topic Re: Cisco Catalyst 9124E Outdoor Access Point in Wireless

Cisco Catalyst 9124E Outdoor Access Point

IrshadMohammed — Mon, 29 Jul 2024 16:16:52 GMT

Hi Team,

I am planning to use the Cisco Catalyst 9124E Outdoor Access Point along with the Cisco Aironet Four-Port Dual-Band Polarization-Diverse Antenna (AIR-ANT2513P4M-N) and the Cisco AIR-CAB005LL-R-N Low-Loss Antenna cable. However, I noticed that the CAB005LL-R-N cable has a male and female connector, whereas both the access point and antennas require N-Female bulkhead connectors.

Are there CAB005LL-R-N cables available with male connectors on both ends? If so, what is the part number?

Re: Cisco Catalyst 9124E Outdoor Access Point

Mark Elsen — Mon, 29 Jul 2024 17:08:56 GMT

- Check if you can find any in : https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=CAB005LL-R-N++two+male+connectors&_sacat=0&_odkw=CAB005LL-R-N+male+connector&_osacat=0

Re: Cisco Catalyst 9124E Outdoor Access Point

Haydn Andrews — Tue, 30 Jul 2024 00:25:11 GMT

Check out
https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-antennas-accessories/product_data_sheet09186a008008883b.html it has all the Cisco Cables, there are N types in there.

Keep in mind the cable extention will add dB loss to the antenna so recommendaiton is to keep as short as possible.

Can you not utilise the cable length that comes with the antenna?

Also I believe you need to order the antenna mounting kit as a seperate line item and potentially one for the AP