<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic Re: C9105AXW-B Will Not Download Update | WLC 17.12.5 | C9800-40-K9 in Wireless</title>
    <link>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321372#M285571</link>
    <description>&lt;P&gt;&amp;gt;&amp;nbsp;&lt;SPAN&gt;And check the AP's flash for&amp;nbsp;&lt;/SPAN&gt;&lt;A href="https://quickview.cloudapps.cisco.com/quickview/bug/CSCwe97901" target="_blank" rel="noopener"&gt;CSCwe97901&lt;/A&gt;&lt;SPAN&gt;,&amp;nbsp;&lt;/SPAN&gt;&lt;A href="https://quickview.cloudapps.cisco.com/quickview/bug/CSCwm08044" target="_blank" rel="noopener"&gt;CSCwm08044&lt;/A&gt;&lt;SPAN&gt;,&amp;nbsp;&lt;/SPAN&gt;&lt;A href="https://quickview.cloudapps.cisco.com/quickview/bug/CSCwm72142" target="_blank" rel="noopener"&gt;CSCwm72142&lt;/A&gt;&lt;SPAN&gt;.&lt;/SPAN&gt;&lt;BR /&gt;Which is why I said "&lt;SPAN&gt;Have you power cycled?" - all of those are resolved by power cycling the AP.&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN&gt;And how the hell did the MTU get set to 2044?&amp;nbsp; Anyway the factory default reset would set that back to 1500 which is generally fine.&amp;nbsp; Good spot&amp;nbsp;&lt;a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/326026"&gt;@Leo Laohoo&lt;/a&gt;&amp;nbsp;although that may not be the cause of this, still good to fix it.&lt;/SPAN&gt;&lt;/P&gt;</description>
    <pubDate>Sun, 17 Aug 2025 07:31:35 GMT</pubDate>
    <dc:creator>Rich R</dc:creator>
    <dc:date>2025-08-17T07:31:35Z</dc:date>
    <item>
      <title>C9105AXW-B Will Not Download Update | WLC 17.12.5 | C9800-40-K9</title>
      <link>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321045#M285550</link>
      <description>&lt;P&gt;Hello All,&lt;/P&gt;&lt;P&gt;Below is the log of an AP that will not download an update from our only WLC. It looks like a successful communication to the controller but the image does not seem to download. I am unsure if its an issue with the AP, controller, or the network. It appears to be stuck in a loop regarding "discarding msg CAPWAP" Any help would be appreciated!&amp;nbsp;&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;PRE&gt;Welcome to Cisco.

Usage of this device is governed by Cisco's End User License Agreement,
available at:
http://www.cisco.com/c/en/us/td/docs/general/warranty/English/EU1KEN_.html.


             Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c) of the Commercial
Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

            Cisco Systems, Inc.
            170 West Tasman Drive
            San Jose, California 95134-1706

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html


This product contains some software licensed under the
"GNU Library General Public License, version 2" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Library
General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html


This product contains some software licensed under the
"GNU Lesser General Public License, version 2.1" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Lesser
General Public License, version 2.1", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html


This product contains some software licensed under the 
"GNU General Public License, version 3" provided with 
ABSOLUTELY NO WARRANTY under the terms of  
"GNU General Public License, Version 3", available here: 
http://www.gnu.org/licenses/gpl.html.


This product contains some software licensed under the
"GNU Affero General Public License, version 3" provided
with ABSOLUTELY NO WARRANTY under the terms of
"GNU Affero General Public License, version 3", available here:
http://www.gnu.org/licenses/agpl-3.0.html.

Press S for a shell, or another magic key...

[  OK  ] Created slice -.slice.
[  OK  ] Created slice system.slice.
         Starting Cisco UBIFS reformat/mount...
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-sshd\x2dkeygen.slice.
[*01/01/1970 00:00:54.8340] root: Cisco Axel file system mounting
[  OK  ] Reached target Cisco File Systems (Pre).
[  OK  ] Reached target Slices.
[  OK  ] Listening on Delayed Shutdown Socket.
[  OK  ] Reached target Timers.
[  OK  ] Reached target Sockets.
[  OK  ] Started Cisco UBIFS reformat/mount.
         Starting Cisco early mount...
[  OK  ] Started Cisco early mount.
[  OK  ] Reached target Local File Systems (Pre).
         Starting Cisco seed generation...
         Starting Cisco system time setup...
         Starting Cisco platform file generation...
[*01/12/2021 23:59:59.0290] Last reload time: Mar 17 16:51:28 2025
[*03/17/2025 16:51:28.0000] Setting system time Mon Mar 17 16:51:28 UTC 2025
         Starting Cisco fips check...
[  OK  ] Started Cisco seed generation.
[  OK  ] Started Cisco system time setup.
[  OK  ] Started Cisco fips check.
[  OK  ] Started Cisco platform file generation.
         Starting Cisco btldr service...
[  OK  ] Started Cisco btldr service.
[  OK  ] Reached target Local File Systems.
[  OK  ] Started Cisco system time saving.
         Starting Cisco system time saving...
         Starting Cisco pkg install service...
         Starting Cisco S10 boot service...
[*03/17/2025 16:51:28.3890] GCM-128 POST passed
[*03/17/2025 16:51:28.3890] GCM-256 POST passed
[*03/17/2025 16:51:28.5920] 
[*03/17/2025 16:51:28.5920] [3/17/2025 16:52:29] : Shadow is now in-synced with master
         Starting Cisco act2 check...
[*03/17/2025 16:51:29.1480] 24
[03/17/2025 16:51:29.6490] bcmlibs: module license 'Proprietary' taints kernel.
[03/17/2025 16:51:29.7330] Disabling lock debugging due to kernel taint
[03/17/2025 16:51:30.1150] Bind blog_notify_evt_enqueue_fn[&amp;lt;be1b0fb0&amp;gt;]
[03/17/2025 16:51:30.1900] max_ent = 16384 intvl_msec = 10000 num_slices = 2000 num_ent = 9 period_msec = 5 
[03/17/2025 16:51:30.3050] NBUFF v1.0 Initialized
[03/17/2025 16:51:30.3810] Total # of labels = 68
[03/17/2025 16:51:30.4490] Initialized fcache state
[03/17/2025 16:51:30.5190]      Pkt HW acceleration is disabled/unavailable.
[03/17/2025 16:51:30.5960] Broadcom Packet Flow Cache  Char Driver v4.0 Registered&amp;lt;302&amp;gt;
[03/17/2025 16:51:30.7030]      Pkt HW acceleration is disabled/unavailable.
[03/17/2025 16:51:30.7810] [FHW]  pktDbgLvl[0xbe1c8684]=0
[03/17/2025 16:51:30.8540] [FHW]  fhw_construct: 
[03/17/2025 16:51:30.9740] Broadcom Command List Driver v1.0
[03/17/2025 16:51:31.1060] Broadcom Archer Packet Accelerator Intializing
[03/17/2025 16:51:31.2000] Open archer Netdevice
[03/17/2025 16:51:31.2520] Archer DS DPI Initialized
[03/17/2025 16:51:31.3090] Archer US DPI Initialized
[03/17/2025 16:51:31.3650] Sysport 0 WOL IRQ 53
[03/17/2025 16:51:31.4170] Sysport 1 WOL IRQ 59
[03/17/2025 16:51:31.4680] SYSPORT Driver Constructed (Budget: 128, Coalescing: 826828 nsec)
[03/17/2025 16:51:31.5660] Archer Mode set to L2+L3
[03/17/2025 16:51:31.6210] Archer Mode set to L3
[03/17/2025 16:51:31.6740] Initialized Archer Host Layer
[03/17/2025 16:51:31.7350] Flow Table (288, 72): f1dbe000, 4718592 bytes
[03/17/2025 16:51:31.8170] Flow Info Table (44, 65536): f2242000, 2883584 bytes
[03/17/2025 16:51:31.9060] Command List Table (128): virt 0xd7000000, phys 0x17000000, size 2097152 bytes
[03/17/2025 16:51:32.0200] Command List Control Table (8): d7780000, 131072 bytes
[03/17/2025 16:51:32.1070] Sysport Classifier Initialized: Maximum 16384 flows
[03/17/2025 16:51:32.1900] Archer IQ status changed from 0 to 1
[03/17/2025 16:51:32.2590] [NTC bitpool] idx_pool_init: 551:FHW[0]:Create Index Pool_Size = 16384
[03/17/2025 16:51:32.3760] Retrieve num_fhw_path=64
[03/17/2025 16:51:32.4330] Enabled Archer binding to Flow Cache
[03/17/2025 16:51:32.5010] Broadcom Archer Network Processor Char Driver v0.1 Registered &amp;lt;339&amp;gt;
[03/17/2025 16:51:32.6160] Archer TCP Pure ACK Enabled
[03/17/2025 16:51:32.7490] 
[03/17/2025 16:51:32.7490] Detecting PHYs...
[03/17/2025 16:51:32.8280]  Lift PHY at address 28 out of Reset by GPIO:33 Active Low
[03/17/2025 16:51:32.9280] 54991EL  B0 3590:5089 --&amp;gt; 0x1c 
[03/17/2025 16:51:32.9920] 
[03/17/2025 16:51:32.9920] Loading firmware into detected PHYs...
[03/17/2025 16:51:32.9920] 
[03/17/2025 16:51:33.1230] Firmware version: Blackfin B0 v02-02-03-2020-03-16
[03/17/2025 16:51:33.2050] Loading firmware into PHYs: map=0x10000000 count=1
[03/17/2025 16:51:33.2880] Halt the PHYs processors operation
[03/17/2025 16:51:33.3560] Upload the firmware into the on-chip memory
[  OK  ] Started Cisco act2 check.
75%
[03/17/2025 16:51:41.0270] audit_printk_skb: 102 callbacks suppressed
76%/17/2025 16:51:41.1040] 
78%/17/2025 16:51:41.1880] 
[  OK  ] Started Cisco pkg install service.
100%17/2025 16:51:41.4100] 
[03/17/2025 16:51:43.4870] Reset the processors to start execution of the code in the on-chip memory
[03/17/2025 16:51:43.5950] Verify that the processors are running: OK
[03/17/2025 16:51:44.1500] Verify that the firmware has been loaded with good CRC: OK
[03/17/2025 16:51:44.2430] Firmware loading completed successfully
[03/17/2025 16:51:44.2430] 
[03/17/2025 16:51:44.5100] !!!Initialize MAC port vlan and map completed! add 3 LLDP handling!!!
[03/17/2025 16:51:44.6450] !!!Initialize MAC port vlan and map completed! add 3 LLDP handling!!!
[03/17/2025 16:51:44.7790] !!!Initialize MAC port vlan and map completed! add 3 LLDP handling!!!
[03/17/2025 16:51:44.9140] !!!Initialize MAC port vlan and map completed! add 3 LLDP handling!!!
[03/17/2025 16:51:45.0490] !!!Initialize MAC port vlan and map completed! add 3 LLDP handling!!!
[03/17/2025 16:51:45.1650] getrcal for res select 5, int 654, ext 636, ratio 124 ratio1 144, rcal 9
[03/17/2025 16:51:45.2700] Setting SGMII Calibration value to 0x9
[03/17/2025 16:51:45.3400]     PLL_PON(8051): 0x0250; TX_PON(8067): 0x0048; RX_PON(80b2): 0x0980
[03/17/2025 16:51:45.9580] !!!Initialize MAC port vlan and map completed! add 3 LLDP handling!!!
[03/17/2025 16:51:46.0650] SYSPORT Host Binding Successfull
[03/17/2025 16:51:46.1310] logical_port 0, intf_index 0, phys_port 0 -&amp;gt; port_index 0, 8 queues
[03/17/2025 16:51:46.2320] logical_port 1, intf_index 1, phys_port 0 -&amp;gt; port_index 0, 8 queues
[03/17/2025 16:51:46.3320] logical_port 2, intf_index 1, phys_port 1 -&amp;gt; port_index 0, 8 queues
[03/17/2025 16:51:46.4320] logical_port 3, intf_index 1, phys_port 2 -&amp;gt; port_index 0, 8 queues
[03/17/2025 16:51:46.5320] logical_port 4, intf_index 1, phys_port 3 -&amp;gt; port_index 0, 8 queues
[03/17/2025 16:51:46.6320] logical_port 5, intf_index 1, phys_port 5 -&amp;gt; port_index 0, 8 queues
[03/17/2025 16:51:46.6320] SYSPORT[0] = SWITCH_NONE
[03/17/2025 16:51:46.6320] SYSPORT[1] = SWITCH_EXTERNAL
[03/17/2025 16:51:46.6320] System Port Software TM Initialized
[03/17/2025 16:51:46.6320] RXQ[0]: IRQ 48, CPU 3
[03/17/2025 16:51:46.6320] CSB Initialized: 0xd6cdf000 (0xd6cdf000), size 64 (128)
[03/17/2025 16:51:46.6320] Ports 1, TDMA Rings 8
[03/17/2025 16:51:46.6320] Archer DMA Layer Initialized
[03/17/2025 16:51:46.6320] Sysport Recycle Task: IRQ 49, CPU 3
[03/17/2025 16:51:46.6320] System Port Software TM Initialized
[03/17/2025 16:51:46.6320] RXQ[0]: IRQ 54, CPU 3
[03/17/2025 16:51:46.6320] CSB Initialized: 0xd6dcf000 (0xd6dcf000), size 64 (128)
[03/17/2025 16:51:46.6320] Ports 1, TDMA Rings 8
[03/17/2025 16:51:46.6320] Archer DMA Layer Initialized
[03/17/2025 16:51:46.6320] Sysport Recycle Task: IRQ 55, CPU 3
[03/17/2025 16:51:46.6320] Sysport TM Enabled
[03/17/2025 16:51:46.6320] dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered 
[03/17/2025 16:51:47.7200] getrcal for res select 5, int 654, ext 636, ratio 124 ratio1 144, rcal 9
[*     ] A start job is running for Cisco S10 boot service (23s [03/17/2025 16:51:49.3890] Archer IQ status changed from 1 to 0
/ 1min 32s)[*03/17/2025 16:51:29.3210] Active ve[03/17/2025 16:51:49.5050] Archer IQ status changed from 0 to 1
rsion: 17.9.5.47
[*03/17/2025 16:51:29.3270] Backup version: 17.9.4.202
[*03/17/2025 16:51:29.6290] Loading BCM modules ...
[*03/17/2025 16:51:29.6290] Load bcmlibs.ko
[*03/17/2025 16:51:29.8100] BCMLIBS loaded...
[*03/17/2025 16:51:29.8390] Load wlcsm.ko
[*03/17/2025 16:51:29.8940] Load bdmf.ko
[*03/17/2025 16:51:29.9680] Load proclikefs.ko
[*03/17/2025 16:51:30.0140] Load chipinfo.ko
[*03/17/2025 16:51:30.0320] brcmchipinfo: brcm_chipinfo_init entry
[*03/17/2025 16:51:30.0610] Load pktflow.ko
[*03/17/2025 16:51:30.1150] Broadcom Packet Flow Cache 
[*03/17/2025 16:51:30.1150] FCACHE_CONFIG_MAX_FLOW_ENTRIES&amp;lt;16384&amp;gt;
[*03/17/2025 16:51:30.1150] FCACHE_CONFIG_MAX_FDB_ENTRIES&amp;lt;1024&amp;gt;
[*03/17/2025 16:51:30.1150] FCACHE_CONFIG_MAX_HOST_DEV_ENTRIES&amp;lt;64&amp;gt;
[*03/17/2025 16:51:30.1150] FCACHE_CONFIG_MAX_HOST_MAC_ENTRIES&amp;lt;32&amp;gt;
[*03/17/2025 16:51:30.1150] npe_max_entries&amp;lt;32768&amp;gt;
[*03/17/2025 16:51:30.1900] fc_evt task created successfully
[*03/17/2025 16:51:30.7030] fc_timer_task created successfully
[*03/17/2025 16:51:30.7810] Created Proc FS /procfs/fcache
[*03/17/2025 16:51:30.7810] Broadcom Packet Flow Cache registered with netdev chain
[*03/17/2025 16:51:30.7810] Broadcom Packet Flow Cache learning via BLOG enabled.
[*03/17/2025 16:51:30.9190] Initialized Fcache HW accelerator layer state
[*03/17/2025 16:51:30.9190] flwStatsThread created. numFlwsPerPoll 546 maxFlwIdx 16383
[*03/17/2025 16:51:30.9200] Fcache Pathstats created
[*03/17/2025 16:51:30.9200] Constructed Broadcom Packet Flow Cache v4.0
[*03/17/2025 16:51:30.9480] Load cmdlist.ko
[*03/17/2025 16:51:31.0670] Load archer.ko
[*03/17/2025 16:51:32.4320] Pathstats allocated 2048 bytes
[*03/17/2025 16:51:32.4320] Broadcom Packet Flow Cache HW acceleration enabled.
[*03/17/2025 16:51:32.7030] Load bcm_enet.ko
[*03/17/2025 16:51:32.7490] crossbar Mux: connect cb_idx:0  int_ep 0 to ext_ep 2
[*03/17/2025 16:51:32.7490] crossbar Mux: connect cb_idx:0  int_ep 1 to ext_ep -1
[*03/17/2025 16:51:34.0020] 
[*03/17/2025 16:51:34.0020] Authenticating ACT2 ID:C9105                Authenticating SN:PSZ24401AFK
[*03/17/2025 16:51:34.0030] 
[*03/17/2025 16:51:34.0030] (ACT2Boot) Hardware is Cisco (c) authentic :-)
[*03/17/2025 16:51:34.0030] 
[*03/17/2025 16:51:34.0130] Seeding /dev/urandom from ACT2
[*03/17/2025 16:51:35.5670] Reading ACT2 SUDI certificates
[*03/17/2025 16:51:39.6560] 
[*03/17/2025 16:51:39.6560] ACT2 Check passed
[*03/17/2025 16:51:39.6560] 
[*03/17/2025 16:51:46.1310] eth0: Down &amp;lt;68:7D:B4:1C:C1:C0&amp;gt; &amp;lt;IntSw P0, Logical 00&amp;gt; PHY_ID &amp;lt;0x0007f008:0x08: On-chip 1G GPHY&amp;gt; Cfg: ANG.1G; Down 
[*03/17/2025 16:51:46.1310] eth1: Down &amp;lt;2C:F8:9B:1C:DD:00&amp;gt; &amp;lt;ExtSw P0, Logical 08&amp;gt; PHY_ID &amp;lt;0x20000000:0x00: On-chip 1G GPHY&amp;gt; Cfg: ANG.1G; Down 
[*03/17/2025 16:51:46.1310] eth2: Down &amp;lt;2C:F8:9B:1C:DD:01&amp;gt; &amp;lt;ExtSw P1, Logical 09&amp;gt; PHY_ID &amp;lt;0x20000001:0x01: On-chip 1G GPHY&amp;gt; Cfg: ANG.1G; Down 
[*03/17/2025 16:51:46.1310] eth3: Down &amp;lt;2C:F8:9B:1C:DD:02&amp;gt; &amp;lt;ExtSw P2, Logical 10&amp;gt; PHY_ID &amp;lt;0x20000002:0x02: On-chip 1G GPHY&amp;gt; Cfg: ANG.1G; Down 
[*03/17/2025 16:51:46.1310] eth4: Down &amp;lt;2C:F8:9B:1C:DD:03&amp;gt; &amp;lt;ExtSw P3, Logical 11&amp;gt; PHY_ID &amp;lt;0x20000003:0x03: On-chip 1G GPHY&amp;gt; Cfg: ANG.1G; Down 
[*03/17/2025 16:51:46.1310] eth5: Down &amp;lt;2C:F8:9B:1C:DD:04&amp;gt; &amp;lt;ExtSw P5, Logical 13&amp;gt; PHY_ID &amp;lt;0x06100006:0x06: On-chip 2.5G SERDES&amp;gt; Cfg: ANG.2.5G; Down 
[*03/17/2025 16:51:46.1310]                                                      PHY_ID &amp;lt;0x0388001c:0x1c:External Cascaded 10G EXT3&amp;gt; Cfg: ANG.2.5G; Down 
[*03/17/2025 16:51:46.6320] bcm_enet_init:L2672 ENET system contructed and configured enet-kthrd thread
[*03/17/2025 16:51:46.6320] enet_kthread_handler:L326 Instantiating ENET thread
[*03/17/2025 16:51:46.6320] Load bcm_pcie_hcd.ko
[*03/17/2025 16:51:46.6320] PCIe HCD (impl1)
[*03/17/2025 16:51:46.6320]   bcm963xx-pcie: found core [1] vcore [0] 
[*03/17/2025 16:51:46.6320]   bcm963xx-pcie: [0] DT node available: /pcie@85000000
[*03/17/2025 16:51:46.6320]   bcm963xx-pcie: vcore [0] initialized with [2] devices
[*03/17/2025 16:51:46.6320]   bcm963xx-pcie: [0] DT node available: /pcie@80040000
[*03/17/2025 16:51:46.6320]   bcm963xx-pcie: found port [0] GEN2 Core Rev [3.23] with 2 Lanes
[*03/17/2025 16:51:47.7200]   bcm963xx-pcie: Core [0] setting resistor calibration value to 0x9
[*03/17/2025 16:51:49.2350]   bcm963xx-pcie: core [0] link is DOWN
[*03/17/2025 16:51:49.2450]   bcm963xx-pcie: core [0] powered down
[*03/17/2025 16:51:49.2730] Load pwrmngtd.ko
[*03/17/2025 16:51:49.3670] Broadcom Packet Flow Cache HW acceleration &amp;lt;DISABLED&amp;gt;
[*03/17/2025 16:51:49.3710] Broadcom Packet Flow Cache learning via BLOG disabled.
[*03/17/2025 16:51:49.3740] 
[*03/17/2025 16:51:49.3740] Broadcom Packet Flow Cache flushing the flows
[*03/17/2025 16:51:49.6130]     Auto-Negotiation: Enabled
[*03/17/2025 16:51:49.6130]     PHY Capabilities: 1GFD|1GHD|100MFD|100MHD|10MFD|10MHD
[*03/17/2025 16:51:49.6130]     Link is Down.
[*03/17/2025 16:51:49.7610] wired0    Link encap:Ethernet  HWaddr 68:7D:B4:1C:C1:C0  
[*03/17/2025 16:51:49.7610]           UP BROADCAST MULTICAST  MTU:2044  Metric:1
[*03/17/2025 16:51:49.7610]           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[*03/17/2025 16:51:49.7610]           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[*03/17/2025 16:51:49.7610]           collisions:0 txqueuelen:1000 
[*03/17/2025 16:51:49.7610]           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
[*03/17/2025 16:51:49.7610] 
[*03/17/2025 16:51:49.7670] 68:7D:B4:1C:C1:C0
[*03/17/2025 16:51:49.7670] BCM11ax AP: MIC Certificate Present
[*01/12/2021 23:59:59.0220] Last reload time: Mar 17 16:51:28 2025
[*03/17/2025 16:51:28.0000] Setting system time Mon Mar 17 16:51:28 UTC 2025
[*03/17/2025 16:51:28.6000] Last reload reason : 0: unknown
[  OK  ] Started Cisco S10 boot service.
         Starting Cisco nss service...
         Starting Cisco nolan service...
         Starting Cisco watchdog...
[  OK  ] Started Cisco nss service.
[  OK  ] Started Cisco nolan service.
[  OK  ] Started Cisco watchdog.
         Starting Cisco nolan USB service...
         Starting Cisco S15platform...
         Starting Cisco Kclick...
[  OK  ] Started Cisco nolan USB service.
[  OK  ] Started Cisco pre-PoE negotiation.
         Starting Cisco pre-PoE negotiation...
[*03/17/2025 16:51:34.5730] Loading HND Module
[03/17/2025 16:51:34.6690] Archer WFD Binding Successfull
[  OK  ] Started Cisco S15platform.
[  OK  ] Started Cisco Kclick.
         Starting Cisco ME service...
         Starting Cisco certificate create service...
         Starting Cisco sysctl service...
         Starting Cisco Sku service...
         Starting Cisco Kclick...
[  OK  ] Started Cisco sysctl service.
[  OK  ] Started Cisco Sku service.
[*03/17/2025 16:51:34.7310] Wifi Forwarding Driver is initialized!
[*03/17/2025 16:51:34.7790] igs_module_init:867:         IGS 18 create network socket successful
[*03/17/2025 16:51:35.6530] NTKM - ntkm_init                      - Nitro KM loaded
[*03/17/2025 16:51:39.0500] Starting check if backup WiFi NVRAM are available
[*03/17/2025 16:51:39.0500] WiFi backup nvram - crc = 1338875760
[*03/17/2025 16:51:39.0500] WiFi active nvram - crc =434
[*03/17/2025 16:51:39.0500] [WARNING]ACTIVE and BACKUP NVRAM NOT use same data
[*03/17/2025 16:51:39.0500] WiFi NVRAM CRC=1338875760
[*03/17/2025 16:51:39.0500] WiFi MAJOR Version=1
[*03/17/2025 16:51:39.0500] WiFi MINOR Version=0
[*03/17/2025 16:51:39.0500] Size of WiFi NVRAM=433
[*03/17/2025 16:51:39.0500] sb/0/aa2g="0x3"
[*03/17/2025 16:51:39.0500] sb/0/aa5g="0x3"
[*03/17/2025 16:51:39.0500] sb/0/aga0="0x43"
[*03/17/2025 16:51:39.0500] sb/0/aga1="0x43"
[*03/17/2025 16:51:39.0500] sb/0/agbg0="0x83"
[*03/17/2025 16:51:39.0500] sb/0/agbg1="0x83"
[*03/17/2025 16:51:39.0500] sb/0/AvVmid_c0="3,110,4,100,4,100,4,100,4,100,4,100"
[*03/17/2025 16:51:39.0500] sb/0/AvVmid_c1="3,110,4,100,4,100,4,100,4,100,4,100"
[*03/17/2025 16:51:39.0500] sb/0/boardflags="0x10000000"
[*03/17/2025 16:51:39.0500] sb/0/boardflags2="0x40000004"
[*03/17/2025 16:51:39.0500] sb/0/boardflags3="0x40000000"
[*03/17/2025 16:51:39.0500] sb/0/boardflags4="0x30008"
[*03/17/2025 16:51:39.0500] sb/0/boardrev="0x1203"
[*03/17/2025 16:51:39.0500] sb/0/boardtype="0x08cf"
[*03/17/2025 16:51:39.0500] sb/0/cckbw202gpo="0x0000"
[*03/17/2025 16:51:39.0500] sb/0/cckbw20ul2gpo="0x0000"
[*03/17/2025 16:51:39.0500] sb/0/ccode="ALL"
[*03/17/2025 16:51:39.0500] sb/0/dacdiv10_2g="1"
[*03/17/2025 16:51:39.0500] sb/0/devid="0xF6CA"
[*03/17/2025 16:51:39.0500] sb/0/dot11agduphrlrpox="0"
[*03/17/2025 16:51:39.0500] sb/0/dot11agduphrpo="0"
[*03/17/2025 16:51:39.0500] sb/0/dot11agduplrpo="0"
[*03/17/2025 16:51:39.0500] sb/0/dot11agofdmhrbw202gpo="0x0000"
[*03/17/2025 16:51:39.0500] sb/0/epacal2g="1"
[*03/17/2025 16:51:39.0500] sb/0/epacal5g="0"
[*03/17/2025 16:51:39.0500] sb/0/epagain2g="2"
[*03/17/2025 16:51:39.0500] sb/0/epagain5g="0"
[*03/17/2025 16:51:39.0500] sb/0/low_adc_rate_en="1"
[*03/17/2025 16:51:39.0500] sb/0/macaddr="68:7D:B4:1E:33:40"
[*03/17/2025 16:51:39.0500] sb/0/maxp2ga0="74"
[*03/17/2025 16:51:39.0500] sb/0/maxp2ga1="74"
[*03/17/2025 16:51:39.0500] sb/0/maxp5gb0a0="74"
[*03/17/2025 16:51:39.0500] sb/0/maxp5gb0a1="74"
[*03/17/2025 16:51:39.0500] sb/0/maxp5gb1a0="74"
[*03/17/2025 16:51:39.0500] sb/0/maxp5gb1a1="74"
[*03/17/2025 16:51:39.0500] sb/0/maxp5gb2a0="74"
[*03/17/2025 16:51:39.0500] sb/0/maxp5gb2a1="74"
[*03/17/2025 16:51:39.0500] sb/0/maxp5gb3a0="74"
[*03/17/2025 16:51:39.0500] sb/0/maxp5gb3a1="74"
[*03/17/2025 16:51:39.0500] sb/0/maxp5gb4a0="74"
[*03/17/2025 16:51:39.0500] sb/0/maxp5gb4a1="74"
[*03/17/2025 16:51:39.0500] sb/0/mcs1024qam2gpo="0x0000"
[*03/17/2025 16:51:39.0500] sb/0/mcs1024qam5ghpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcs1024qam5glpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcs1024qam5gmpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcs1024qam5gx1po="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcs1024qam5gx2po="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcs10poexp="0"
[*03/17/2025 16:51:39.0500] sb/0/mcs11poexp="0"
[*03/17/2025 16:51:39.0500] sb/0/mcs8poexp="0"
[*03/17/2025 16:51:39.0500] sb/0/mcs9poexp="0"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw1605ghpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw1605glpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw1605gmpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw1605gx1po="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw1605gx2po="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw202gpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw205ghpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw205glpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw205gmpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw205gx1po="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw205gx2po="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw402gpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw405ghpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw405glpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw405gmpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw405gx1po="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw405gx2po="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw805ghpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw805glpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw805gmpo="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw805gx1po="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcsbw805gx2po="0x00000000"
[*03/17/2025 16:51:39.0500] sb/0/mcslr5ghpo="0x0000"
[*03/17/2025 16:51:39.0500] sb/0/mcslr5glpo="0x0000"
[*03/17/2025 16:51:39.0500] sb/0/mcslr5gmpo="0x0000"
[*03/17/2025 16:51:39.0500] sb/0/mcslr5gx1po="0x0000"
[*03/17/2025 16:51:39.0500] sb/0/mcslr5gx2po="0x0000"
[*03/17/2025 16:51:39.0500] sb/0/measpower="0"
[*03/17/2025 16:51:39.0500] sb/0/measpower1="0"
[*03/17/2025 16:51:39.0500] sb/0/measpower2="0"
[*03/17/2025 16:51:39.0500] sb/0/nb_bbmult="0x5740"
[*03/17/2025 16:51:39.0500] sb/0/nb_papdcalidx="0x0a1a"
[*03/17/2025 16:51:39.0500] sb/0/nb_rxattn="0x0303"
[*03/17/2025 16:51:39.0500] sb/0/nb_tia_gain_mode="0x0504"
[*03/17/2025 16:51:39.0500] sb/0/nb_txattn="0x0303"
[*03/17/2025 16:51:39.0500] sb/0/noiselvl2ga0="31"
[*03/17/2025 16:51:39.0500] sb/0/noiselvl2ga1="31"
[*03/17/2025 16:51:39.0500] sb/0/noiselvl5ga0="31,31,31,31"
[*03/17/2025 16:51:39.0500] sb/0/noiselvl5ga1="31,31,31,31"
[*03/17/2025 16:51:39.0500] sb/0/NVRAMRev="775336"
[*03/17/2025 16:51:39.0500] sb/0/ofdmlrbw202gpo="0x0000"
[*03/17/2025 16:51:39.0500] sb/0/olpc_2g_th="10"
[*03/17/2025 16:51:39.0500] sb/0/olpc_5g_th="10"
[*03/17/2025 16:51:39.0500] sb/0/pa2g20ccka0="0x1ab5,0xe08e,0x0,0x5201"
[*03/17/2025 16:51:39.0500] sb/0/pa2g20ccka1="0x1a65,0xe77d,0xfb8d,0x2fe6"
[*03/17/2025 16:51:39.0500] sb/0/pa2g40a0="0x1e02,0xd74c,0x0000,0x3ab3"
[*03/17/2025 16:51:39.0500] sb/0/pa2g40a1="0x1df4,0xd851,0x0000,0x3e30"
[*03/17/2025 16:51:39.0500] sb/0/pa2ga0="0x1a35,0xe08e,0x0,0x5201"
[*03/17/2025 16:51:39.0500] sb/0/pa2ga1="0x19dc,0xe77d,0xfb8d,0x2fe6"
[*03/17/2025 16:51:39.0500] sb/0/pa5g40a0="0x23ea,0xbdd3,0x0,0x119f,0x235d,0xc165,0xfef8,0x11a6,0x2390,0xc01f,0x0,0x123e,0x232e,0xc1c7,0x0,0x15d5,0x2338,0xc124,0x0,0x1158"
[*03/17/2025 16:51:39.0500] sb/0/pa5g40a1="0x2378,0xbcce,0x0,0x15cc,0x23be,0xbca5,0x0,0x10b3,0x22a9,0xc389,0xfe54,0x132c,0x22fe,0xc005,0x0,0x1512,0x2268,0xc115,0x0,0x17d5"
[*03/17/2025 16:51:39.0500] sb/0/pa5g80a0="0x2299,0xc01f,0xfffe,0x106c,0x22eb,0xc0ae,0x0,0x10b8,0x2241,0xc32f,0x0,0x1314,0x21d6,0xc43e,0xffa7,0x124d,0x21f3,0xc401,0x0,0x136e"
[*03/17/2025 16:51:39.0500] sb/0/pa5g80a1="0x2224,0xc00a,0xff55,0x1068,0x21f2,0xc03e,0x0,0x13d3,0x21c6,0xc349,0xff1b,0x101a,0x21d3,0xc240,0x0,0x15d5,0x20bf,0xc72c,0xfdfe,0x106d"
[*03/17/2025 16:51:39.0500] sb/0/pa5ga0="0x2114,0xc3bf,0xfffc,0x12ed,0x2137,0xc500,0xfffe,0x150a,0x2182,0xc42f,0x0,0xecd,0x2127,0xc57b,0x0,0xf07,0x212e,0xc51f,0x0,0xe02"
[*03/17/2025 16:51:39.0500] sb/0/pa5ga1="0x20f3,0xc232,0xffc2,0xfd4,0x20f0,0xc2d8,0xfffc,0x14b1,0x2118,0xc34d,0x0,0xf72,0x20dd,0xc414,0x0,0xf88,0x2093,0xc478,0x0,0xfdf"
[*03/17/2025 16:51:39.0500] sb/0/pacalshift2g="-1,-1"
[*03/17/2025 16:51:39.0500] sb/0/papdcap2g="0"
[*03/17/2025 16:51:39.0500] sb/0/papdcap5g="0"
[*03/17/2025 16:51:39.0500] sb/0/paprdis="1"
[*03/17/2025 16:51:39.0500] sb/0/pdgain2g="1"
[*03/17/2025 16:51:39.0500] sb/0/pdgain5g="0"
[*03/17/2025 16:51:39.0500] sb/0/pdoffset20in40m2g="0"
[*03/17/2025 16:51:39.0500] sb/0/pdoffset20in40m5gb0="0"
[*03/17/2025 16:51:39.0500] sb/0/pdoffset20in40m5gb1="0"
[*03/17/2025 16:51:39.0500] sb/0/pdoffset20in40m5gb4="0"
[*03/17/2025 16:51:39.0500] sb/0/pdoffset20in80m5gb0="0"
[*03/17/2025 16:51:39.0620] sb/0/pdoffset20in80m5gb1="0"
[*03/17/2025 16:51:39.0620] sb/0/pdoffset20in80m5gb4="0"
[*03/17/2025 16:51:39.0620] sb/0/pdoffset40in80m5gb0="0"
[*03/17/2025 16:51:39.0620] sb/0/pdoffset40in80m5gb1="0"
[*03/17/2025 16:51:39.0620] sb/0/pdoffset40in80m5gb4="0"
[*03/17/2025 16:51:39.0620] sb/0/pdoffsetcck="0"
[*03/17/2025 16:51:39.0620] sb/0/pdoffsetcck20m="0"
[*03/17/2025 16:51:39.0620] sb/0/phycal_tempdelta="40"
[*03/17/2025 16:51:39.0620] sb/0/rawtempsense="0x1ff"
[*03/17/2025 16:51:39.0620] sb/0/regrev="0"
[*03/17/2025 16:51:39.0620] sb/0/rpcal2g="0xfc"
[*03/17/2025 16:51:39.0620] sb/0/rpcal5gb0="0"
[*03/17/2025 16:51:39.0620] sb/0/rpcal5gb1="0"
[*03/17/2025 16:51:39.0620] sb/0/rpcal5gb2="0"
[*03/17/2025 16:51:39.0620] sb/0/rpcal5gb3="0"
[*03/17/2025 16:51:39.0620] sb/0/rpcal5gb4="0"
[*03/17/2025 16:51:39.0620] sb/0/rssicorrnorm5g_c0="0,0,0,0,0,0,0,0,0,0,0,0"
[*03/17/2025 16:51:39.0620] sb/0/rssicorrnorm5g_c1="0,0,0,0,0,0,0,0,0,0,0,0"
[*03/17/2025 16:51:39.0620] sb/0/rxchain="0x3"
[*03/17/2025 16:51:39.0620] sb/0/rxgainerr2ga0="0"
[*03/17/2025 16:51:39.0620] sb/0/rxgainerr2ga1="0"
[*03/17/2025 16:51:39.0620] sb/0/rxgainerr5ga0="63,63,63,63"
[*03/17/2025 16:51:39.0620] sb/0/rxgainerr5ga1="31,31,31,31"
[*03/17/2025 16:51:39.0620] sb/0/rxgains2gelnagaina0="5"
[*03/17/2025 16:51:39.0620] sb/0/rxgains2gelnagaina1="5"
[*03/17/2025 16:51:39.0620] sb/0/rxgains2gtrelnabypa0="1"
[*03/17/2025 16:51:39.0620] sb/0/rxgains2gtrelnabypa1="1"
[*03/17/2025 16:51:39.0620] sb/0/rxgains2gtrisoa0="9"
[*03/17/2025 16:51:39.0620] sb/0/rxgains2gtrisoa1="9"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5gelnagaina0="3"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5gelnagaina1="3"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5ghelnagaina0="3"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5ghelnagaina1="3"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5ghtrelnabypa0="1"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5ghtrelnabypa1="1"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5ghtrisoa0="8"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5ghtrisoa1="8"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5gmelnagaina0="3"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5gmelnagaina1="3"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5gmtrelnabypa0="1"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5gmtrelnabypa1="1"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5gmtrisoa0="8"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5gmtrisoa1="8"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5gtrelnabypa0="1"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5gtrelnabypa1="1"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5gtrisoa0="8"
[*03/17/2025 16:51:39.0620] sb/0/rxgains5gtrisoa1="8"
[*03/17/2025 16:51:39.0620] sb/0/sb20in40hrlrpox="0"
[*03/17/2025 16:51:39.0620] sb/0/sb20in40hrpo="0"
[*03/17/2025 16:51:39.0620] sb/0/sb20in40lrpo="0"
[*03/17/2025 16:51:39.0620] sb/0/sb20in80and160hr5ghpo="0"
[*03/17/2025 16:51:39.0620] sb/0/sb20in80and160hr5glpo="0"
[*03/17/2025 16:51:39.0620] sb/0/sb20in80and160hr5gmpo="0"
[*03/17/2025 16:51:39.0620] sb/0/sb20in80and160hr5gx1po="0"
[*03/17/2025 16:51:39.0620] sb/0/sb20in80and160hr5gx2po="0"
[*03/17/2025 16:51:39.0620] sb/0/sb20in80and160lr5ghpo="0"
[*03/17/2025 16:51:39.0620] sb/0/sb20in80and160lr5glpo="0"
[*03/17/2025 16:51:39.0620] sb/0/sb20in80and160lr5gmpo="0"
[*03/17/2025 16:51:39.0620] sb/0/sb20in80and160lr5gx1po="0"
[*03/17/2025 16:51:39.0620] sb/0/sb20in80and160lr5gx2po="0"
[*03/17/2025 16:51:39.0620] sb/0/sb40and80hr5ghpo="0"
[*03/17/2025 16:51:39.0620] sb/0/sb40and80hr5glpo="0"
[*03/17/2025 16:51:39.0620] sb/0/sb40and80hr5gmpo="0"
[*03/17/2025 16:51:39.0620] sb/0/sb40and80hr5gx1po="0"
[*03/17/2025 16:51:39.0620] sb/0/sb40and80hr5gx2po="0"
[*03/17/2025 16:51:39.0620] sb/0/sb40and80lr5ghpo="0"
[*03/17/2025 16:51:39.0620] sb/0/sb40and80lr5glpo="0"
[*03/17/2025 16:51:39.0620] sb/0/sb40and80lr5gmpo="0"
[*03/17/2025 16:51:39.0620] sb/0/sb40and80lr5gx1po="0"
[*03/17/2025 16:51:39.0620] sb/0/sb40and80lr5gx2po="0"
[*03/17/2025 16:51:39.0620] sb/0/spurcan_CoreMask="2"
[*03/17/2025 16:51:39.0620] sb/0/sromrev="18"
[*03/17/2025 16:51:39.0620] sb/0/subband5gver="0x5"
[*03/17/2025 16:51:39.0620] sb/0/subvid="0x106b"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_cfg="0x7"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_misc2g_fem3to0="0x00"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_misc2g_fem7to4="0x00"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_misc5g_fem3to0="0000"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_misc5g_fem7to4="0x00"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_RX2g_fem3to0="0x00"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_RX2g_fem7to4="0x22"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_RX5g_fem3to0="0x44"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_RX5g_fem7to4="0x00"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_RXByp2g_fem3to0="0x00"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_RXByp2g_fem7to4="0x33"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_RXByp5g_fem3to0="0x66"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_RXByp5g_fem7to4="0x00"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_TX2g_fem3to0="0x88"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_TX2g_fem7to4="0x11"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_TX5g_fem3to0="0x33"
[*03/17/2025 16:51:39.0620] sb/0/swctrlmap4_TX5g_fem7to4="0x00"
[*03/17/2025 16:51:39.0620] sb/0/tempcorrx="0x3f"
[*03/17/2025 16:51:39.0620] sb/0/tempoffset="255"
[*03/17/2025 16:51:39.0620] sb/0/tempsense_option="0x3"
[*03/17/2025 16:51:39.0620] sb/0/tempsense_slope="0xff"
[*03/17/2025 16:51:39.0620] sb/0/temps_hysteresis="5"
[*03/17/2025 16:51:39.0620] sb/0/tempthresh="110"
[*03/17/2025 16:51:39.0620] sb/0/tssiposslope2g="1"
[*03/17/2025 16:51:39.0620] sb/0/tssiposslope5g="1"
[*03/17/2025 16:51:39.0620] sb/0/tworangetssi2g="0"
[*03/17/2025 16:51:39.0620] sb/0/tworangetssi5g="0"
[*03/17/2025 16:51:39.0620] sb/0/txchain="0x3"
[*03/17/2025 16:51:39.0620] sb/0/vendid="0x14e4"
[*03/17/2025 16:51:39.0620] sb/0/xtalfreq="50000"
[*03/17/2025 16:51:39.0620] sb/1/aa2g="0x3"
[*03/17/2025 16:51:39.0620] sb/1/aa5g="0x3"
[*03/17/2025 16:51:39.0620] sb/1/aga0="0x43"
[*03/17/2025 16:51:39.0620] sb/1/aga1="0x43"
[*03/17/2025 16:51:39.0620] sb/1/agbg0="0x83"
[*03/17/2025 16:51:39.0620] sb/1/agbg1="0x83"
[*03/17/2025 16:51:39.0620] sb/1/AvVmid_c0="4,120,4,100,4,100,4,100,4,100,4,100"
[*03/17/2025 16:51:39.0620] sb/1/AvVmid_c1="4,120,4,100,4,100,4,100,4,100,4,100"
[*03/17/2025 16:51:39.0620] sb/1/boardflags="0x10000000"
[*03/17/2025 16:51:39.0620] sb/1/boardflags2="0x4"
[*03/17/2025 16:51:39.0620] sb/1/boardflags3="0x40000000"
[*03/17/2025 16:51:39.0620] sb/1/boardflags4="0x20008"
[*03/17/2025 16:51:39.0620] sb/1/boardrev="0x1203"
[*03/17/2025 16:51:39.0620] sb/1/boardtype="0x08cf"
[*03/17/2025 16:51:39.0620] sb/1/cckbw202gpo="0x0000"
[*03/17/2025 16:51:39.0620] sb/1/cckbw20ul2gpo="0x0000"
[*03/17/2025 16:51:39.0620] sb/1/ccode="ALL"
[*03/17/2025 16:51:39.0620] sb/1/devid="0x4492"
[*03/17/2025 16:51:39.0620] sb/1/dot11agduphrlrpox="0"
[*03/17/2025 16:51:39.0620] sb/1/dot11agduphrpo="0"
[*03/17/2025 16:51:39.0620] sb/1/dot11agduplrpo="0"
[*03/17/2025 16:51:39.0620] sb/1/dot11agofdmhrbw202gpo="0x0000"
[*03/17/2025 16:51:39.0620] sb/1/epacal2g="0"
[*03/17/2025 16:51:39.0620] sb/1/epacal5g="0"
[*03/17/2025 16:51:39.0620] sb/1/epagain2g="0"
[*03/17/2025 16:51:39.0620] sb/1/epagain5g="0"
[*03/17/2025 16:51:39.0620] sb/1/low_adc_rate_en="1"
[*03/17/2025 16:51:39.0620] sb/1/macaddr="68:7D:B4:1E:33:50"
[*03/17/2025 16:51:39.0620] sb/1/maxp2ga0="74"
[*03/17/2025 16:51:39.0620] sb/1/maxp2ga1="74"
[*03/17/2025 16:51:39.0620] sb/1/maxp5gb0a0="74"
[*03/17/2025 16:51:39.0620] sb/1/maxp5gb0a1="74"
[*03/17/2025 16:51:39.0620] sb/1/maxp5gb1a0="74"
[*03/17/2025 16:51:39.0620] sb/1/maxp5gb1a1="74"
[*03/17/2025 16:51:39.0620] sb/1/maxp5gb2a0="74"
[*03/17/2025 16:51:39.0620] sb/1/maxp5gb2a1="74"
[*03/17/2025 16:51:39.0620] sb/1/maxp5gb3a0="74"
[*03/17/2025 16:51:39.0620] sb/1/maxp5gb3a1="74"
[*03/17/2025 16:51:39.0620] sb/1/maxp5gb4a0="74"
[*03/17/2025 16:51:39.0620] sb/1/maxp5gb4a1="74"
[*03/17/2025 16:51:39.0620] sb/1/mcs1024qam2gpo="0x0000"
[*03/17/2025 16:51:39.0620] sb/1/mcs1024qam5ghpo="0x00000000"
[*03/17/2025 16:51:39.0620] sb/1/mcs1024qam5glpo="0x00000000"
[*03/17/2025 16:51:39.0620] sb/1/mcs1024qam5gmpo="0x00000000"
[*03/17/2025 16:51:39.0620] sb/1/mcs1024qam5gx1po="0x00000000"
[*03/17/2025 16:51:39.0620] sb/1/mcs1024qam5gx2po="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcs10poexp="0"
[*03/17/2025 16:51:39.0720] sb/1/mcs11poexp="0"
[*03/17/2025 16:51:39.0720] sb/1/mcs8poexp="0"
[*03/17/2025 16:51:39.0720] sb/1/mcs9poexp="0"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw1605ghpo="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw1605glpo="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw1605gmpo="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw1605gx1po="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw1605gx2po="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw202gpo="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw205ghpo="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw205glpo="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw205gmpo="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw205gx1po="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw205gx2po="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw402gpo="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw405ghpo="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw405glpo="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw405gmpo="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw405gx1po="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw405gx2po="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw805ghpo="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw805glpo="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw805gmpo="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw805gx1po="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcsbw805gx2po="0x00000000"
[*03/17/2025 16:51:39.0720] sb/1/mcslr5ghpo="0x0000"
[*03/17/2025 16:51:39.0720] sb/1/mcslr5glpo="0x0000"
[*03/17/2025 16:51:39.0720] sb/1/mcslr5gmpo="0x0000"
[*03/17/2025 16:51:39.0720] sb/1/mcslr5gx1po="0x0000"
[*03/17/2025 16:51:39.0720] sb/1/mcslr5gx2po="0x0000"
[*03/17/2025 16:51:39.0720] sb/1/measpower="0"
[*03/17/2025 16:51:39.0720] sb/1/measpower1="0"
[*03/17/2025 16:51:39.0720] sb/1/measpower2="0"
[*03/17/2025 16:51:39.0720] sb/1/noiselvl2ga0="31"
[*03/17/2025 16:51:39.0720] sb/1/noiselvl2ga1="31"
[*03/17/2025 16:51:39.0720] sb/1/noiselvl5ga0="31,31,31,31"
[*03/17/2025 16:51:39.0720] sb/1/noiselvl5ga1="31,31,31,31"
[*03/17/2025 16:51:39.0720] sb/1/NVRAMRev="775336"
[*03/17/2025 16:51:39.0720] sb/1/ofdmlrbw202gpo="0x0000"
[*03/17/2025 16:51:39.0720] sb/1/olpc_5g_th="10"
[*03/17/2025 16:51:39.0720] sb/1/pa2g20ccka0="0x251f,0xc82c,0xfcbd,0x1875"
[*03/17/2025 16:51:39.0720] sb/1/pa2g20ccka1="0x2396,0xc65c,0x0000,0x256c"
[*03/17/2025 16:51:39.0720] sb/1/pa2g40a0="0x1f49,0xe74b,0xf2cb,0x16ae"
[*03/17/2025 16:51:39.0720] sb/1/pa2g40a1="0x1e8d,0xe995,0xf1bf,0x14c2"
[*03/17/2025 16:51:39.0720] sb/1/pa2ga0="0x2051,0xd5c3,0xfb5a,0x1a6a"
[*03/17/2025 16:51:39.0720] sb/1/pa2ga1="0x204f,0xd332,0xfc37,0x196b"
[*03/17/2025 16:51:39.0720] sb/1/pa5g40a0="0x1b94,0xf037,0xea90,0x0,0x1fb0,0xd9de,0xf2eb,0x0,0x1e3c,0xe171,0xf0ac,0x0,0x2035,0xcaca,0xfff8,0x6000,0x21bb,0xcacb,0xfa81,0x0"
[*03/17/2025 16:51:39.0720] sb/1/pa5g40a1="0x21fd,0xc8d5,0xfc01,0x20fe,0x1d2a,0xecc0,0xebab,0x0,0x2390,0xc197,0xfd5c,0x0,0x2127,0xc7ac,0xff2c,0x3ac2,0x2219,0xc1fd,0xffff,0x18b2"
[*03/17/2025 16:51:39.0720] sb/1/pa5g80a0="0x22f0,0xbd88,0xffff,0xce2,0x2357,0xbd1d,0xffff,0x1720,0x1a6c,0xf5b7,0xe910,0x0,0x2302,0xbd72,0x0,0x0,0x22ba,0xc3be,0xfd89,0x0"
[*03/17/2025 16:51:39.0720] sb/1/pa5g80a1="0x230b,0xbe14,0x0,0xf7f,0x23b2,0xbe14,0x0,0x11dc,0x2292,0xc205,0xfdfb,0x0,0x1e16,0xd92f,0xf55b,0x0,0x1ec3,0xd797,0xf62b,0x0"
[*03/17/2025 16:51:39.0720] sb/1/pa5ga0="0x20a7,0xc420,0xffff,0x2f9b,0x2109,0xc46a,0xffff,0x258e,0x1b98,0xe8ad,0xef7c,0x0,0x1c2d,0xe0ef,0xf393,0x0,0x1d37,0xe040,0xf355,0x0"
[*03/17/2025 16:51:39.0720] sb/1/pa5ga1="0x1bda,0xe88e,0xeee8,0x0,0x2364,0xbdb7,0x0,0x5b8,0x2110,0xc3fb,0xffff,0x10a8,0x2017,0xc670,0x0,0x2878,0x1edb,0xcf1b,0xfb78,0x0"
[*03/17/2025 16:51:39.0720] sb/1/papdcap2g="0"
[*03/17/2025 16:51:39.0720] sb/1/papdcap5g="0"
[*03/17/2025 16:51:39.0720] sb/1/paprdis="1"
[*03/17/2025 16:51:39.0720] sb/1/pdgain2g="0"
[*03/17/2025 16:51:39.0720] sb/1/pdgain5g="0"
[*03/17/2025 16:51:39.0720] sb/1/pdoffset20in40m2g="0"
[*03/17/2025 16:51:39.0720] sb/1/pdoffset20in40m5gb0="0"
[*03/17/2025 16:51:39.0720] sb/1/pdoffset20in40m5gb1="0"
[*03/17/2025 16:51:39.0720] sb/1/pdoffset20in40m5gb4="0"
[*03/17/2025 16:51:39.0720] sb/1/pdoffset20in80m5gb0="0"
[*03/17/2025 16:51:39.0720] sb/1/pdoffset20in80m5gb1="0"
[*03/17/2025 16:51:39.0720] sb/1/pdoffset20in80m5gb4="0"
[*03/17/2025 16:51:39.0720] sb/1/pdoffset40in80m5gb0="0"
[*03/17/2025 16:51:39.0720] sb/1/pdoffset40in80m5gb1="0"
[*03/17/2025 16:51:39.0720] sb/1/pdoffset40in80m5gb4="0"
[*03/17/2025 16:51:39.0720] sb/1/pdoffsetcck="0"
[*03/17/2025 16:51:39.0720] sb/1/pdoffsetcck20m="0"
[*03/17/2025 16:51:39.0720] sb/1/phycal_tempdelta="40"
[*03/17/2025 16:51:39.0720] sb/1/rawtempsense="0x1ff"
[*03/17/2025 16:51:39.0720] sb/1/regrev="0"
[*03/17/2025 16:51:39.0720] sb/1/rpcal2g="0"
[*03/17/2025 16:51:39.0720] sb/1/rpcal5gb0="0xb7"
[*03/17/2025 16:51:39.0720] sb/1/rpcal5gb1="0xb8"
[*03/17/2025 16:51:39.0720] sb/1/rpcal5gb2="0xd2"
[*03/17/2025 16:51:39.0720] sb/1/rpcal5gb3="0xf7"
[*03/17/2025 16:51:39.0720] sb/1/rpcal5gb4="0"
[*03/17/2025 16:51:39.0720] sb/1/rssicorrnorm5g_c0="0,0,0,0,0,0,0,0,0,0,0,0"
[*03/17/2025 16:51:39.0720] sb/1/rssicorrnorm5g_c1="0,0,0,0,0,0,0,0,0,0,0,0"
[*03/17/2025 16:51:39.0720] sb/1/rxchain="0x3"
[*03/17/2025 16:51:39.0720] sb/1/rxgainerr2ga0="63"
[*03/17/2025 16:51:39.0720] sb/1/rxgainerr2ga1="31"
[*03/17/2025 16:51:39.0730] sb/1/rxgainerr5ga0="0,0,0,0"
[*03/17/2025 16:51:39.0730] sb/1/rxgainerr5ga1="0,2,0,-2"
[*03/17/2025 16:51:39.0730] sb/1/rxgains2gelnagaina0="5"
[*03/17/2025 16:51:39.0730] sb/1/rxgains2gelnagaina1="5"
[*03/17/2025 16:51:39.0730] sb/1/rxgains2gtrelnabypa0="1"
[*03/17/2025 16:51:39.0730] sb/1/rxgains2gtrelnabypa1="1"
[*03/17/2025 16:51:39.0730] sb/1/rxgains2gtrisoa0="9"
[*03/17/2025 16:51:39.0730] sb/1/rxgains2gtrisoa1="9"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5gelnagaina0="3"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5gelnagaina1="3"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5ghelnagaina0="3"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5ghelnagaina1="3"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5ghtrelnabypa0="1"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5ghtrelnabypa1="1"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5ghtrisoa0="7"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5ghtrisoa1="7"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5gmelnagaina0="3"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5gmelnagaina1="3"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5gmtrelnabypa0="1"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5gmtrelnabypa1="1"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5gmtrisoa0="7"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5gmtrisoa1="7"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5gtrelnabypa0="1"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5gtrelnabypa1="1"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5gtrisoa0="8"
[*03/17/2025 16:51:39.0730] sb/1/rxgains5gtrisoa1="8"
[*03/17/2025 16:51:39.0730] sb/1/sb20in40hrlrpox="0"
[*03/17/2025 16:51:39.0730] sb/1/sb20in40hrpo="0"
[*03/17/2025 16:51:39.0730] sb/1/sb20in40lrpo="0"
[*03/17/2025 16:51:39.0730] sb/1/sb20in80and160hr5ghpo="0"
[*03/17/2025 16:51:39.0730] sb/1/sb20in80and160hr5glpo="0"
[*03/17/2025 16:51:39.0730] sb/1/sb20in80and160hr5gmpo="0"
[*03/17/2025 16:51:39.0730] sb/1/sb20in80and160hr5gx1po="0"
[*03/17/2025 16:51:39.0730] sb/1/sb20in80and160hr5gx2po="0"
[*03/17/2025 16:51:39.0730] sb/1/sb20in80and160lr5ghpo="0"
[*03/17/2025 16:51:39.0730] sb/1/sb20in80and160lr5glpo="0"
[*03/17/2025 16:51:39.0760] sb/1/sb20in80and160lr5gmpo="0"
[*03/17/2025 16:51:39.0760] sb/1/sb20in80and160lr5gx1po="0"
[*03/17/2025 16:51:39.0760] sb/1/sb20in80and160lr5gx2po="0"
[*03/17/2025 16:51:39.0760] sb/1/sb40and80hr5ghpo="0"
[*03/17/2025 16:51:39.0760] sb/1/sb40and80hr5glpo="0"
[*03/17/2025 16:51:39.0760] sb/1/sb40and80hr5gmpo="0"
[*03/17/2025 16:51:39.0760] sb/1/sb40and80hr5gx1po="0"
[*03/17/2025 16:51:39.0760] sb/1/sb40and80hr5gx2po="0"
[*03/17/2025 16:51:39.0760] sb/1/sb40and80lr5ghpo="0"
[*03/17/2025 16:51:39.0760] sb/1/sb40and80lr5glpo="0"
[*03/17/2025 16:51:39.0760] sb/1/sb40and80lr5gmpo="0"
[*03/17/2025 16:51:39.0760] sb/1/sb40and80lr5gx1po="0"
[*03/17/2025 16:51:39.0760] sb/1/sb40and80lr5gx2po="0"
[*03/17/2025 16:51:39.0760] sb/1/sromrev="18"
[*03/17/2025 16:51:39.0760] sb/1/subband5gver="0x5"
[*03/17/2025 16:51:39.0760] sb/1/subvid="0x106b"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_cfg="0x7"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_misc2g_fem3to0="0x00"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_misc2g_fem7to4="0x00"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_misc5g_fem3to0="0000"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_misc5g_fem7to4="0x00"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_RX2g_fem3to0="0x00"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_RX2g_fem7to4="0x22"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_RX5g_fem3to0="0x44"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_RX5g_fem7to4="0x00"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_RXByp2g_fem3to0="0x00"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_RXByp2g_fem7to4="0x33"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_RXByp5g_fem3to0="0x66"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_RXByp5g_fem7to4="0x00"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_TX2g_fem3to0="0x88"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_TX2g_fem7to4="0x11"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_TX5g_fem3to0="0x33"
[*03/17/2025 16:51:39.0760] sb/1/swctrlmap4_TX5g_fem7to4="0x00"
[*03/17/2025 16:51:39.0760] sb/1/tempcorrx="0x3f"
[*03/17/2025 16:51:39.0760] sb/1/tempoffset="255"
[*03/17/2025 16:51:39.0760] sb/1/tempsense_option="0x3"
[*03/17/2025 16:51:39.0760] sb/1/tempsense_slope="0xff"
[*03/17/2025 16:51:39.0760] sb/1/temps_hysteresis="5"
[*03/17/2025 16:51:39.0760] sb/1/tempthresh="110"
[*03/17/2025 16:51:39.0760] sb/1/tssiposslope2g="1"
[*03/17/2025 16:51:39.0760] sb/1/tssiposslope5g="1"
[*03/17/2025 16:51:39.0760] sb/1/tworangetssi2g="0"
[*03/17/2025 16:51:39.0760] sb/1/tworangetssi5g="0"
[*03/17/2025 16:51:39.0760] sb/1/txchain="0x3"
[*03/17/2025 16:51:39.0760] sb/1/vendid="0x14e4"
[*03/17/2025 16:51:39.0760] sb/1/xtalfreq="50000"
[*03/17/2025 16:51:39.2510] restore done!
[*03/17/2025 16:51:39.3270] restore done!
[*03/17/2025 16:51:43.0270] crypto worker thread started
[*03/17/2025 16:51:43.0310] crypto worker thread started
[*03/17/2025 16:51:43.1060] Broadcom EAP Forwarder v0.1 is loaded
[*03/17/2025 16:51:45.0910] 
[*03/17/2025 16:51:45.0910] Click sched monitor: schedulers = 1
[*03/17/2025 16:51:58.4930] wl_module_init: passivemode set to 0x1
[*03/17/2025 16:51:58.4930] wl_module_init: txworkq set to 0x0
[*03/17/2025 16:51:58.4940] wl_pktfwd_sys_init:  WL_PKTFWD[1.1.0] Success
[*03/17/2025 16:51:58.5020] si_doattach: using BAR0 value: enum_base=86000000
[*03/17/2025 16:51:58.5070] BME Service Initialization
[*03/17/2025 16:51:58.5080] BME: M2M Core id 0x844 rev 128
[*03/17/2025 16:51:58.5090] wl0: phy_radio_attach: RF Band Cap: 2G:1 5G:1
[*03/17/2025 16:51:58.5310] BME:register key&amp;lt;1010804&amp;gt; user RLM sel IDX set 1 mem 4 8 hi 0 0
[*03/17/2025 16:51:58.5320] wl0 taf_do_enable: TAF is enabled
[*03/17/2025 16:51:58.5340] 
[*03/17/2025 16:51:58.5340]  WLC_ATTACH routine completed successfully
[*03/17/2025 16:51:58.5340] wfd0-thrd WL 0 FLowControl total&amp;lt;59918&amp;gt; lo&amp;lt;14979&amp;gt; hi&amp;lt;5991&amp;gt; favor prio&amp;lt;4&amp;gt;
[*03/17/2025 16:51:58.5380] wfd_bind: wfd0-thrd initialized pktlists: radio 0 nodes 4104 xfer wl_pktfwd_xfer_callback+0x0/0x244 [wl]
[*03/17/2025 16:51:58.5380] 
[*03/17/2025 16:51:58.5380] Create Archer WFQ Queue: wfd_idx 0, qid 0, qsize 1024
[*03/17/2025 16:51:58.5380] Create Archer WFQ Queue: wfd_idx 0, qid 1, qsize 1024
[*03/17/2025 16:51:58.5380]  wfd_bind: Dev apr1v0 wfd_idx 0 wl_radio_idx 0 Type skb:sll configured WFD thread wfd0-thrd minQId/maxQId (0/1), status (0) qmask 0x3
[*03/17/2025 16:51:58.5380] Instantiating WFD 0 thread
[*03/17/2025 16:51:58.5380] wl_wfd_bind: wl0 wfd_idx 0 success
[*03/17/2025 16:51:58.5420]  eap_dev_g: initialized pktlists: radio 0 nodes 4104 xfer wl_pktfwd_xfer_callback+0x0/0x244 [wl] 
[*03/17/2025 16:51:58.5420] 0 FlowControl total&amp;lt;59918&amp;gt; lo&amp;lt;14979&amp;gt; hi&amp;lt;5991&amp;gt;[  OK  ] Started Cisco ME service.
[  OK  ] Started Cisco certificate create service.
[  OK  ] Started Cisco Kclick.
         Starting rsyslog client...
         Starting Cisco S16platfomm...
         Starting Cisco syslog service...
[  OK  ] Started Tam server.
         Starting Tam server...
         Starting Cisco Tam service...
         Starting Cisco certtime service...
[*03/17/2025 16:52:12.8140] pid 3227's current affinity mask: 0
[*03/17/2025 16:52:12.8140] pid 3227's new affinity mask: 0
[*03/17/2025 16:52:12.8260] pid 3226's current affinity mask: 0
[*03/17/2025 16:52:12.8260] pid 3226's new affinity mask: 0
[*03/17/2025 16:52:13.0170] Success.
[*03/17/2025 16:52:13.0270] archerctl: Set yield budget to 128 
[  OK  ] Started rsyslog client.
[  OK  ] Started Cisco syslog service.
[  OK  ] Started Cisco Tam service.
         Starting Cisco synclogd...
[  OK  ] Started Cisco synclogd.
[  OK  ] Started Cisco S16platfomm.
[03/17/2025 16:52:19.7420] wired0: sysport_tm port shaper set to 999000 kbps (phy speed 1000000 kbps)
[03/17/2025 16:52:19.8500] eth4: sysport_tm port shaper set to 999000 kbps (phy speed 1000000 kbps)
[03/17/2025 16:52:19.9830] eth5: sysport_tm port shaper set to 99900 kbps (phy speed 100000 kbps)
[  *** ] A start job is running for Cisco certtime service (1min 46s / 3min 8s)[*03/17/2025 16:52:15.1540] PHY register set successfully
[*03/17/2025 16:52:15.1540] mii register 0x001e4191 is 0x0001
[*03/17/2025 16:52:15.1540] 
[*03/17/2025 16:52:15.1580] PHY register set successfully
[*03/17/2025 16:52:15.1580] mii register 0x00010000 is 0x8000
[*03/17/2025 16:52:15.1580] 
[*03/17/2025 16:52:16.1680] PHY register set successfully
[*03/17/2025 16:52:16.1680] mii register 0x001e4039 is 0x001b
[*03/17/2025 16:52:16.1680] 
[*03/17/2025 16:52:16.1720] PHY register set successfully
[*03/17/2025 16:52:16.1720] mii register 0x001e4005 is 0x0001
[*03/17/2025 16:52:16.1720] 
[*03/17/2025 16:52:19.8490] wired0 (Int switch port: 0) (Logical Port: 0) (phyId: &lt;span class="lia-unicode-emoji" title=":smiling_face_with_sunglasses:"&gt;😎&lt;/span&gt; Link Up at 1000 mbps full duplex
[*03/17/2025 16:52:19.9570] eth4 (Ext switch port: 3) (Logical Port: 11) (phyId: 3) Link Up at 1000 mbps full duplex
[*03/17/2025 16:52:20.0870] eth5 (Ext switch port: 5) (Logical Port: 13) (phyId: 1c) Link Up at 100 mbps full duplex
[*03/17/2025 16:52:20.0930] Force speed to 100 phy_add=0x1c 
[*03/17/2025 16:52:50.7660] starting tam services using ACT2...
[*03/17/2025 16:52:50.7660] Object list for Device=ap-tam App[1] Count= 0
[*03/17/2025 16:52:50.7660] 
[*03/17/2025 16:52:50.7660] TAMS init: There is no Cloud ID in ACT2!
[*03/17/2025 16:52:50.7660] TAM init done
[  OK  ] Started Cisco certtime service.
[  OK  ] Reached target System Initialization.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Basic System.
         Starting Cisco rtd service...
[  OK  ] Started System Monitor service.
         Starting System Monitor service...
[  OK  ] Started Serial Getty on ttyS0.
         Starting Serial Getty on ttyS0...
[  OK  ] Reached target Login Prompts.
         Starting Cisco klogd...
[  OK  ] Started NTP_PROC daemon.
         Starting NTP_PROC daemon...
         Starting Cisco kexec...
         Starting Security Auditing Service...
         Starting Cisco image/firmware updater service...
         Starting AP Trace daemon...
         Starting Clean Air daemon...
         Starting Fast CGI daemon...
         Starting Cisco led service...
         Starting Hostapd process...
         Starting Cisco brain service...
         Starting capwapd...
         Starting BLE init service...
         Starting RSYNC User Key Generation...
         Starting Cisco printkd...
         Starting WCPD process...
[  OK  ] Started Cisco klogd.
[  OK  ] Started Cisco kexec.
[  OK  ] Started Cisco image/firmware updater service.
[  OK  ] Started Cisco led service.
[  OK  ] Started BLE init service.
[  OK  ] Started Cisco printkd.
         Starting ntp file watcher...
[  OK  ] Started AP Trace daemon.
[*03/17/2025 16:52:54.1110] No valid NTP source
[*03/17/2025 16:52:54.1110] No valid ntp server info file. Stop NTP!
[  OK  ] Started Cisco rtd service.
[  OK  ] Started Fast CGI daemon.
[  OK  ] Started Hostapd process.
[*03/17/2025 16:52:54.5120] hostapd:Hostapd: DCDS not init cloud=0 webauth=255 255 init=0
[*03/17/2025 16:52:54.5120] 
[  OK  ] Started ntp file watcher.
[  OK  ] Started Cisco brain service.
[  OK  ] Started Cisco Power Daemon.
         Starting Cisco Power Daemon...
         Starting ntp watcher...
[  OK  ] Started ntp watcher.
         Starting dnsmasq watcher...
         Starting DNSmasq...
[  OK  ] Started DNSmasq.
[  OK  ] Started dnsmasq watcher.
[*03/17/2025 16:52:56.1720] wired0 (Int switch port: 0) (Logical Port: 0) (phyId: &lt;span class="lia-unicode-emoji" title=":smiling_face_with_sunglasses:"&gt;😎&lt;/span&gt; Link DOWN.
[*03/17/2025 16:52:56.8950] click-config/io-real.click:396: While configuring 'todev_wired0 :: ToDevice':
[*03/17/2025 16:52:56.8950]   warning: device 'wired0' is down
[*03/17/2025 16:52:56.9630] click-config/io-real.click:396: While configuring 'fromdev_wired0 :: FromWiredSwNssDevice':
[*03/17/2025 16:52:56.9630]   warning: device 'wired0' is down
[*03/17/2025 16:52:57.1760] eth4 (Ext switch port: 3) (Logical Port: 11) (phyId: 3) Link DOWN.
[*03/17/2025 16:52:57.4950] click-config/io-real.click:396: While initializing 'tohost_wired0 :: ToHost':
[*03/17/2025 16:52:57.4960]   warning: device 'wired0' is down
[*03/17/2025 16:52:57.5460] chatter: Device wired0 notify up link DOWN
[*03/17/2025 10:52:58.3130] ip6_port srcr2, ip6local ::, ip6 ::, plen 0, gw6 ::, gw6_mac 00:00:00:00:00:00, mtu 1500, vid 0, mode6 2(slaac)

[*03/17/2025 10:53:00.2500] pid 5708's current affinity mask: 0
[*03/17/2025 10:53:00.2500] pid 5708's new affinity mask: 0
[*03/17/2025 10:53:00.9950] chpasswd: password for user changed


User Access Verification
Username: [03/17/2025 10:53:01.1840] wired0: sysport_tm port shaper set to 999000 kbps (phy speed 1000000 kbps)
[*03/17/2025 10:53:01.2910] wire[03/17/2025 10:53:01.2920] eth4: sysport_tm port shaper set to 999000 kbps (phy speed 1000000 kbps)
d0 (Int switch port: 0) (Logical Port: 0) (phyId: &lt;span class="lia-unicode-emoji" title=":smiling_face_with_sunglasses:"&gt;😎&lt;/span&gt; Link Up at 1000 mbps full duplex
[*03/17/2025 10:53:01.2920] chatter: Device wired0 notify state change link UP
[*03/17/2025 10:53:01.4310] eth4 (Ext switch port: 3) (Logical Port: 11) (phyId: 3) Link Up at 1000 mbps full duplex
[*03/17/2025 10:53:01.5840] #### board_data_init: num_slots (3), num_radios (2)
[*03/17/2025 10:53:01.6930] DOT11_TXP[0]:Domain configured: 41 class:B
[*03/17/2025 10:53:02.1730] DOT11_TXP[0]:Regdb file: /radio_fw/C9105AXW_power_table_mapping.txt
[*03/17/2025 10:53:02.1770] DOT11_TXP[0]:Domain configured: 0 class:A
[*03/17/2025 10:53:02.1910] USB Device Disconnected from the AP
[*03/17/2025 10:53:02.2990] DOT11_TXP[0]:Regdb file: /radio_fw/C9105AXW_power_table_mapping.txt
[*03/17/2025 10:53:02.3290] DOT11_TXP[1]:Domain configured: 41 class:B
[*03/17/2025 10:53:02.8390] DOT11_TXP[1]:Regdb file: /radio_fw/C9105AXW_power_table_mapping.txt
[*03/17/2025 10:53:03.2860] ip6_port srcr2, ip6local fe80::ec3a:2b45:88d8:6cf1, ip6 ::, plen 0, gw6 ::, gw6_mac 00:00:00:00:00:00, mtu 1500, vid 0, mode6 2(slaac)
[*03/17/2025 10:53:03.3940] DOT11_DRV[0]: BCM FIPS POST for CCMP-128 and GCMP-128 passed
[*03/17/2025 10:53:03.3940] DOT11_DRV[0]: Stop Radio0
[*03/17/2025 10:53:03.3950] Stopped Radio 0
[*03/17/2025 10:53:03.4490] US (US/0) UNITED STATES
[*03/17/2025 10:53:03.4670] DOT11_DRV[0]: set_channel Channel set to 6/20
[*03/17/2025 10:53:05.2030] wl: Not In Range
[*03/17/2025 10:53:05.2930] DOT11_DRV[1]: BCM FIPS POST for CCMP-128 and GCMP-128 passed
[*03/17/2025 10:53:05.2930] DOT11_DRV[1]: Stop Radio1
[*03/17/2025 10:53:05.2940] Stopped Radio 1
[*03/17/2025 10:53:05.3350] US (US/0) UNITED STATES
[*03/17/2025 10:53:05.3480] DOT11_DRV[1]: set_channel Channel set to 36/20
[*03/17/2025 10:53:06.7620] DOT11_DRV[2]: off_channel timeout but no req in progress
[*03/17/2025 10:53:06.8170] chatter: Device wired2 notify down link DOWN
[*03/17/2025 10:53:06.8290] chatter: Device wired2 notify down link DOWN
[*03/17/2025 10:53:06.8330] chatter: Device wired3 notify down link DOWN
[*03/17/2025 10:53:06.8450] chatter: Device wired3 notify down link DOWN
[*03/17/2025 10:53:07.8530] wl: Unsupported
[*03/17/2025 10:53:09.0720] size: 13083 bytes (52453 left)
[*03/17/2025 10:53:09.4960] ethernet_port wired0, ip 10.96.36.213, netmask 255.255.248.0, gw 10.96.32.1, mtu 1500, bcast 10.96.39.255, dns1 10.99.32.30, domain neo.edu, vid 0, static_ip_failover false, dhcp_vlan_failover false
[*03/17/2025 10:53:09.5470] DOT11_DRV[0]: set_channel Channel set to 1/20
[*03/17/2025 10:53:09.8210] wl: Unsupported
[*03/17/2025 10:53:11.7200] DOT11_DRV[0]: set_channel Channel set to 1/20
[*03/17/2025 10:53:13.5380] DOT11_DRV[0]: set_channel Channel set to 1/20
[*03/17/2025 10:53:14.0870] DOT11_DRV[0]: set_channel Channel set to 1/20
[*03/17/2025 10:53:14.2390] Air-IQ configured with radios:
[*03/17/2025 10:53:14.2390] 2.4GHZ: apr0v0
[*03/17/2025 10:53:14.2390]   5GHZ: apr1v0 
[*03/17/2025 10:53:14.2390] Error: BsaConnect: device not started. id: 0
[*03/17/2025 10:53:14.2390] Error: AicsMain:  Couldn't connect to device!  Waiting 1 sec. . .
[*03/17/2025 10:53:15.2400] Error: BsaConnect: device not started. id: 0
[*03/17/2025 10:53:15.2400] Error: AicsMain:  Couldn't connect to device!  Waiting 1 sec. . .
[*03/17/2025 10:53:16.2410] Error: BsaConnect: device not started. id: 0
[*03/17/2025 10:53:16.2410] Error: AicsMain:  Couldn't connect to device!  Waiting 1 sec. . .
[*03/17/2025 10:53:16.6610] DOT11_DRV[0]: set_channel Channel set to 1/20
[*03/17/2025 10:53:17.2180] Error: BsaConnect: device not started. id: 0
[*03/17/2025 10:53:17.2420] Error: BsaConnect: device not started. id: 0
[*03/17/2025 10:53:17.2420] Error: AicsMain:  Couldn't connect to device!  Waiting 1 sec. . .
[*03/17/2025 10:53:17.3810] Check whether client_ip_table entry need to be cleared 0
[*03/17/2025 10:53:17.3820] Clearing client entry
[*03/17/2025 10:53:17.5940] /etc/dnsmasq.host.conf:
[*03/17/2025 10:53:17.6000] no-resolv
[*03/17/2025 10:53:17.6000] pid-file=/var/run/dnsmasq.host.pid
[*03/17/2025 10:53:17.6000] port=53
[*03/17/2025 10:53:17.6000] min-port=61000
[*03/17/2025 10:53:17.6000] server=10.99.32.30
[*03/17/2025 10:53:17.6000] domain=neo.edu
[*03/17/2025 10:53:17.6000] bind-interfaces
[*03/17/2025 10:53:17.6000] interface=lo
[*03/17/2025 10:53:17.9070] /etc/dnsmasq.host.conf:
[*03/17/2025 10:53:17.9120] no-resolv
[*03/17/2025 10:53:17.9120] pid-file=/var/run/dnsmasq.host.pid
[*03/17/2025 10:53:17.9120] port=53
[*03/17/2025 10:53:17.9120] min-port=61000
[*03/17/2025 10:53:17.9120] server=10.99.32.30
[*03/17/2025 10:53:17.9120] domain=neo.edu
[*03/17/2025 10:53:17.9120] bind-interfaces
[*03/17/2025 10:53:17.9120] interface=lo
[*03/17/2025 10:53:18.2360] systemd[1]: cleanair.service failed.
[*03/17/2025 10:53:18.2460] Waiting for sending msg to wcp/Radio0.config - 1
[*03/17/2025 10:53:18.2460] 
[*03/17/2025 10:53:18.9350] wl: Unsupported
[*03/17/2025 10:53:19.3840] AP IPv4 Address updated from 0.0.0.0 to 10.96.36.213
[*03/17/2025 10:53:20.1000] size: 13083 bytes (52453 left)
[*03/17/2025 10:53:20.4060] ipv6 gw config loop in set IPv4 addr task
[*03/17/2025 10:53:20.5460] DOT11_DRV[0]: set_channel Channel set to 1/20
[*03/17/2025 10:53:22.4080] ipv6 gw config loop in set IPv4 addr task
[*03/17/2025 10:53:22.7800] DOT11_DRV[0]: set_channel Channel set to 1/20
[*03/17/2025 10:53:24.4100] ipv6 gw config loop in set IPv4 addr task
[*03/17/2025 10:53:24.9560] DOT11_DRV[0]: set_channel Channel set to 1/20
[*03/17/2025 10:53:25.5060] DOT11_DRV[0]: set_channel Channel set to 1/20
[*03/17/2025 10:53:26.4120] ipv6 gw config loop in set IPv4 addr task
[*03/17/2025 10:53:27.6620] DOT11_DRV[0]: set_channel Channel set to 1/20
[*03/17/2025 10:53:28.4140] ipv6 gw config loop in set IPv4 addr task
[*03/17/2025 10:53:29.1220] wl: Unsupported
[*03/17/2025 10:53:29.2590] Waiting for sending msg to wcp/Radio1.config - 1
[*03/17/2025 10:53:29.2590] 
[*03/17/2025 10:53:30.2760] size: 13083 bytes (52453 left)
[*03/17/2025 10:53:30.7700] wl: Bad Channel
[*03/17/2025 10:53:30.7710] DOT11_DRV[1]: set_channel Channel set to 36/40
[*03/17/2025 10:53:31.0020] wl: Unsupported
[*03/17/2025 10:53:32.7810] DOT11_DRV[1]: set_channel Channel set to 36/40
[*03/17/2025 10:53:35.1440] DOT11_DRV[1]: set_channel Channel set to 36/40
[*03/17/2025 10:53:37.2320] DOT11_DRV[1]: set_channel Channel set to 36/40
[*03/17/2025 10:53:37.5540] DOT11_DRV[1]: set_channel Channel set to 36/40
[*03/17/2025 10:53:40.2740] Waiting for sending msg to wcp/RlanIntf.config - 1
[*03/17/2025 10:53:40.2740] 
[*03/17/2025 10:53:41.0900] DOT11_DRV[1]: set_channel Channel set to 36/40
[*03/17/2025 10:53:42.9860] wl: Unsupported
[*03/17/2025 10:53:44.1050] size: 13083 bytes (52453 left)
[*03/17/2025 10:53:44.6120] DOT11_DRV[1]: set_channel Channel set to 36/40
[*03/17/2025 10:53:47.1050] DOT11_DRV[1]: set_channel Channel set to 36/40
[*03/17/2025 10:53:50.0260] DOT11_DRV[1]: set_channel Channel set to 36/40
[*03/17/2025 10:53:52.4570] DOT11_DRV[1]: set_channel Channel set to 36/40
[*03/17/2025 10:53:53.1160] Waiting for sending msg to ble_config.bleconfig - 1
[*03/17/2025 10:53:53.1160] 
[*03/17/2025 10:53:53.2460] DOT11_DRV[1]: set_channel Channel set to 36/40
[*03/17/2025 10:53:56.3410] DOT11_DRV[1]: set_channel Channel set to 36/40
[*03/17/2025 10:53:57.2530] Failed to send msg to wcp/mesh_userspace/capwap.set_ap_I_domain
[*03/17/2025 10:53:57.2530] 
[*03/17/2025 10:53:58.2790] ipv6 gw config loop in capwap main
[*03/17/2025 10:53:58.6980] Air-IQ configured with radios:
[*03/17/2025 10:53:58.6980] 2.4GHZ: apr0v0
[*03/17/2025 10:53:58.6980]   5GHZ: apr1v0 
[*03/17/2025 10:53:58.6980] Error: BsaConnect: device not started. id: 0
[*03/17/2025 10:53:58.6980] Error: AicsMain:  Couldn't connect to device!  Waiting 1 sec. . .
[*03/17/2025 10:53:59.7000] Error: BsaConnect: device not started. id: 0
[*03/17/2025 10:53:59.7000] Error: AicsMain:  Couldn't connect to device!  Waiting 1 sec. . .
[*03/17/2025 10:54:00.2830] ipv6 gw config loop in capwap main
[*03/17/2025 10:54:00.7020] Error: BsaConnect: device not started. id: 0
[*03/17/2025 10:54:00.7020] Error: AicsMain:  Couldn't connect to device!  Waiting 1 sec. . .
[*03/17/2025 10:54:01.6820] Error: BsaConnect: device not started. id: 0
[*03/17/2025 10:54:01.6940] systemd[1]: cleanair.service failed.
[*03/17/2025 10:54:02.2870] ipv6 gw config loop in capwap main
[*03/17/2025 10:54:04.2910] ipv6 gw config loop in capwap main
[*03/17/2025 10:54:06.2950] ipv6 gw config loop in capwap main
[*03/17/2025 10:54:06.3520] SYS-COND: Allowing LAN ports
[*03/17/2025 10:54:06.3520] AP is in good condition, BLE is off
[*03/17/2025 10:54:08.0500] dtls_init: Use SUDI certificate
[*03/17/2025 10:54:08.1640] 
[*03/17/2025 10:54:08.1640] CAPWAP State: Init
[*03/17/2025 10:54:08.1670] 
[*03/17/2025 10:54:08.1670] PNP is not required, 
[*03/17/2025 10:54:08.1670] Starting CAPWAP discovery
[*03/17/2025 10:54:08.1670] 
[*03/17/2025 10:54:08.1870] 
[*03/17/2025 10:54:08.1870] CAPWAP State: Discovery
[*03/17/2025 10:54:08.2150] IP DNS query for CISCO-CAPWAP-CONTROLLER.neo.edu
[*03/17/2025 10:54:08.2270] DNS resolved CISCO-CAPWAP-CONTROLLER.neo.edu
[*03/17/2025 10:54:08.2270] DNS discover IP addr: 10.96.32.4
[*03/17/2025 10:54:08.2340] Discovery Request sent to 10.96.32.4, discovery type STATIC_CONFIG(1)
[*03/17/2025 10:54:08.2420] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*03/17/2025 10:54:08.2560] 
[*03/17/2025 10:54:08.2560] CAPWAP State: Discovery
[*03/17/2025 10:54:08.2600] Discovery Response from 10.96.32.4
[*03/17/2025 10:54:08.2710] Discovery Response from 10.96.32.4
[*03/17/2025 10:54:12.9470] Start: RPC thread 2982247072 created.
[*08/15/2025 09:05:46.0000] Started wait dtls timer (30 sec)
[*08/15/2025 09:05:46.0150] 
[*08/15/2025 09:05:46.0150] CAPWAP State: DTLS Setup
[*08/15/2025 09:05:46.0520] dtls_verify_server_cert: Controller certificate verification successful
[*08/15/2025 09:05:46.8080] sudi99_request_check_and_load: Use HARSA SUDI certificate
[*08/15/2025 09:05:47.5010] 
[*08/15/2025 09:05:47.5010] CAPWAP State: Join
[*08/15/2025 09:05:47.5400] shared_setenv PART_BOOTCNT 0 &amp;amp;&amp;gt; /dev/null
[*08/15/2025 09:05:48.6720] OOBImageDnld: OOB Image Download in ap_cap_bitmask(2)
[*08/15/2025 09:05:48.6720] Sending Join request to 10.96.32.4 through port 5260, packet size 1376
[*08/15/2025 09:05:48.6770] Join Response from 10.96.32.4, packet size 1397
[*08/15/2025 09:05:48.6770] AC accepted previous sent request with result code: 0
[*08/15/2025 09:05:48.6770] Received wlcType 0, timer 30
[*08/15/2025 09:05:48.7940] 
[*08/15/2025 09:05:48.7940] CAPWAP State: Image Data
[*08/15/2025 09:05:48.7960] AP image version 17.9.5.47 backup 17.9.4.202, Controller 17.12.5.41
[*08/15/2025 09:05:48.7960] Version does not match.
[*08/15/2025 09:05:48.7960] Request to close the file..
[*08/15/2025 09:05:48.7960] wtpOpenImgFile: image file closed, dcb-&amp;gt;fd set to -1.
[*08/15/2025 09:05:48.9210] status 'upgrade.sh: Script called with args:[PRECHECK]'
[*08/15/2025 09:05:49.0320] do PRECHECK, part1 is active part
[*08/15/2025 09:05:49.0990] status 'upgrade.sh: Cleanup tmp files ...'
[*08/15/2025 09:05:49.2710] status 'upgrade.sh: /tmp space: OK available 96492, required 50000 '
[*08/15/2025 09:05:49.2720] wtpOpenImgFile: request ap1g8, local /tmp/part.tar
[*08/15/2025 09:05:49.2720] wtpOpenImgFile: open (/tmp/part.tar) image file success
[*08/15/2025 09:05:49.2720] Using fd(43071488) for image writing to file(/tmp/part.tar)
[*08/15/2025 09:05:49.2750] Image Data Request sent to 10.96.32.4, fileName [ap1g8], replicaStatus 1
[*08/15/2025 09:05:49.2770] Image Data Response from 10.96.32.4
[*08/15/2025 09:05:49.2770] AC accepted previous sent request with result code: 0
[*08/15/2025 09:05:49.2850] &amp;lt;Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:05:51.8700] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:05:53.7560] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:06:20.4580] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:06:23.4040] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:06:47.5440] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:06:50.4190] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:06:52.5900] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:07:19.1470] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:07:20.3390] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:07:33.1040] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:07:34.9930] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:07:40.8990] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:07:43.6810] Invalid event 58 &amp;amp; state 10 combination.
[*08/15/2025 09:07:43.6810] SM handler: Failed to process timer message. Event 58, state 10
[*08/15/2025 09:07:43.6810] Failed to handle timer message.
[*08/15/2025 09:07:43.6810] FSM failure while processing message with id: 1
[*08/15/2025 09:07:51.7550] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:08:15.8420] Re-Tx Count=1, Max Re-Tx Value=5, SendSeqNum=6, NumofPendingMsgs=1
[*08/15/2025 09:08:15.8420] 
[*08/15/2025 09:08:21.5030] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:08:26.1060] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:08:40.0330] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:08:51.3890] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:08:55.9520] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:09:23.2550] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:09:32.4970] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:09:52.9790] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:09:56.7710] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:10:22.4350] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:10:22.8530] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:10:30.7900] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:10:33.1040] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:10:34.9930] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:10:52.7340] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:11:02.6260] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:11:22.6050] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:11:29.6660] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:11:52.5070] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:11:58.2050] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:12:10.6910] Image download interrupted for 30 seconds. 
[*08/15/2025 09:12:10.6910] 
[*08/15/2025 09:12:10.6910] Going to restart CAPWAP (reason : image download interrupted.)...
[*08/15/2025 09:12:10.6910] 
[*08/15/2025 09:12:10.6910] Restarting CAPWAP State Machine.
[*08/15/2025 09:12:10.6910] OOBImageDnld: OOBImageDownloadTimer expired for image download..
[*08/15/2025 09:12:10.6910] OOBImageDnld: Do common error handler for OOB image download..
[*08/15/2025 09:12:10.7790] OOBImageDnld: OOBImageDownloadTimer expired for image download..
[*08/15/2025 09:12:10.7790] OOBImageDnld: Do common error handler for OOB image download..
[*08/15/2025 09:12:10.8500] 
[*08/15/2025 09:12:10.8500] CAPWAP State: DTLS Teardown
[*08/15/2025 09:12:10.9160] Terminating image download(0x0): Dtls cleanup, ap1g8
[*08/15/2025 09:12:10.9440] OOBImageDnld: Do common error handler for OOB image download..
[*08/15/2025 09:12:11.1730] status 'upgrade.sh: Script called with args:[CANCEL]'
[*08/15/2025 09:12:11.2840] do CANCEL, part1 is active part
[*08/15/2025 09:12:11.3650] status 'upgrade.sh: Cleanup tmp files ...'
[*08/15/2025 09:12:11.4460] Discarding msg CAPWAP_IMAGE_DATA_REQUEST(type 15) in CAPWAP state: DTLS Teardown(4).
[*08/15/2025 09:12:11.4460] Image Data Request sent to 10.96.32.4, fileName [ap1g8], replicaStatus 0
[*08/15/2025 09:12:11.4460] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: DTLS Teardown(4).
[*08/15/2025 09:12:11.4460] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: DTLS Teardown(4).
[*08/15/2025 09:12:15.6900] OOBImageDnld: OOBImageDownloadTimer expired for image download..
[*08/15/2025 09:12:15.6900] OOBImageDnld: Do common error handler for OOB image download..
[*08/15/2025 09:12:15.7270] Terminating image download(0x0): Dtl session deleted, ap1g8
[*08/15/2025 09:12:15.7470] OOBImageDnld: Do common error handler for OOB image download..
[*08/15/2025 09:12:15.9580] status 'upgrade.sh: Script called with args:[CANCEL]'
[*08/15/2025 09:12:16.0720] do CANCEL, part1 is active part
[*08/15/2025 09:12:16.1470] status 'upgrade.sh: Cleanup tmp files ...'
[*08/15/2025 09:12:16.2180] dtls_queue_first: Nothing to extract!
[*08/15/2025 09:12:16.2180] 
[*08/15/2025 09:12:17.2200] ipv6 gw config loop in Ac discovery
[*08/15/2025 09:12:19.2220] ipv6 gw config loop in Ac discovery
[*08/15/2025 09:12:21.2240] ipv6 gw config loop in Ac discovery
[*08/15/2025 09:12:23.2260] ipv6 gw config loop in Ac discovery
[*08/15/2025 09:12:25.2280] ipv6 gw config loop in Ac discovery
[*08/15/2025 09:12:26.2520] 
[*08/15/2025 09:12:26.2520] CAPWAP State: Discovery
[*08/15/2025 09:12:26.2550] IP DNS query for CISCO-CAPWAP-CONTROLLER.neo.edu
[*08/15/2025 09:12:26.2630] DNS resolved CISCO-CAPWAP-CONTROLLER.neo.edu
[*08/15/2025 09:12:26.2630] DNS discover IP addr: 10.96.32.4
[*08/15/2025 09:12:26.2860] Discovery Request sent to 10.96.32.4, discovery type STATIC_CONFIG(1)
[*08/15/2025 09:12:26.2960] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*08/15/2025 09:12:26.2960] Discovery Response from 10.96.32.4
[*08/15/2025 09:12:26.2980] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Discovery(2).
[*08/15/2025 09:12:26.2980] Discovery Response from 10.96.32.4
[*08/15/2025 09:12:36.0000] Started wait dtls timer (30 sec)
[*08/15/2025 09:12:36.0160] 
[*08/15/2025 09:12:36.0160] CAPWAP State: DTLS Setup
[*08/15/2025 09:12:39.0610] dtls_verify_server_cert: Controller certificate verification successful
[*08/15/2025 09:12:45.7460] 
[*08/15/2025 09:12:45.7460] CAPWAP State: Join
[*08/15/2025 09:12:46.7560] OOBImageDnld: OOB Image Download in ap_cap_bitmask(2)
[*08/15/2025 09:12:46.7560] Sending Join request to 10.96.32.4 through port 5260, packet size 1376
[*08/15/2025 09:12:46.7600] Join Response from 10.96.32.4, packet size 1397
[*08/15/2025 09:12:46.7600] AC accepted previous sent request with result code: 0
[*08/15/2025 09:12:46.7600] Received wlcType 0, timer 30
[*08/15/2025 09:12:46.8100] 
[*08/15/2025 09:12:46.8100] CAPWAP State: Image Data
[*08/15/2025 09:12:46.8110] AP image version 17.9.5.47 backup 17.9.4.202, Controller 17.12.5.41
[*08/15/2025 09:12:46.8120] Version does not match.
[*08/15/2025 09:12:46.8120] Request to close the file..
[*08/15/2025 09:12:46.8120] wtpOpenImgFile: image file closed, dcb-&amp;gt;fd set to -1.
[*08/15/2025 09:12:46.9340] status 'upgrade.sh: Script called with args:[PRECHECK]'
[*08/15/2025 09:12:47.0360] do PRECHECK, part1 is active part
[*08/15/2025 09:12:47.1000] status 'upgrade.sh: Cleanup tmp files ...'
[*08/15/2025 09:12:47.2610] status 'upgrade.sh: /tmp space: OK available 96280, required 50000 '
[*08/15/2025 09:12:47.2610] wtpOpenImgFile: request ap1g8, local /tmp/part.tar
[*08/15/2025 09:12:47.2620] wtpOpenImgFile: open (/tmp/part.tar) image file success
[*08/15/2025 09:12:47.2620] Using fd(43134464) for image writing to file(/tmp/part.tar)
[*08/15/2025 09:12:47.2640] Image Data Request sent to 10.96.32.4, fileName [ap1g8], replicaStatus 1
[*08/15/2025 09:12:47.2660] Image Data Response from 10.96.32.4
[*08/15/2025 09:12:47.2660] AC accepted previous sent request with result code: 0
[*08/15/2025 09:12:52.6140] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:13:16.0910] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:13:22.5800] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:13:27.0640] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:13:33.3270] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:13:35.2150] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:13:58.5390] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:14:05.3350] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:14:22.5330] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:14:41.7050] Invalid event 58 &amp;amp; state 10 combination.
[*08/15/2025 09:14:41.7050] SM handler: Failed to process timer message. Event 58, state 10
[*08/15/2025 09:14:41.7050] Failed to handle timer message.
[*08/15/2025 09:14:41.7050] FSM failure while processing message with id: 1
[*08/15/2025 09:14:52.3450] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:14:54.4710] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:14:57.5380] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:15:20.8950] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:15:22.1150] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:15:51.3330] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:15:53.9760] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:16:18.0770] .Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:16:22.0870] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:16:33.3270] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:16:35.2160] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:16:44.9760] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:16:45.1290] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:16:51.9660] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:17:17.0870] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:17:21.7630] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:17:39.3530] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:17:42.7820] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:17:51.6550] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:18:08.5120] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:18:21.5850] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:18:38.7090] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:18:41.6270] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:18:51.5810] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:19:10.6350] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:19:21.4600] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:19:32.9980] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:19:33.3270] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:19:35.2160] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:19:41.1870] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:19:51.2010] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:20:07.3630] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:20:21.1280] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:20:28.2150] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:20:39.4890] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:20:50.9000] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:21:20.6700] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:21:28.1020] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/15/2025 09:21:34.7140] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).&lt;/PRE&gt;</description>
      <pubDate>Fri, 15 Aug 2025 15:25:16 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321045#M285550</guid>
      <dc:creator>CoachChan</dc:creator>
      <dc:date>2025-08-15T15:25:16Z</dc:date>
    </item>
    <item>
      <title>Re: C9105AXW-B Will Not Download Update | WLC 17.12.5 | C9800-40-K9</title>
      <link>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321052#M285551</link>
      <description>&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp; &amp;nbsp;-&amp;nbsp;&amp;nbsp;&lt;a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/1612173"&gt;@CoachChan&lt;/a&gt;&amp;nbsp; &amp;nbsp;You can troubleshoot the joining process for this AP further with instructions from :&lt;BR /&gt;&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp;&lt;A href="https://logadvisor.cisco.com/logadvisor/wireless/9800/9800APJoin" target="_blank"&gt;https://logadvisor.cisco.com/logadvisor/wireless/9800/9800APJoin&lt;/A&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp; &amp;nbsp; M.&lt;/P&gt;</description>
      <pubDate>Fri, 15 Aug 2025 15:59:56 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321052#M285551</guid>
      <dc:creator>Mark Elsen</dc:creator>
      <dc:date>2025-08-15T15:59:56Z</dc:date>
    </item>
    <item>
      <title>Re: C9105AXW-B Will Not Download Update | WLC 17.12.5 | C9800-40-K9</title>
      <link>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321104#M285553</link>
      <description>&lt;P&gt;Debug capwap client error &amp;lt;&amp;lt;- from AP&lt;/P&gt;</description>
      <pubDate>Fri, 15 Aug 2025 18:21:14 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321104#M285553</guid>
      <dc:creator>MHM Cisco World</dc:creator>
      <dc:date>2025-08-15T18:21:14Z</dc:date>
    </item>
    <item>
      <title>Re: C9105AXW-B Will Not Download Update | WLC 17.12.5 | C9800-40-K9</title>
      <link>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321335#M285561</link>
      <description>&lt;P&gt;&lt;a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/1612173"&gt;@CoachChan&lt;/a&gt;&amp;nbsp;"&lt;SPAN&gt;discarding msg CAPWAP" is completely normal for any CAPWAP configuration messages received while the AP is downloading because CAPWAP config can only be accepted after the AP has rebooted on the new image and is in a CAPWAP registered state so you can ignore those messages.&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN&gt;Have you power cycled and done a factory default reset of the AP?&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN&gt;Have you read and followed the advice in the Field Notice and technotes?&lt;BR /&gt;&lt;A title="Field Notice: FN74109 - Access Point Image Corruption During CAPWAP Upgrade May Result in Boot Failure - Software Upgrade Recommended" href="https://www.cisco.com/c/en/us/support/docs/field-notices/741/fn74109.html" target="_blank" rel="noopener"&gt;Field Notice: FN74109 - Access Point Image Corruption During CAPWAP Upgrade May Result in Boot Failure - Software Upgrade Recommended&lt;/A&gt;&lt;BR /&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN&gt;&lt;A title="Safely Upgrade Access Points, Avoiding Image Corruption That Causes Boot Loop" href="https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/221869-safely-upgrade-access-points-avoiding-i.html" target="_blank" rel="noopener"&gt;Safely Upgrade Access Points, Avoiding Image Corruption That Causes Boot Loop&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN&gt;&lt;A title="Recover from a Boot Loop Caused by Image Corruption on Wave 2 and 11ax Access Points (CSCvx32806)" href="https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/220443-how-to-avoid-boot-loop-due-to-corrupted.html" target="_blank" rel="noopener"&gt;Recover from a Boot Loop Caused by Image Corruption on Wave 2 and 11ax Access Points (CSCvx32806)&lt;/A&gt;&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Sat, 16 Aug 2025 22:48:17 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321335#M285561</guid>
      <dc:creator>Rich R</dc:creator>
      <dc:date>2025-08-16T22:48:17Z</dc:date>
    </item>
    <item>
      <title>Re: C9105AXW-B Will Not Download Update | WLC 17.12.5 | C9800-40-K9</title>
      <link>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321356#M285565</link>
      <description>&lt;BLOCKQUOTE&gt;&lt;HR /&gt;&lt;a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/1612173"&gt;@CoachChan&lt;/a&gt;&amp;nbsp;wrote:&lt;BR /&gt;
&lt;PRE&gt;MTU:2044 &lt;/PRE&gt;
&lt;HR /&gt;&lt;/BLOCKQUOTE&gt;
&lt;P&gt;Set the AP's MTU to 1200.&amp;nbsp;&lt;/P&gt;
&lt;P&gt;And check the AP's flash for&amp;nbsp;CSCwe97901, CSCwm08044, CSCwm72142.&lt;/P&gt;</description>
      <pubDate>Sun, 17 Aug 2025 03:32:59 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321356#M285565</guid>
      <dc:creator>Leo Laohoo</dc:creator>
      <dc:date>2025-08-17T03:32:59Z</dc:date>
    </item>
    <item>
      <title>Re: C9105AXW-B Will Not Download Update | WLC 17.12.5 | C9800-40-K9</title>
      <link>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321372#M285571</link>
      <description>&lt;P&gt;&amp;gt;&amp;nbsp;&lt;SPAN&gt;And check the AP's flash for&amp;nbsp;&lt;/SPAN&gt;&lt;A href="https://quickview.cloudapps.cisco.com/quickview/bug/CSCwe97901" target="_blank" rel="noopener"&gt;CSCwe97901&lt;/A&gt;&lt;SPAN&gt;,&amp;nbsp;&lt;/SPAN&gt;&lt;A href="https://quickview.cloudapps.cisco.com/quickview/bug/CSCwm08044" target="_blank" rel="noopener"&gt;CSCwm08044&lt;/A&gt;&lt;SPAN&gt;,&amp;nbsp;&lt;/SPAN&gt;&lt;A href="https://quickview.cloudapps.cisco.com/quickview/bug/CSCwm72142" target="_blank" rel="noopener"&gt;CSCwm72142&lt;/A&gt;&lt;SPAN&gt;.&lt;/SPAN&gt;&lt;BR /&gt;Which is why I said "&lt;SPAN&gt;Have you power cycled?" - all of those are resolved by power cycling the AP.&lt;/SPAN&gt;&lt;/P&gt;
&lt;P&gt;&lt;SPAN&gt;And how the hell did the MTU get set to 2044?&amp;nbsp; Anyway the factory default reset would set that back to 1500 which is generally fine.&amp;nbsp; Good spot&amp;nbsp;&lt;a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/326026"&gt;@Leo Laohoo&lt;/a&gt;&amp;nbsp;although that may not be the cause of this, still good to fix it.&lt;/SPAN&gt;&lt;/P&gt;</description>
      <pubDate>Sun, 17 Aug 2025 07:31:35 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321372#M285571</guid>
      <dc:creator>Rich R</dc:creator>
      <dc:date>2025-08-17T07:31:35Z</dc:date>
    </item>
    <item>
      <title>Re: C9105AXW-B Will Not Download Update | WLC 17.12.5 | C9800-40-K9</title>
      <link>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321846#M285604</link>
      <description>&lt;P&gt;Recently I see same issue'&amp;nbsp;&lt;/P&gt;
&lt;P&gt;The solution was factory reset? Why? It delete all old image and hence clean memory from big files' then the download start work.&lt;/P&gt;
&lt;P&gt;It can your AP memory full that why it can't accept anymore image.&lt;/P&gt;
&lt;P&gt;MHM&lt;/P&gt;</description>
      <pubDate>Tue, 19 Aug 2025 07:04:22 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321846#M285604</guid>
      <dc:creator>MHM Cisco World</dc:creator>
      <dc:date>2025-08-19T07:04:22Z</dc:date>
    </item>
    <item>
      <title>Re: C9105AXW-B Will Not Download Update | WLC 17.12.5 | C9800-40-K9</title>
      <link>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321862#M285607</link>
      <description>&lt;P&gt;I think you mean flash not memory right&amp;nbsp;&lt;a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/1065752"&gt;@MHM Cisco World&lt;/a&gt;?&amp;nbsp; But yes, that's why I already recommended factory default reset in my previous reply.&amp;nbsp; It also deals with any mis-config/config corruption which could have happened (like incorrect MTU setting somebody has applied).&amp;nbsp; A simple power cycle will clear the /tmp partition which is the problem in those bugs Leo referred to.&lt;/P&gt;</description>
      <pubDate>Tue, 19 Aug 2025 08:28:29 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321862#M285607</guid>
      <dc:creator>Rich R</dc:creator>
      <dc:date>2025-08-19T08:28:29Z</dc:date>
    </item>
    <item>
      <title>Re: C9105AXW-B Will Not Download Update | WLC 17.12.5 | C9800-40-K9</title>
      <link>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321885#M285609</link>
      <description>&lt;P&gt;I think he need factory reset not power cycled' with factory reset it will be so sure that all additional files will clear from memory (flash)' with power cycles he can not be sure about clear files.&lt;/P&gt;
&lt;P&gt;Anyway let wait his reply&amp;nbsp;&lt;/P&gt;
&lt;P&gt;MHM&lt;/P&gt;</description>
      <pubDate>Tue, 19 Aug 2025 08:56:33 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321885#M285609</guid>
      <dc:creator>MHM Cisco World</dc:creator>
      <dc:date>2025-08-19T08:56:33Z</dc:date>
    </item>
    <item>
      <title>Re: C9105AXW-B Will Not Download Update | WLC 17.12.5 | C9800-40-K9</title>
      <link>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321909#M285616</link>
      <description>&lt;P&gt;Yes that's why I said "&lt;SPAN&gt;Have you power cycled &lt;U&gt;&lt;STRONG&gt;and&lt;/STRONG&gt; &lt;/U&gt;done a factory default reset of the AP?"&lt;/SPAN&gt;&lt;/P&gt;</description>
      <pubDate>Tue, 19 Aug 2025 10:08:15 GMT</pubDate>
      <guid>https://community.cisco.com/t5/wireless/c9105axw-b-will-not-download-update-wlc-17-12-5-c9800-40-k9/m-p/5321909#M285616</guid>
      <dc:creator>Rich R</dc:creator>
      <dc:date>2025-08-19T10:08:15Z</dc:date>
    </item>
  </channel>
</rss>

