topic Re: catalyst 9800 boot old version after upgrade in Wireless

catalyst 9800 boot old version after upgrade

mfradin — Sat, 21 Sep 2024 16:19:11 GMT

hello

i tried to upgrade in "INSTALL" mode from 17.03.07 to 17.09.05
(I have no HA)

all seems to be ok during upgrade (see attached) , bootvar seems ok :
BOOT variable = bootflash:packages.conf,12;
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x10

but 9800 reboots on old version

is it strange that the packages.conf is not changed during upgrade ?

thanks, Marc

Re: catalyst 9800 boot old version after upgrade

Mark Elsen — Sat, 21 Sep 2024 16:52:56 GMT

According to the setting of the boot variable you seem to have multiple versions of packages.conf
this one end on ,12 ; could you have dir bootflash: check if there is a more recent and or last version
if so , set the boot variable accordingly and reload the controller again ,
(the reply has been corrected , for the time being take attention to above part only)

Re: catalyst 9800 boot old version after upgrade

balaji.bandi — Sat, 21 Sep 2024 16:40:18 GMT

As suggested check the config register first.

also i would like to see dir bootflash: or dir flash: all the files.

Also check the content of packages.conf

more bootflash:packages.conf - this should be pointing to new IOS XE packages.

have you looked at the upgrade steps :

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-9/config-guide/b_wl_17_9_cg/m_upgrade_9800cl.html

Re: catalyst 9800 boot old version after upgrade

Leo Laohoo — Sun, 22 Sep 2024 02:22:00 GMT

Post the complete output to the following command:

dir bootflash:*.conf more flash:packages.conf | begin rp_boot

I think I know what this bug is and I know the workaround.

Re: catalyst 9800 boot old version after upgrade

mfradin — Sun, 22 Sep 2024 09:10:40 GMT

Hello,
thanks for your replies

I changed the register and reload but the problem is the same

BOOT variable = bootflash:packages.conf,12;
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2102

c9800#sh version | in 17
Cisco IOS XE Software, Version 17.03.07
Cisco IOS Software [Amsterdam], C9800-CL Software (C9800-CL-K9_IOSXE), Version 17.3.7, RELEASE SOFTWARE (fc3)

c9800#dir bootflash:*.conf
Directory of bootflash:/*.conf

Directory of bootflash:/

   32 -rw-        2090   Jul 6 2023 12:45:12 +02:00 packages.conf
212162 -rw-        5580 Sep 21 2024 18:10:36 +02:00 C9800-L-universalk9_wlc.17.09.05.SPA.conf

c9800#more flash:packages.conf | in rp_boot
boot rp 0 0 rp_boot C9800-CL-rpboot.17.03.07.SPA.pkg

