WLSE IN PEAP env

chuahs — Sun, 04 Jul 2021 15:28:07 GMT

will there be a problem for WLSE in a PEAP env, I saw on the web that is support LEAP and Radius, no mention of PEAP

Re: WLSE IN PEAP env

derwin — Fri, 24 Jan 2003 21:59:23 GMT

I have not tried it myself but given that in the documentation for the WLSE it says it can set the feild Authentication Type and one of the options there is network eap and the authentication server and if you look in the AP documentation you will see that to set PEAP that is the field that needs to be enabled

Step 9 Select EAP Authentication under the server. The EAP Authentication checkbox designates the server as an authenticator for any EAP type, including LEAP, PEAP, EAP-TLS, EAP-SIM, and EAP-MD5.

Then it looks like you should be fine.

Sources

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cwparent/cw_1105/wlse/1_3/user_gd/config.htm#xtocid9

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350scg/ap350ch8.htm#1036420

topic Re: WLSE IN PEAP env in Wireless

WLSE IN PEAP env

Re: WLSE IN PEAP env