https://community.cisco.com/t5/wireless/cw9166i-without-controller/m-p/5013876#M266364 <P>No, not possible.</P> Wed, 07 Feb 2024 06:11:32 GMT Leo Laohoo 2024-02-07T06:11:32Z https://community.cisco.com/t5/wireless/cw9166i-without-controller/m-p/5013868#M266362 <P>Hi,</P><P>Is it possible to use CW9166I without WLC?</P><P>Thanks.</P> Wed, 07 Feb 2024 05:36:58 GMT https://community.cisco.com/t5/wireless/cw9166i-without-controller/m-p/5013868#M266362 createshare87610 2024-02-07T05:36:58Z https://community.cisco.com/t5/wireless/cw9166i-without-controller/m-p/5013876#M266364 <P>No, not possible.</P> Wed, 07 Feb 2024 06:11:32 GMT https://community.cisco.com/t5/wireless/cw9166i-without-controller/m-p/5013876#M266364 Leo Laohoo 2024-02-07T06:11:32Z https://community.cisco.com/t5/wireless/cw9166i-without-controller/m-p/5013883#M266365 <P><SPAN>The Cisco Catalyst 9162I, 9164I, 9166I and 9166D1 access points (APs) are the first in Cisco’s history to have a common hardware that has the capability to join either an on-premises Cisco Catalyst and Catalyst-based wireless LAN controller or a cloud-based Cisco Meraki wireless network.</SPAN></P><P><SPAN><A href="https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9164-series-access-points/catalyst-9166i-9164i-dg.html" target="_blank">Cisco Catalyst CW9166D1 Access Point Deployment Guide - Cisco</A></SPAN></P> Wed, 07 Feb 2024 06:26:10 GMT https://community.cisco.com/t5/wireless/cw9166i-without-controller/m-p/5013883#M266365 DYARIBARHAM 2024-02-07T06:26:10Z