topic Re: CW9164 AP Configuration in Wireless

CW9164 AP Configuration

pavansharma — Tue, 30 Jan 2024 13:34:08 GMT

Anyone can tell me what is the default username & password of cisco cw9164 access point is CLI

Kindly let us know also how to configure it.

Re: CW9164 AP Configuration

RoadRunner4k — Tue, 30 Jan 2024 13:43:10 GMT

should default be Cisco/Cisco

Re: CW9164 AP Configuration

RoadRunner4k — Tue, 30 Jan 2024 13:44:22 GMT

Im assuming its running in EWC mode-

Cisco Embedded Wireless Controller on Catalyst Access Points Configuration Guide, IOS XE Dublin 17.12.x - Overview of Cisco Embedded Wireless Controller on Catalyst Access Points [Cisco Embedded Wireless Controller on Catalyst Access Points] - Cisco

Re: CW9164 AP Configuration

pavansharma — Tue, 30 Jan 2024 13:50:25 GMT

I tried it many times but not succeed.

Re: CW9164 AP Configuration

pavansharma — Tue, 30 Jan 2024 13:53:07 GMT

I want to configure it like c9115 AP.

Re: CW9164 AP Configuration

jagan.chowdam — Tue, 30 Jan 2024 20:15:04 GMT

Cisco 9164 doesn't support EWC I believe.

The following Catalyst APs are only supported as EWC.
Cisco Catalyst APs: 9130 (I/E), 9124 (I/D/E), 9120 (I/E/P), 9117, 9115 (I/E), 9105 (I/W)

Ref: https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#c9800-embed-ctr-ap_support

Have you tried username and password admin/admin.

First make sure it is a Cisco Catalyst AP (DNA Persona) and not Meraki persona. To confirm the AP is not in Meraki mode, HTTPS to the IP address of it.

If you get a splash page then use the serial number as username and no password to login to Meraki AP.

Jagan Chowdam

/**Please rate helpful responses**/

Re: CW9164 AP Configuration

Haydn Andrews — Tue, 30 Jan 2024 22:25:07 GMT

Admin/Cisco

Re: CW9164 AP Configuration

pavansharma — Wed, 31 Jan 2024 06:03:30 GMT

I have tried admin/admin also but not succeed

Re: CW9164 AP Configuration

kutumela — Wed, 31 Jan 2024 06:44:22 GMT

Did you do factory reset on the device first and restarted afterwards ?

Re: CW9164 AP Configuration

pavansharma — Wed, 31 Jan 2024 06:47:57 GMT

Yes did the same but nothing happened and still not able to login.

Re: CW9164 AP Configuration

pavansharma — Wed, 31 Jan 2024 09:07:45 GMT

Now, Problem is resolved. Reset time is >30 Sec then I am able to login with Cisco/Cisco.