topic Re: Does AireOS 8.5 Upgrade for 5520 and 8540 Controllers require CIMC Upgrade in Wireless

Does AireOS 8.5 Upgrade for 5520 and 8540 Controllers require CIMC Upgrade

Scott Gillies — Mon, 05 Jul 2021 17:57:19 GMT

I have to upgrade a 5520 WLC from 8.2.x to 8.5.x. The CIMC module is not used or connected so no remote CIMC access.

As usual the release notes are not very clear but quotes bug reference CSCvo33873 that states for 5520 and 8540 appliances "We recommend that you upgrade the CIMC utility to Version 3.0(4d) that has been certified to be used with these controllers." (release 4.0(2h) is now available).

The CSCvo33873 bug notes states that

“After a wireless LAN controller reloads, no access points are able to join.” This is exceptionally worrying!!
“Ssh and HTTPS connections to the controller fail.” Is this just to the CIMC or the WLC?

So I am unclear if this is just an issue for those who manage the WLC (and upgrade) via CIMC or if it is a broader issues for those who would use the conventional WLC GUI route.

As part of my 5520 8.2x – 8.5x upgrade, is it necessary to first upgrade the CIMC software if it is not being used?

Re: Does AireOS 8.5 Upgrade for 5520 and 8540 Controllers require CIMC Upgrade

Rasika Nayanajith — Thu, 05 Sep 2019 18:49:36 GMT

As part of my 5520 8.2x – 8.5x upgrade, is it necessary to first upgrade the CIMC software if it is not being used?

It is not mandatory to upgrade CIMC first. However due to those vulnerabilities, it is recommend to upgrade your CIMC to latest.

HTH

Rasika

*** Pls rate all useful responses ***

Re: Does AireOS 8.5 Upgrade for 5520 and 8540 Controllers require CIMC Upgrade

Arne Bier — Fri, 06 Sep 2019 05:43:25 GMT

Hi @Scott Gillies

Your timing is perfect. I just unboxed two brand new 5520's and they came shipped from factory with CIMC 4(01)a and WLC code 8.3.140.0

My plan was to put both controllers on the gold star release (8.5.151.0) - the release notes were already confusing because they recommended an older version of CIMC. I suspect the documentation has not been updated. Ignore that old CIMC.

I upgraded both controllers to 8.5.151.0 while it was on the "old" CIMC code.

I then proceeded to upgrade both servers using the HUU (Host Update Utility) to version 4.(02)h

Everything went smoothly.

Re: Does AireOS 8.5 Upgrade for 5520 and 8540 Controllers require CIMC Upgrade

Scott Gillies — Fri, 06 Sep 2019 07:47:41 GMT

Thank you. I am remote from the appliances so it would be a headache to impliment if the CIMC had to be included with the upgrade. I can now plan a seperate change for the CIMC as recommended.

Re: Does AireOS 8.5 Upgrade for 5520 and 8540 Controllers require CIMC Upgrade

Scott Gillies — Fri, 06 Sep 2019 07:48:15 GMT

Thanks Arne. Will do this when I get the oppertunity.

Re: Does AireOS 8.5 Upgrade for 5520 and 8540 Controllers require CIMC Upgrade

Leo Laohoo — Fri, 06 Sep 2019 09:01:59 GMT

The CIMC upgrade will take between 60 to 70 minutes. During this time, the physical hardware will not be responsive. The "breakdown" of the CIMC upgrade are the following:

HUU gets copied into the CIMC = 24 minutes
<Click "Update All">
CIMC firmware = 13 minutes
LOM & SSD = 5 minutes
BIOS = 4 minutes
BIOS finishes and when "Click Yes" to continue, takes another 1 minute before PING DROPS #1
PING DROPS #1 (CIMC stops responding to ping) for about 4 minutes
CIMC responds to ping for another 3 minutes
PING DROPS #2 for another 4 minutes
After this CIMC starts to respond to ping and begins to "power up" the WLC.

Re: Does AireOS 8.5 Upgrade for 5520 and 8540 Controllers require CIMC Upgrade

Rasika Nayanajith — Fri, 06 Sep 2019 12:57:27 GMT

I upgraded one of my 8540 CIMC and took more than 1hr (Agree with what Leo has stated). Here is the steps if anyone wonders

https://mrncciew.com/2019/09/06/cimc-upgrade-8540-5520-wlc/

HTH

Rasika