Roaming between AP groups, but the same flexconnect group

jfaaborg — Tue, 02 Jul 2024 21:30:14 GMT

I have a situation where I need to advertise WLAN1 along with our standard WLAN2 in one area, while the rest of the area would just have our standard WLAN1. Would the APs be able to roam on WLAN1

This is on AireOS 8.10.190.0

Example below

AP group 1

WLAN1 - Test1

WLAN2 - Test2

AP group 2

WLAN1 - Test1

Flexconnect group1 (all APs in this group)

WLAN1 - Flexconnect to VLAN1

WLAN2 - Flexconnect to VLAN2

Thankx

Re: Roaming between AP groups, but the same flexconnect group

Mark Elsen — Wed, 03 Jul 2024 06:40:35 GMT

- FYI : https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/flexconnect_groups.html#ID1266

topic Roaming between AP groups, but the same flexconnect group in Wireless

Roaming between AP groups, but the same flexconnect group

Re: Roaming between AP groups, but the same flexconnect group