topic Re: 9800 CLI edit 6 ghz radio for one specific wireless AP in Wireless

9800 CLI edit 6 ghz radio for one specific wireless AP

QNxPzLdsuF — Wed, 15 Nov 2023 15:29:38 GMT

From the 9800 CLI interface, how do I edit the 6ghz radio on one specific 9166 AP to make the following changes:
Change role assignment = Client serving
Change band selection = 5ghz

Re: 9800 CLI edit 6 ghz radio for one specific wireless AP

Mark Elsen — Wed, 15 Nov 2023 16:15:53 GMT

- Review this documentation : https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/802-11-parameters-and-band-selection.html

Re: 9800 CLI edit 6 ghz radio for one specific wireless AP

QNxPzLdsuF — Wed, 15 Nov 2023 16:20:37 GMT

Thank you Marce1000! The band select documentation has only "global" configuration options.

I am trying to reproduce in the CLI what the GUI allows: ability to configure each-individual-AP

Re: 9800 CLI edit 6 ghz radio for one specific wireless AP

Mark Elsen — Wed, 15 Nov 2023 16:40:54 GMT

- A trick to follow up on what the GUI does is to make a backup of the running config to an external repository , then make the intended change with the GUI , take backup again to different external filename and make a diff,

Re: 9800 CLI edit 6 ghz radio for one specific wireless AP

Leo Laohoo — Wed, 15 Nov 2023 22:03:49 GMT

@QNxPzLdsuF wrote:

From the 9800 CLI interface, how do I edit the 6ghz radio on one specific 9166 AP to make the following changes:
Change role assignment = Client serving
Change band selection = 5ghz

The 6 Ghz radio will only operate in 6 Ghz band.