topic Re: Cisco 9800-40 RRM Reset Command in Wireless

Cisco 9800-40 RRM Reset Command

Jay233 — Thu, 16 Feb 2023 16:15:16 GMT

Hi All,

Just in the middle of deploying 400+ 9120axi AP's into a large building, migration will be over several weeks.

From past experience on older controllers I always reset RRM globally when all new AP's are operational.

Restart the RRM DCA process on the RF Group Leader. From the WLC, enter the below commands:

2.4 GHz: #config 802.11b channel global restart

5 GHz: #config 802.11a Chanel global restart

What is the command for the 9800's or best process ?

Cheers,

balaji.bandi — Thu, 16 Feb 2023 20:12:57 GMT

check the Cat 9800 command syntax :

Rich R — Fri, 17 Feb 2023 14:11:18 GMT

Ben Crissman — Wed, 31 Jan 2024 02:04:42 GMT

ap dot11 {24ghz | 5ghz | 6ghz} rrm dca restart