topic Re: 5417 Dynamic Authorization failed in Wireless

5417 Dynamic Authorization failed

Leo TI — Wed, 28 Aug 2024 18:31:25 GMT

Failure Reason: 11213 No response received from Network Access Device after sending a Dynamic Authorization request

Hello friends
I have an ise VM 3.1.0.518, a 9800 VM controller 17.9.4a, with a guest user redirection page, everything works fine, the client authenticates successfully but does not access the internet, checking I see that the authorization fails. I tested it with another 2504 controller and it works fine.

Re: 5417 Dynamic Authorization failed

Mark Elsen — Wed, 28 Aug 2024 19:09:05 GMT

- FYI : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwc49580
It's probably a bug in ISE , make sure to be at least at versions mentioned in
Known Fixed Releases ; or above

Re: 5417 Dynamic Authorization failed

Leo TI — Thu, 29 Aug 2024 13:07:02 GMT

thanks for the helpI have updated my ISE to patch version 5.
But I still have the same problems

Re: 5417 Dynamic Authorization failed

MHM Cisco World — Thu, 29 Aug 2024 13:22:01 GMT

Policy profile > advanced > aaa policy

Enable both

Allow aaa override

NAC state

MHM

Re: 5417 Dynamic Authorization failed

Leo TI — Thu, 29 Aug 2024 13:41:20 GMT

Hi MHM

Re: 5417 Dynamic Authorization failed

MHM Cisco World — Thu, 29 Aug 2024 13:45:56 GMT

Aaa radius server

Did you enable CoA ?

Did you config CoA server and it key ?

MHM

Re: 5417 Dynamic Authorization failed

Mark Elsen — Thu, 29 Aug 2024 13:59:58 GMT

- Report to TAC ,

Re: 5417 Dynamic Authorization failed

Leo TI — Thu, 29 Aug 2024 14:00:44 GMT

Thank you very much for putting the information in this field (although it disappears here) and it worked, that's the problem

Re: 5417 Dynamic Authorization failed

MHM Cisco World — Thu, 29 Aug 2024 14:03:02 GMT

Friend you are so welcome

Have a nice day

MHM

Re: 5417 Dynamic Authorization failed

Knutsen2004 — Fri, 15 Nov 2024 18:47:06 GMT

Hi i have simular issue - what was the solution here ?