topic Re: Prime Infrastructure 1.3 AP Groups missing in Wireless

Prime Infrastructure 1.3 AP Groups missing

kerstin-534 — Sun, 04 Jul 2021 06:50:18 GMT

Where are the AP groups in PI 1.3 ?

The documentation in PI 1.3 states

Step 1 Choose Configure > Controller Template Launch Pad.

Step 2 Click AP Groups or choose WLAN > AP Groups from the left sidebar menu.

AP groups in the controller itself shows the applied template names, but there are no templates ???????

Re: Prime Infrastructure 1.3 AP Groups missing

Scott Fella — Thu, 04 Apr 2013 12:00:47 GMT

Have you looked using classic theme and not the default lifecycle theme. Click on the root on the top right and choose classic theme. Also you might need to discover templates from the controller as they don't sync the information.

Sent from Cisco Technical Support iPhone App

Re: Prime Infrastructure 1.3 AP Groups missing

Scott Fella — Thu, 04 Apr 2013 12:13:38 GMT

In lifecycle theme, all the templates found in the WLC should be populated. So it depends on what theme you choose.

http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/temp.html#wp1073214

Sent from Cisco Technical Support iPhone App

Re: Prime Infrastructure 1.3 AP Groups missing

kerstin-534 — Thu, 04 Apr 2013 12:45:36 GMT

thank you, it works

Re: Prime Infrastructure 1.3 AP Groups missing

Scott Fella — Thu, 04 Apr 2013 12:55:14 GMT

Good to know:)

Sent from Cisco Technical Support iPhone App