topic Re: AP 3700 in Wireless

AP 3700

nharish — Sun, 25 Dec 2022 01:40:26 GMT

can i convert AP 3700 in to mobility express by changing IOs

Re: AP 3700

Leo Laohoo — Sun, 25 Dec 2022 03:26:31 GMT

Nope.

AP2700/3700 can only operate in CAPWAP or autonomous.

Re: AP 3700

balaji.bandi — Sun, 25 Dec 2022 10:20:47 GMT

What is the Cisco ^® Mobility Express solution?

A. Cisco Mobility Express is a virtual wireless LAN controller integrated on 802.11ac Wave 2 access points (Cisco Aironet ^® 4800, 3800, 2800, 1850, 1830, 1815, 1560, and 1540 Series).

Simple by design, Mobility Express is a reliable and affordable branch solution for small and medium-sized businesses and distributed enterprises serving up to 100 access points and 2000 clients. It brings the best practices and quality of Cisco’s large- and medium-scale solutions to smaller-scale implementations without additional cost or complexity.

https://www.cisco.com/c/en/us/solutions/collateral/enterprise-networks/mobility-express/q-and-a-c67-734485.html

Re: AP 3700

Rich R — Fri, 27 Oct 2023 12:30:05 GMT

The 3700 can be an autonomous AP (standalone) or a CAPWAP (lightweight) AP connected to a Mobility Express WLC.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-4/b_cisco_mobility_express_8_4/b_Mobility_Express_Deployment_guide_chapter_0100.html

Re: AP 3700

nharish — Fri, 27 Oct 2023 00:34:05 GMT

We have 4 floors of office , recently added a WLC to add extra APs . we Rukus ap too .

we have sucessfully configured Cisco APs and it all connected to gateway too and WLc (open Security )and APs got ips

but our issue is when ever a client connects to rukus APs they will get landing page and get connected to internet

but when they connect to cisco AP's they are not getting landing page and they have ip and the status of the connection would be no internet

Gateway ==> WLC 2504 ==> Cisco APs

Re: AP 3700

nharish — Fri, 27 Oct 2023 02:33:49 GMT

Can you please help me with this thank you

Re: AP 3700

Rich R — Fri, 27 Oct 2023 12:27:58 GMT

@nharish you've not given enough information.
We don't know anything about how your WLC, WLAN and APs are configured or how you're expecting them to work.
For a start make sure your WLC code is up to date - latest available for 2504 is currently 8.5.182.11 (link below)
Then check your WLC config using the config analyzer (link below).
And refer to the config guides to configure the network according to your design requirements.