topic Re: wlc 9800 config with ise in Wireless

wlc 9800 config with ise

shlomoi — Mon, 23 Dec 2024 22:12:21 GMT

Hi ,
We recently installed a new 9800 controller. I am trying to connect the controller to ISE in 2 ways.
1. For portable terminal with MAC authentication.
2. For 802.1X users

Is there a guide?

thanks

Re: wlc 9800 config with ise

MHM Cisco World — Mon, 23 Dec 2024 22:20:03 GMT

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/213919-configure-802-1x-authentication-on-catal.html

MHM

Re: wlc 9800 config with ise

Flavio Miranda — Mon, 23 Dec 2024 22:20:05 GMT

@shlomoi

You can follow this guide.

Actually, you just need to add the ISE as Radius server for MAB and 802.1x. There will be more to do when creating the SSIDs, of course. But, related to adding ISE to WLC, this guide below cover pretty much everything.

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/214490-configure-radius-and-tacacs-for-gui-and.html

Re: wlc 9800 config with ise

MHM Cisco World — Mon, 23 Dec 2024 22:21:25 GMT

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/213920-central-web-authentication-cwa-on-cata.html

for portal which is called CWA

MHM

Re: wlc 9800 config with ise

shlomoi — Wed, 25 Dec 2024 08:41:02 GMT

Thanks, but how do I check that the controller is properly connected to ISE?