FlexConnect / Local Mode Switch settings difference

CCC3 — Mon, 31 Mar 2025 23:50:57 GMT

backbone - C9800
l
Poe switch
l
AP

When it's the most basic structure

when flexconnect and local mode
How are the settings different for the backbone/poe switch?

For example
When flexconnect, the backbone and Poe must have the ap management vlan and SVI, the user band vlan and SVI, and set to trunk at the port where the Poe switch's ap is connected (allowed is optional)
Can you explain it with this example?

Re: FlexConnect / Local Mode Switch settings difference

srimal99 — Tue, 01 Apr 2025 07:52:51 GMT

@CCC3 Cisco has a good article about flex connect link provided below

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/213945-understand-flexconnect-on-9800-wireless.html

topic FlexConnect / Local Mode Switch settings difference in Wireless

FlexConnect / Local Mode Switch settings difference

Re: FlexConnect / Local Mode Switch settings difference