topic Re: Wireless traffic shaping in Wireless

Wireless traffic shaping

sqambera — Mon, 05 Jul 2021 16:26:54 GMT

Hello,

I have a wireless controller in HQ to which an AP connects in the branch. On the branch router I want to match traffic in the ACL that is sourced from AP and destined to controller which I am able to do using IP address of AP as source and controller as destination. However, I can't match traffic on the HQ router by an ACL specifying controller as source and AP as destination. Can anyone please help me to know how can I match traffic from controller to AP? All I know is that a CAPWAP tunnel is formed between AP and controller.

Thanks,

Qamber

Re: Wireless traffic shaping

Rasika Nayanajith — Wed, 14 Nov 2018 01:57:55 GMT

Is there a way to match traffic based on UDP 5246 & 5247? That should be the CAPWAP traffic & you should be able to see your WLC & AP IP as src/dst on those packets.

HTH

Rasika

*** Pls rate all useful responses ***

Re: Wireless traffic shaping

sqambera — Thu, 15 Nov 2018 15:42:51 GMT

Thanks Rasika. I tried that but it matches only from AP to controller and not other way around.