topic Re: AP CW9163E-F Joined WLC 9800 but Operation Status is Down in Wireless

AP CW9163E-F Joined WLC 9800 but Operation Status is Down

antonprasetyo — Sat, 22 Mar 2025 06:49:34 GMT

Hello Masters,

Our customer just brought multiple Access Point CW9163E-F recently, and we have successfully joined them into WLC 9800. But no matter what we do we cannot bring the operation status to UP. We have already change the country id into "ID", and any country but the 5G, 2.4G, operation status is still down.

This is the current status from WLC (using ver.17.12.5) :

#sh ap sum
Number of APs: 1

CC = Country Code
RD = Regulatory Domain

AP Name Slots AP Model Ethernet MAC Radio MAC CC RD IP Address State Location
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
APC414.A26D.18D0 3 CW9163E-F c414.a26d.18d0 087b.8739.3980 ID -F 10.170.10.127 Registered default location

#sh ap profile name default-ap-profile detailed

AP Profile Name : default-ap-profile
Description : default ap profile
Country code : ID
Stats Timer : 180
Link Latency : DISABLED
Data Encryption : DISABLED
LED State : ENABLED
NTP server : 0.0.0.0
NTP Authentication : DISABLED
Jumbo MTU : DISABLED
24ghz Report Interval : 90
5ghz Report Interval : 90
bssid stats status : DISABLED
bssid stats frqncy interval : 30
bssid neighbor stats status : DISABLED
bssid neighbor stats interval : 180

#sh ap dot11 24ghz summary
* global assignment

AP Name Mac Address Slot Admin State Oper State Width Txpwr Channel Mode
---------------------------------------------------------------------------------------------------------------------------------------------------------
APC414.A26D.18D0 087b.8739.3980 0 Enabled Down 20 *1/1 (-96 dBm) (1) REAP

#sh ap dot11 5ghz summary
* global assignment

And this is the error generated from AP Console :

Mar 21 12:54:35 APC414 kernel: [03/21/2025 05:54:35.3088] DOT11_CFG[0]: Country not in Supported list:ID .
Mar 21 12:54:35 APC414 kernel: [03/21/2025 05:54:35.3154] DOT11_TXP[0]:The channel list is empty for slot - 0 for the configured reg-domain

Mar 21 12:54:35 APC414 kernel: [03/21/2025 05:54:35.5449] DOT11_CFG[1]: Country not in Supported list:ID .

Mar 21 12:54:35 APC414 kernel: [03/21/2025 05:54:35.5495] DOT11_TXP[1]:The channel list is empty for slot - 1 for the configured reg-domain

Can anyone guide us what can we do to solve this problem ?

Thank You,

Re: AP CW9163E-F Joined WLC 9800 but Operation Status is Down

Mark Elsen — Sat, 22 Mar 2025 07:13:53 GMT

- It looks like the country code used by the AP is not configured on the controller,

Re: AP CW9163E-F Joined WLC 9800 but Operation Status is Down

Leo Laohoo — Sat, 22 Mar 2025 07:34:53 GMT

@antonprasetyo wrote:

Mar 21 12:54:35 APC414 kernel: [03/21/2025 05:54:35.3088] DOT11_CFG[0]: Country not in Supported list:ID .

Post the complete output to the command "sh run | include country".

Re: AP CW9163E-F Joined WLC 9800 but Operation Status is Down

antonprasetyo — Sat, 22 Mar 2025 09:50:57 GMT

Hi Leo,

#sh run | i country
wireless country ID
country ID
country ID

#sh wireless country configured

Configured Country.......................... ID - Indonesia
Configured Country Codes
ID - Indonesia 802.11a Indoor,Outdoor/ 802.11b Indoor,Outdoor/ 802.11g Indoor,Outdoor/

Re: AP CW9163E-F Joined WLC 9800 but Operation Status is Down

antonprasetyo — Sat, 22 Mar 2025 09:46:40 GMT

Hi Marce,

I have already sett the country ID in two different places,
1. in ap join profile, sett to "ID"

2. In wireless/ap/country

but no luck...

