https://community.cisco.com/t5/wireless/rogue-detection-minimum-rssi-feature-with-wips/m-p/5158703#M274349 <P>I have tested and concluded that if the Rogue Detection Minimum RSSI is set to -80</P> <P>The AP will detect rogues with signal strength higher than -80 and will display them on the WLC.</P> <P>Simulates an attacker in position -85 and sends DeAuth. AP can detect and send DeAuth information to display on aWIPS on WLC.</P> Sat, 10 Aug 2024 00:42:20 GMT ReFeeL 2024-08-10T00:42:20Z https://community.cisco.com/t5/wireless/rogue-detection-minimum-rssi-feature-with-wips/m-p/5156241#M274156 <P>Does the Rogue Detection Minimum RSSI feature work with wIPS as well?</P> <P>Suppose I set the Rogue Detection Minimum RSSI to -80. This means that the AP will detect rogue with a signal strength higher than -80 and will display it on the WLC.</P> <P>Does this value affect wIPS as well? Let's say an attacker tries Disassociation / Deauthentication Flood at -85 range on WLC, will it be visible?</P> <P>&nbsp;</P> Tue, 06 Aug 2024 04:21:22 GMT https://community.cisco.com/t5/wireless/rogue-detection-minimum-rssi-feature-with-wips/m-p/5156241#M274156 ReFeeL 2024-08-06T04:21:22Z https://community.cisco.com/t5/wireless/rogue-detection-minimum-rssi-feature-with-wips/m-p/5158703#M274349 <P>I have tested and concluded that if the Rogue Detection Minimum RSSI is set to -80</P> <P>The AP will detect rogues with signal strength higher than -80 and will display them on the WLC.</P> <P>Simulates an attacker in position -85 and sends DeAuth. AP can detect and send DeAuth information to display on aWIPS on WLC.</P> Sat, 10 Aug 2024 00:42:20 GMT https://community.cisco.com/t5/wireless/rogue-detection-minimum-rssi-feature-with-wips/m-p/5158703#M274349 ReFeeL 2024-08-10T00:42:20Z