topic Ok,if you have any document in Wireless

Mac Address Add on Cisco Controller.

MOHAMMAD RAZA — Mon, 05 Jul 2021 08:41:08 GMT

Hi,

On my controller have multiple SSID configured, mac filter is also enabled, now i want to add one MAC address for two SSID.

Pls any one help on this.

Regards,

Nafis Ashique

Sandeep Choudhary — Wed, 08 Oct 2014 10:48:01 GMT

Go to Security > AAA > Mac Filtering

Then clcik on New.

Here put the MAC address, select Any Profile, Interface-None and leave empty other option.

Regards

Dont forget to rate helpful posts

MOHAMMAD RAZA — Wed, 08 Oct 2014 11:08:15 GMT

Hi Sandeep,

Thanks for your Quick reply.

Suppose mac address is aa:aa:aa:aa and my ssid is a1, b1 and c1, now i want to do aa:aa:aa:aa can only connect a1 & b1 but not on c1.

As per your reply aa:aa:aa:aa can connect on every SSID.

Regards,

Nafis Ashique

Sandeep Choudhary — Wed, 08 Oct 2014 11:20:59 GMT

I think this cant be done on wlc alone, you must ahve a RADIUS server for this.

You must use: RADIUS-Based VLAN Access Control

Regards

MOHAMMAD RAZA — Wed, 08 Oct 2014 11:25:59 GMT

Ok,

if you have any document for the same pls put the url Link.

Regards,

Nafis Ashique

Sandeep Choudhary — Wed, 08 Oct 2014 12:17:58 GMT

check these:

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/71683-dynamicvlan-config.html#switch

https://supportforums.cisco.com/document/15431/how-implement-radius-based-vlan-access-control-features-access-point

Regards