topic Re: Setting maximum concurrent login on 9800 WLC GUI in Wireless

Setting maximum concurrent login on 9800 WLC GUI

askingforuser — Mon, 12 Feb 2024 10:36:50 GMT

Hi, does anyone know where can I find the place that we can set the number of maximum concurrent login on 9800 WLC GUI? I was referring to the CISCO best practice and it teaches us how to set through CLI but I want to set at the GUI instead, does anyone know which tab or area should I go to in the GUI? thank you!

Re: Setting maximum concurrent login on 9800 WLC GUI

Mark Elsen — Mon, 12 Feb 2024 10:45:38 GMT

- To be honest , if you can set that parameter through CLI , then that is preferred ; sometimes a particular parameter lacks implementation in the GUI ; let alone that this question when needing the GUI for it may lead to a race condition...
You may also want to share how you do it in the CLI , this could help us find it in the GUI too ,

Re: Setting maximum concurrent login on 9800 WLC GUI

Sandeep Choudhary — Mon, 12 Feb 2024 10:55:08 GMT

At the moment, I dont think its possible to configure this using GUI on 9800 series WLCs.

Regards

Dont forget to rate helpful posts

Re: Setting maximum concurrent login on 9800 WLC GUI

askingforuser — Mon, 12 Feb 2024 11:50:44 GMT

in the security guideline it said:

User login policy

Configure user login policies by entering this command:

C9800(config)# wireless client max-user-login ?

<0-8> Maximum number of login sessions for a single user, 0-8 (0=Unlimited)

Verify the user login policies by entering this command:

C9800# show run | I max-user-login

Re: Setting maximum concurrent login on 9800 WLC GUI

Mark Elsen — Mon, 12 Feb 2024 12:05:38 GMT

- Ref : https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9800-series-wireless-controllers/guide-c07-743627.html#Userloginpolicy

The max-user-login parameter does not refer to WLC GUI administrative users , but wireless end user policies (restricting logins from different devices with the same credentials)

Re: Setting maximum concurrent login on 9800 WLC GUI

askingforuser — Tue, 13 Feb 2024 14:27:47 GMT

actually I may find something similar on GUI: Configuration > Wireless > Wireless Global > Maximum Login Session Per User

Re: Setting maximum concurrent login on 9800 WLC GUI

komiks — Wed, 11 Sep 2024 09:40:49 GMT

https://bst.cisco.com/bugsearch/bug/CSCvu62984?rfs=qvred

Re: Setting maximum concurrent login on 9800 WLC GUI

Gaurav Kansal — Thu, 12 Sep 2024 09:27:26 GMT

Dear User,

Please try this option which you find on below location:
Administration > Management > *HTTP/HTTPS/Netconf/VTY > Timeout policy configuration > maximum number of request (* Please set this according to your need)

GoodLuck
Regards
Gaurav Kansal

If you find this post helpful then please vote as Helpful and if it solves your issue then please mark as Solution.