c9800#dir
Directory of bootflash:/

171361 drwx            65536 Sep 22 2024 10:35:17 +02:00 tracelogs
465121 drwx             4096 Sep 22 2024 10:18:01 +02:00 .installer
163201 drwx             4096 Sep 22 2024 10:16:19 +02:00 license_evlog
22      -rw-             1096 Sep 22 2024 10:16:17 +02:00 vlan.dat
19      -rw-              157 Sep 22 2024 10:16:17 +02:00 csrlxc-cfg.log
18      -rw-                0 Sep 22 2024 10:16:00 +02:00 cvac.log
17      -rw-               30 Sep 22 2024 10:16:00 +02:00 throughput_monitor_params
16      -rw-           134458 Sep 22 2024 10:15:09 +02:00 memleak.tcl
546721 drwx             4096 Sep 22 2024 10:14:53 +02:00 dc_profile_dir
628321 drwx             4096 Sep 21 2024 18:15:34 +02:00 .rollback_timer
212162 -rw-             5580 Sep 21 2024 18:10:36 +02:00 C9800-L-universalk9_wlc.17.09.05.SPA.conf
212164 -rw-         37647049 Sep 21 2024 18:10:36 +02:00 C9800-L-rpboot.17.09.05.SPA.pkg
212163 -rw-       1315144724 Sep 21 2024 18:09:38 +02:00 C9800-L-mono-universalk9_wlc.17.09.05.SPA.pkg
12      -rw-       1352554265 Sep 18 2024 17:44:25 +02:00 C9800-L-universalk9_wlc.17.09.05.SPA.bin
375361 drwx             4096 Jun 21 2024 11:40:25 +02:00 webui_helper
32      -rw-             2090   Jul 6 2023 12:45:12 +02:00 packages.conf
758884 -rw-         47096498   Jul 6 2023 12:40:50 +02:00 C9800-CL-rpboot.17.03.07.SPA.pkg
758883 -rw-       1095140380   Jul 6 2023 12:39:40 +02:00 C9800-CL-mono-universalk9.17.03.07.SPA.pkg
244801 drwx             4096   Jul 6 2023 11:56:28 +02:00 .prst_sync
114241 drwx             4096 Sep 12 2022 15:58:05 +02:00 .dbpersist
873121 drwx             4096   Jun 4 2021 03:21:38 +02:00 core
20      -rw-            96734 Mar 16 2021 15:49:29 +01:00 pnp-tech-discovery-summary
15      -rw-               35 Mar 16 2021 15:49:18 +01:00 pnp-tech-time
228481 drwx             4096 Mar 10 2021 11:39:44 +01:00 guest-share
595681 drwx             4096 Mar 10 2021 11:39:36 +01:00 onep
889441 drwx             4096 Mar 10 2021 11:38:41 +01:00 virtual-instance
73441   drwx             4096 Mar 10 2021 11:38:31 +01:00 bootlog_history
359041 drwx             4096 Mar 10 2021 11:38:28 +01:00 iox
11      drwx            16384 Mar 10 2021 11:33:58 +01:00 lost+found

14822125568 bytes total (9197740032 bytes free)

regards

Marc

Re: catalyst 9800 boot old version after upgrade

Mark Elsen — Sun, 22 Sep 2024 11:32:39 GMT

>...c9800#more flash:packages.conf | in rp_boot
Considering the settings of the BOOT variable , please instead provide the output from
more flash:packages.conf,12 | in rp_boot

Re: catalyst 9800 boot old version after upgrade

Leo Laohoo — Sun, 22 Sep 2024 11:50:28 GMT

Thanks for the output. This is an easy fix.

rename bootfash:packages.conf bootflash:packages.conf.bak copy bootflash:C9800-L-universalk9_wlc.17.09.05.SPA.conf bootfash:packages.conf

And then reboot the WLC.

Re: catalyst 9800 boot old version after upgrade

Mark Elsen — Sun, 22 Sep 2024 11:55:41 GMT

@Leo Laohoo I sustain your remarks, but I also see :
BOOT variable = bootflash:packages.conf,12;
Then the boot variable should be set too simple bootflash:packages.conf too (without any version extension)

I also see in a bin file there in there too ; it's flash is a bit messed up , possibly resulting from
conversion between modes (install vs bundle)

Re: catalyst 9800 boot old version after upgrade

balaji.bandi — Sun, 22 Sep 2024 11:56:54 GMT

Looks like Upgrade broken some where, below conf should be packages.conf

212162 -rw- 5580 Sep 21 2024 18:10:36 +02:00 C9800-L-universalk9_wlc.17.09.05.SPA.conf

take the backup packages.conf or move to different name,

copy C9800-L-universalk9_wlc.17.09.05.SPA.conf packages.conf ( and reload and test it)

Re: catalyst 9800 boot old version after upgrade

Leo Laohoo — Mon, 23 Sep 2024 00:24:07 GMT

If I remembered correctly, "12" translate to "attempt to boot 12 times before going to ROMMON".

Re: catalyst 9800 boot old version after upgrade

Leo Laohoo — Mon, 23 Sep 2024 00:29:36 GMT

@balaji.bandi wrote:
Looks like Upgrade broken some where

This is a very well-known bug that has been in existence since IOS-XE version 16.X.X.

I've documented this behaviour (including the "fix" or workaround) in the Gotcha section.

Cisco 3850: IOS-XE/Firmware Upgrade

This is also the bug I avoid hitting if my One-Hit-Wonder (NSFW) process is used.