topic lap 1121N can't join 5508 controller in Wireless

lap 1121N can't join 5508 controller

bayrem Nasri — Sun, 04 Jul 2021 05:39:46 GMT

hi, i'am trying to configure an AP1121g on my controller wlc5508 7.2 but i'am facing a compatibility issue. please confirm that this access point is supported by this wlc best regards bayrem

best regards

lap 1121N can't join 5508 controller

Stephen Rodriguez — Thu, 13 Sep 2012 15:16:48 GMT

the 1121 is not supported on 7.2 code.

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2.html#wp784122

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

lap 1121N can't join 5508 controller

bayrem Nasri — Thu, 13 Sep 2012 15:22:23 GMT

Hi,

I'am asking about 1121g, it is supported by 5508 controllers, if so , can you give me the last support software support?

thanks

Re: lap 1121N can't join 5508 controller

Stephen Rodriguez — Thu, 13 Sep 2012 15:27:37 GMT

It's not the WLC you have to worry about when checking AP compatability, it's the release of code.

The last version the 1121 is supported on is 7.0.235.0.

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_235_0.html#wp784122

Remember to check the release notes of the software you are wanting to upgrade to for AP/WLC compatabilty as well as what features have been introduced.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

lap 1121N can't join 5508 controller

bayrem Nasri — Thu, 13 Sep 2012 15:32:44 GMT

thunk u for your help

in the release note, only the 1121 is mentioned, i can't find the 1121g access point in the supported acess point list. i will downgrade the version of the wlc and see if this solve the broblem.

Re: lap 1121N can't join 5508 controller

bayrem Nasri — Fri, 14 Sep 2012 14:50:29 GMT

thx, the issue is solved with a downgrade from the 7.2 release to the 7.0 release