topic Re: XP only (no ACU) and PEAP in Wireless https://community.cisco.com/t5/wireless/xp-only-no-acu-and-peap/m-p/302676#M26073 <HTML><HEAD></HEAD><BODY><P>Check out the following URL,</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a008014626b.html" target="_blank">http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a008014626b.html</A></P></BODY></HTML> Fri, 04 Jun 2004 12:45:24 GMT fmeetz 2004-06-04T12:45:24Z XP only (no ACU) and PEAP https://community.cisco.com/t5/wireless/xp-only-no-acu-and-peap/m-p/302675#M26072 <P>With the ACU installed, I was able to get PEAP working on my 350 card and my 1100 AP. Without the ACU, I just can't get it to work. I the Dynamic VLAN assignment works ok, but I can't get an IP address or pass traffic with a static IP. Has anyone gotten this to work?</P> Sun, 04 Jul 2021 16:40:50 GMT https://community.cisco.com/t5/wireless/xp-only-no-acu-and-peap/m-p/302675#M26072 miguknom 2021-07-04T16:40:50Z Re: XP only (no ACU) and PEAP https://community.cisco.com/t5/wireless/xp-only-no-acu-and-peap/m-p/302676#M26073 <HTML><HEAD></HEAD><BODY><P>Check out the following URL,</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a008014626b.html" target="_blank">http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a008014626b.html</A></P></BODY></HTML> Fri, 04 Jun 2004 12:45:24 GMT https://community.cisco.com/t5/wireless/xp-only-no-acu-and-peap/m-p/302676#M26073 fmeetz 2004-06-04T12:45:24Z