topic Re: Problem with credentials when implementing PEAP using Win2K3 in Wireless https://community.cisco.com/t5/wireless/problem-with-credentials-when-implementing-peap-using-win2k3-ias/m-p/430236#M25938 <HTML><HEAD></HEAD><BODY><P>Try using a connection request policy to strip the portion of the username that you don't want.</P></BODY></HTML> Thu, 20 Oct 2005 14:47:18 GMT lburleso 2005-10-20T14:47:18Z Problem with credentials when implementing PEAP using Win2K3 IAS https://community.cisco.com/t5/wireless/problem-with-credentials-when-implementing-peap-using-win2k3-ias/m-p/430235#M25937 <P>I've set similar networks up where the wirless clients authenticated against an IAS server on a Win2K3 domain. The problem I'm having is that there is not a domain controller on the network, so the IAS server has to use local accounts. The MS event viewer is showing the following:</P><P></P><P>User MyPC\MyUser was denied access.</P><P>...</P><P>Reason = The current server configuration supports only local user accounts.</P><P></P><P>I think the problem is that the computer name MyPC is prepended to the username, and the server name is MyServer. Hence, MyServer\MyUser will probably work, but I don't know if this is possible. </P><P></P><P>Thanks</P> Sun, 04 Jul 2021 18:14:12 GMT https://community.cisco.com/t5/wireless/problem-with-credentials-when-implementing-peap-using-win2k3-ias/m-p/430235#M25937 baskervi 2021-07-04T18:14:12Z Re: Problem with credentials when implementing PEAP using Win2K3 https://community.cisco.com/t5/wireless/problem-with-credentials-when-implementing-peap-using-win2k3-ias/m-p/430236#M25938 <HTML><HEAD></HEAD><BODY><P>Try using a connection request policy to strip the portion of the username that you don't want.</P></BODY></HTML> Thu, 20 Oct 2005 14:47:18 GMT https://community.cisco.com/t5/wireless/problem-with-credentials-when-implementing-peap-using-win2k3-ias/m-p/430236#M25938 lburleso 2005-10-20T14:47:18Z