topic Re: ACL in Controller 4404 in Wireless

ACL in Controller 4404

paulo.s — Sun, 04 Jul 2021 01:15:32 GMT

Hi.

I read CWCS Configuration Guide release 5.1 about ACL, applied ACL to WLAN, but didn't work.

I want to restrict wireless client access any networks.

If anyone knows, please help me.

Thks.

Paulo MaurÃcio

Re: ACL in Controller 4404

dancampb — Thu, 12 Nov 2009 19:15:17 GMT

Keep in mind with ACLs on the controller they are written with the assumption that you are on the controller and traffic is coming from the wireless clients in regards to the inbound and outbound directions. Also you need to write an inbound and outbound rule for each condition. They aren't like IOS ACLs that will automatically allow the return traffic through.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807810d1.shtml

Re: ACL in Controller 4404

paulo.s — Thu, 12 Nov 2009 19:41:37 GMT

Thks for help.

I will test.

Re: ACL in Controller 4404

paulo.s — Fri, 13 Nov 2009 14:44:11 GMT

Ok, it works!!!

I found the error. I was configuring by WCS, and when I configured protocol to ANY, returned this message: Protocol : 256 : Value for this attribute is invalid. (Valid Range: is 0 <> 255 )

My WCS version is Version 5.1.64.0, and controller software version is 4.2.112.0.

Thks for help.