topic Re: How to adjust and manage bandwidth / speed of SSIDS.- WLC 9800 in Wireless

How to adjust and manage bandwidth / speed of SSIDS.- WLC 9800

kick534 — Thu, 06 Jun 2024 06:12:48 GMT

Dear team,

For the below configuration i need support, what will impact on the running network, and once I complete the configuration how i will test please advise.

conf t

policy-map rate-limit

class class-default

police rate 20m bps // The rate desired per client.

exit

set dscp default

police 20m // The rate desired per client.

exit

class-map match-any rate-limit

match any

exit

wireless profile policy <the name of the policy profile where we need to apply this.>

service-policy client input rate-limit

service-policy client output rate-limit

Re: How to adjust and manage bandwidth / speed of SSIDS.- WLC 9800

Leo Laohoo — Thu, 06 Jun 2024 06:18:50 GMT

1. Go to Configuration > Tags & Profiles > Policy.

2. Either create a new policy or, if already create it, pick the policy in question.

3. Go to the QOS and AVC tab.

4. Use the QoS SSID Policy to set an SSID-wide rate limit (meaning, everyone shares one bandwidth).

5. Use QoS Client Policy to set a rate limit per wireless user.

Re: How to adjust and manage bandwidth / speed of SSIDS.- WLC 9800

kick534 — Thu, 06 Jun 2024 06:41:10 GMT

is there any documentation avilable please share with me to review, and after implement how we will test the policy assigned or not.