topic Re: How to use multiple country domains on WLC 9800-L in Wireless

How to use multiple country domains on WLC 9800-L

snetuscom — Fri, 03 Nov 2023 15:34:28 GMT

Hello,

C9120AXI-B APs are joined to WLC 9800-L with US country code.

I tried to join several APs AP3802I-E-K9 with UK country code to WLC 9800-L. But failed.

Reason is Regulatory domain check failed.

When

Re: How to use multiple country domains on WLC 9800-L

Mark Elsen — Fri, 03 Nov 2023 15:55:11 GMT

- FYI : https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/country-codes.html

Re: How to use multiple country domains on WLC 9800-L

Leo Laohoo — Fri, 03 Nov 2023 23:56:18 GMT

Are the 3800 installed IN the UK?

Re: How to use multiple country domains on WLC 9800-L

snetuscom — Sat, 04 Nov 2023 00:30:44 GMT

AP 3802i-B-K9 was installed in same location in US.

Model was -B so I added one more country code in WLC. (WLC has GB, US together now.)

After adding GB, 3802i-B was joined but wifi interfaces(2.4GHz and 5GHz) were down.

If WLC has only US country code, 3802i-B was not joined.

Re: How to use multiple country domains on WLC 9800-L

Mark Elsen — Sat, 04 Nov 2023 06:29:05 GMT

>...If WLC has only US country code, 3802i-B was not joined.
- Add the corresponding country code to the controller,

Re: How to use multiple country domains on WLC 9800-L

Rich R — Tue, 07 Nov 2023 11:49:46 GMT

Are you using separate AP profiles for the US and GB APs and setting the country in the AP profile?
wireless country GB
wireless country US
ap profile gb-aps
country GB
ap profile us-aps
country US
And then make sure the correct APs are assigned to the correct AP profile.