https://community.cisco.com/t5/wireless/mesh-with-different-models-of-ap/m-p/5102384#M271375 <P>1. Make sure your 9800 software is up to date as per TAC recommended version (link below)</P> <P>2. Open a TAC case for advice.&nbsp; Note that 2702 is now <STRONG>End of support</STRONG> so expect some pushback on that.</P> Sat, 11 May 2024 13:21:39 GMT Rich R 2024-05-11T13:21:39Z https://community.cisco.com/t5/wireless/mesh-with-different-models-of-ap/m-p/5051116#M269255 <P>Hi,</P><P>Does any know or have it working where you have a mesh with a 9124 MAP connecting to a 2702 RAP?</P><P>Other 2702s will connect to the 2702 RAP, but not the 9124</P><P>They are connected to a 9800 series WLC.</P><P>Thanks in advance!</P><P>Shaun</P> Tue, 26 Mar 2024 23:41:02 GMT https://community.cisco.com/t5/wireless/mesh-with-different-models-of-ap/m-p/5051116#M269255 shaun williams 2024-03-26T23:41:02Z https://community.cisco.com/t5/wireless/mesh-with-different-models-of-ap/m-p/5102384#M271375 <P>1. Make sure your 9800 software is up to date as per TAC recommended version (link below)</P> <P>2. Open a TAC case for advice.&nbsp; Note that 2702 is now <STRONG>End of support</STRONG> so expect some pushback on that.</P> Sat, 11 May 2024 13:21:39 GMT https://community.cisco.com/t5/wireless/mesh-with-different-models-of-ap/m-p/5102384#M271375 Rich R 2024-05-11T13:21:39Z