topic Re: Wireless Lan Controller 4404 exclusion setting in Wireless

Wireless Lan Controller 4404 exclusion setting

lbunnell — Sun, 04 Jul 2021 06:01:50 GMT

I have a Cisco 4404 wireless lan controller managing about 85 AP's.

The wireless side is setup for a private wlan and a public wlan. On the public side, users are directed to a captive-portal agreement page before they can get on the internet. My question is if there is a way for a single client, specified by either mac address or static IP , can be connected to this wlan without being prompted for the agreement page? I would like to setup a wireless printer for guests connected to this public side.

Re: Wireless Lan Controller 4404 exclusion setting

Amjad Abdullah — Tue, 13 Nov 2012 15:27:56 GMT

That is unfortunately not possible.
What you can do is to creat a new ssid (possibly hidden one) on same guest vlan and connect the printer to it.

Sent from Cisco Technical Support iPad App

Wireless Lan Controller 4404 exclusion setting

Saravanan Lakshmanan — Tue, 13 Nov 2012 20:20:49 GMT

you can use 'webauth on mac failure' option to achieve this. It enables L3 - web authentication on L2 - MAC filter failures.

#Configure printer mac address on mac filter for that guest wlan.

#On wlan - security>> L2>> Enable 'MAC filtering'.

#On wlan - security>> L3>> select 'On MAC Filter failure'.