Does C9124AXI-E -require a 9800 controller in bridge mode

robert.jubb — Wed, 09 Oct 2024 13:34:58 GMT

Does C9124AXI-E -require a 9800 controller in bridge mode?

Re: Does C9124AXI-E -require a 9800 controller in bridge mode

jagan.chowdam — Wed, 09 Oct 2024 14:00:53 GMT

Hi Robert,

AP for outdoor environments, with external antennas

C9124AXE-x

The AP has 6 external antenna ports and contains a 2.4–GHz and 5–GHz radio with an option to configure in centralized and Flexconnect mode.

This is a stand alone unit that can be wall, pole or tower mounted. It can also operate as a relay node for other access points that are not directly connected to a wired network.

Cisco 9124AXE in EWC (Embedded Wireless Controller) mode (SKU C9124AXE-EWC-x) doesn't require a 9800 WLC.

Refer the post for

https://community.cisco.com/t5/wireless/wireless-bridge-between-two-c9124axe/td-p/4847399

Jagan Chowdam

/**Pls rate useful response**/

topic Does C9124AXI-E -require a 9800 controller in bridge mode in Wireless

Does C9124AXI-E -require a 9800 controller in bridge mode

Re: Does C9124AXI-E -require a 9800 controller in bridge mode