topic Re: AP lost tag information when fallback to secondary wlc 9800 in Wireless

AP lost tag information when fallback to secondary wlc 9800

vishwash — Sat, 08 Jun 2024 10:20:44 GMT

AP lost tag information when fallback to secondary wlc 9800

primary wlc 9800 to secondary 9800 AP lost tag information and fallback to default tag

what need to enable the setting

Re: AP lost tag information when fallback to secondary wlc 9800

Mark Elsen — Sat, 08 Jun 2024 10:49:55 GMT

- FYI : https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-6/config-guide/b_wl_17_6_cg/m_ap_tag_persistency.html#config-ap-tag-persistence-on-the-controller

Re: AP lost tag information when fallback to secondary wlc 9800

balaji.bandi — Sat, 08 Jun 2024 11:05:01 GMT

what code running ? is this only TAG information all other configuration ok ?

Re: AP lost tag information when fallback to secondary wlc 9800

vishwash — Sat, 08 Jun 2024 16:52:36 GMT

it is 17.9.3 ..yeah i can see tag information is lost but hostname is still exist when switchover from one 9800 wlc to another wlc ..17.9.3 with AWS hosted WLC 9800 in flexconnect mode AP

Re: AP lost tag information when fallback to secondary wlc 9800

vishwash — Sat, 08 Jun 2024 16:53:15 GMT

*i have already enable that feature but still the same behavior ..i have 17.9.3 version with AWS hosted WLC 9800 in flexconnect mode AP

Re: AP lost tag information when fallback to secondary wlc 9800

Mark Elsen — Sat, 08 Jun 2024 17:04:04 GMT

- Note the beginning of the mentioned paragraph :
For an AP to preserve its policy tag, site tag, and RF tag configured from the primary controller, these tags must also exist on the other controllers that the AP connect to. If all the three tags do not exist, the AP applies the default policy tag, site tag, and RF tag. Similarly, the tag policy is applicable even if one or two tags exist. AP tag persistency helps in priming an AP in N+1 redundancy scenarios. For more information about configuring tags, see https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-6/config-guide/b_wl_17_6_cg/m_config_model.html.

Re: AP lost tag information when fallback to secondary wlc 9800

vishwash — Sat, 08 Jun 2024 17:34:14 GMT

i have same tag defined on both wlc and as well its N+1 ..i have enabled the feature of ap tag persistency enable on both wlc ..dont able to recoginzed when move from one wlc to other ...

one thing i notice the sh ap tag summary command , the source type is showing (Static) while as per cisco it should show source tyoe as (AP ) when fallback to other wlc

Re: AP lost tag information when fallback to secondary wlc 9800

Mark Elsen — Sun, 09 Jun 2024 06:00:57 GMT

>..., the source type is showing (Static)
Ref : https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-6/config-guide/b_wl_17_6_cg/m_ap_tag_persistency.pdf
>....If the Tag Source displays Static or Filter, it means that the AP tag mappings were configured on the primary
controller. If the source displays Default, it means that the AP received the default tags when joining the
controller.

Re: AP lost tag information when fallback to secondary wlc 9800

vishwash — Sun, 09 Jun 2024 06:37:28 GMT

sorry Marce , its my typo error .about tag AP,static term

can you help to idnetify what could be other issue why tag removed whenever failover happened ..

even after enable the feature (( ap tag prestience ))

Re: AP lost tag information when fallback to secondary wlc 9800

balaji.bandi — Sun, 09 Jun 2024 06:56:58 GMT

never seen that issue, may be bug, why not work with Cisco TAC ?

Re: AP lost tag information when fallback to secondary wlc 9800

Mark Elsen — Sun, 09 Jun 2024 16:53:42 GMT

- There are also some additional hints in this thread which you may want to review :
https://community.cisco.com/t5/wireless/9800-ha-n-1-retaining-ap-tags/td-p/4954251