Re: AP CW9163E-F Joined WLC 9800 but Operation Status is Down

Mark Elsen — Sat, 22 Mar 2025 11:13:29 GMT

- @antonprasetyo 1) Issue the CLI command : wireless config validate
2) Checkout the WLC 9800 controller's configuration using the CLI command :
show tech wireless and feed the output from that into Wireless Config Analyzer
Use the full command denoted in green, do not use a simple show tech-support for this procedure.

Re: AP CW9163E-F Joined WLC 9800 but Operation Status is Down

Rich R — Sat, 22 Mar 2025 13:45:35 GMT

I don't think Indonesia is supported on 9163E in 17.12.x ...
See https://www.cisco.com/c/en/us/support/wireless/catalyst-9100ax-access-points/products-technical-reference-list.html

Detailed Channels and Maximum Power Settings for Cisco Catalyst Wireless 9163E Access Points, Release 17.12.3 (XLSX - 12 MB) 17/Apr/2024 - Indonesia is missing from the country mappings
Detailed Channels and Maximum Power Settings for Cisco Catalyst Wireless 9163E Access Points, Release 17.15.1 (XLSX - 13 MB) 02/Sep/2024 - Indonesia is now in the country mappings

Provide the output from?

show wireless country channels

So I think you need to upgrade to 17.15.2 - see the release notes:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-15/release-notes/rn-17-15-9800.html#whats-new-17151

Tier B/C/D Country Support for Cisco Catalyst 9163E Outdoor Access Points

From this release, Cisco Catalyst 9163E Outdoor APs are supported in the following countries: Bosnia, Hong Kong, India,
Indonesia, Israel, Jordan, Kuwait, Puerto Rico, Qatar, Saudi Arabia, Singapore, South Africa, Taiwan, Turkey, and United
Arab Emirates.
For more information, see Countries and Regulations.

Re: AP CW9163E-F Joined WLC 9800 but Operation Status is Down

antonprasetyo — Sat, 22 Mar 2025 14:05:03 GMT

Hi Rich,

Thank you so much for the document, let me upgrade my wlc first, and hopefully it's as the doc said..

============

Update : It's exactly as you mentioned Rich, thank you so much again and for all who reply my thread.

I've been wondering why cisco send this product using firmware that they know that is not supported in its shipping address area (Indonesia), why cisco, i demand an explanation....

Re: AP CW9163E-F Joined WLC 9800 but Operation Status is Down

Rich R — Sat, 22 Mar 2025 14:20:29 GMT

You're welcome <smile>

> I've been wondering why cisco send this product using firmware that they know that is not supported in its shipping address area (Indonesia), why cisco, i demand an explanation....

Unlikely you'll get any reply to that here from Cisco. I expect the answer is simply that their manufacturing and shipping process does not allow for minor nuances like this. The ordering tool used to require to select the software version but for these APs it doesn't, so the factory obviously just use the same version on all 9163E.

Re: AP CW9163E-F Joined WLC 9800 but Operation Status is Down

antonprasetyo — Sat, 22 Mar 2025 14:36:35 GMT

Well at least this is a big problem for me (and my team), 50 APs, but none of them can't broadcast SSID. I even tried to change the AP mode into "survey mode" just to ensure that i don't make any mistake in the config somehow.

Re: AP CW9163E-F Joined WLC 9800 but Operation Status is Down

Mark Elsen — Sat, 22 Mar 2025 15:32:52 GMT

- @antonprasetyo : ...but none of them can't broadcast SSID

Please look into these items which I mentioned :
https://community.cisco.com/t5/wireless/ap-cw9163e-f-joined-wlc-9800-but-operation-status-is-down/m-p/5274140/highlight/true#M281868

These are major troubleshooting steps!!

Re: AP CW9163E-F Joined WLC 9800 but Operation Status is Down

Rich R — Sat, 22 Mar 2025 20:11:52 GMT

Like @Mark Elsen says this is now likely a config issue so concentrate on that as advised.
Config Analyzer will pick up many common mistakes in your config, and report anything that isn't in line with the best practice guide.

Also note that 6GHz is not currently supported on that AP in Indonesia so you can only use the 2.4GHz and 5GHz bands.