topic Re: Flex profile in Wireless

Flex profile

iores — Tue, 31 Oct 2023 20:42:41 GMT

Hi,

I have several WLANs per Policy tag, and each is mapped to different VLAN under Policy profile.

Is the Flex profile neccessary if VLAN mapping is configured under Policy profile for each WLAN or the default flex profile can be used instead?

Re: Flex profile

Mark Elsen — Wed, 01 Nov 2023 07:15:36 GMT

- What controller model are you using ?

Re: Flex profile

iores — Wed, 01 Nov 2023 10:56:28 GMT

Controller is C9800.

Re: Flex profile

Mark Elsen — Wed, 01 Nov 2023 14:00:09 GMT

- Albeit not being a direct reply , your issue and or any wrong configuration settings will be pointed out and commented on by the WirelessAnalyzer procedure : use the CLI command show tech wireless and feed the output into
Wireless Config Analyzer

You can iterate with WirelessAnalyzer meaning making changes on the 9800 configuration and use WirelessAnalyzer again until you have a satisfactory result (it will also give advices on many other topics too)

Re: Flex profile

JPavonM — Thu, 02 Nov 2023 09:17:25 GMT

Industry Best Practices invite you not to use default profiles or configurations.

Cisco C9800 BP indicates that as well (https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9800-series-wireless-controllers/guide-c07-743627.html).