topic Re: MAC Filtering Controller Templates in Wireless

MAC Filtering Controller Templates

THOMAS GLASER — Sun, 04 Jul 2021 06:30:45 GMT

hello

i have two ssids (profiles "Scanner" and "Tablet") and one notebook (ac:81:12:7a:4a:2d) which should be able to join both ssids by mac filtering.

i am using "MAC Filtering Controller Templates" from NCS 1.1.1.24

when i apply the second template (notebook 2) to the controllers the first template is removed 😞

Configure > Controller Template Launch Pad > Security > MAC Filtering:

Template Name MAC Address Profile Name Interface Description Applied To Controllers Applied To Virtual Domains

Notebook ac:81:12:7a:4a:2d Scanner management Notebook zum Testen 0 0

Notebook 2 ac:81:12:7a:4a:2d Tablet management Notebook zum Testen 2 3

how can i configure the templates that the notebook can join both ssid´s, Scanner and Tablet?

thanks tom

Re: MAC Filtering Controller Templates

Scott Fella — Tue, 12 Feb 2013 12:50:50 GMT

Can you post a screen shot of the template. If you per from this on the WLC, dies it work or not?

Sent from Cisco Technical Support iPhone App

Re: MAC Filtering Controller Templates

THOMAS GLASER — Wed, 13 Feb 2013 14:50:31 GMT

hello

i tried to create a second mac-entry by commandline:

(+++- -1) config>macfilter add ac:81:12:7a:4a:2d 3 0 test
MAC filter already exists - entry not created.

(+++- -1) config>macfilter add ac:81:12:7a:4a:2d 1 0 test
MAC filter already exists - entry not created.

wlc runs 7.0.116.0 software.

do higher softwareversions support multiple macfilter entries?

greetings om

Re: MAC Filtering Controller Templates

Stephen Rodriguez — Wed, 13 Feb 2013 15:00:54 GMT

No, all code only supports one entry of the MAC address into the database.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered