topic Dynamic flex-connect VLAN from ISE in Wireless

Dynamic flex-connect VLAN from ISE

Wes Schochet — Thu, 23 Oct 2025 17:42:30 GMT

I am doing WLAN / VLAN mapping in flex connect groups. Is there a way I can dynamically set the Flex-Connect VLAN via ISE? Will the same "Airespace-Interface-Name" parameter that I use for local WLANs work?

Re: Dynamic flex-connect VLAN from ISE

balaji.bandi — Thu, 23 Oct 2025 18:20:07 GMT

What WLC controller? Check if this document may help you :

https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/217043-configure-dynamic-vlan-assignment-with-c.html

Re: Dynamic flex-connect VLAN from ISE

Wes Schochet — Thu, 23 Oct 2025 20:48:43 GMT

Unfortunately, I am in a transitional phase where I will have to figure out both AirOS and IOS versions of this. The article looks promising, I'll stop back here and let you know how it goes. Thanks.