.com/c/en/us/support/docs/wireless/aironet-700-series-access-points/218447-ios-ap-image-download-fails-due-to-expir.html" target="_blank"&gt;https://www.cisco.com/c/en/us/support/docs/wireless/aironet-700-series-access-points/218447-ios-ap-image-download-fails-due-to-expir.html&lt;/A&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;We no longer do that. Now I flash the AP with the proper image, so the AP doesn't have to download an image from the WLC.&lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Tue, 01 Aug 2023 07:49:00 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4896577#M258909</guid>
      <dc:creator>Draganst</dc:creator>
      <dc:date>2023-08-01T07:49:00Z</dc:date>
    </item>
    <item>
      <title>Re: AP 2702 cannot join WLC</title>
      <link>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4896682#M258911</link>
      <description>&lt;BLOCKQUOTE&gt;&lt;HR /&gt;&lt;a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/1544381"&gt;@Draganst&lt;/a&gt;&amp;nbsp;wrote:&lt;BR /&gt;
&lt;P class="1690888095603"&gt;&amp;nbsp;&lt;/P&gt;
&lt;SPAN&gt;Sorry. Yes, 6 months ago we rolled back the date of the WLC to 2022 because of expired certificates on the APs.&lt;/SPAN&gt;&lt;HR /&gt;&lt;/BLOCKQUOTE&gt;
&lt;P&gt;I am not here discussing about what happened 6 months ago.&amp;nbsp; I am talking about now.&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Let me ask again (for brevity sake):&amp;nbsp;&lt;STRONG&gt;&amp;nbsp;Did anyone make any attempts to roll back the date to 2022 or not?&amp;nbsp;&amp;nbsp;&lt;/STRONG&gt;&lt;/P&gt;</description>
      <pubDate>Tue, 01 Aug 2023 11:10:01 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4896682#M258911</guid>
      <dc:creator>Leo Laohoo</dc:creator>
      <dc:date>2023-08-01T11:10:01Z</dc:date>
    </item>
    <item>
      <title>Re: AP 2702 cannot join WLC</title>
      <link>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4896716#M258912</link>
      <description>&lt;P&gt;As far as I know, nobody made any attempts to roll back the date to 2022.&lt;/P&gt;</description>
      <pubDate>Tue, 01 Aug 2023 11:24:57 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/ap-2702-cannot-join-wlc/m-p/4896716#M258912</guid>
      <dc:creator>Draganst</dc:creator>
      <dc:date>2023-08-01T11:24:57Z</dc:date>
    </item>
  </channel>
</rss>

