topic Take a look at this doc and in Wireless

certificate authen--wireless

Anukalp S — Mon, 05 Jul 2021 07:48:15 GMT

Hi..

I need your help in configuring certificate based authentication between wireless clients and controller. I don't have cisco ACS or Radius sever.

I have CA server that is not running on domain controller & a domain controller. I want when wireless clients get successful through certificate authenticate then wireless query for username & password to the domain controller. Pls help if it possible and how.

Take a look at this doc and

Scott Fella — Fri, 09 May 2014 20:28:54 GMT

Take a look at this doc and see if this helps:

http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/100590-ldap-eapfast-config.html

Please rate helpful post and Cisco Support Community will donate to Kiva

Scotty

Thanks Scott.. but in this

Anukalp S — Sat, 10 May 2014 10:32:11 GMT

Thanks Scott.. but in this doscument domain controller is also a CA server but in my scenario CA is installed on seperate server in metwork.

Also do i need to install Aironet client adaptar & destop utility on client machine or it is not mandatory, if we could configure this on my windows machine wireless settings.

It doesn't matter where you

Scott Fella — Sat, 10 May 2014 15:52:06 GMT

It doesn't matter where you CA is... You just have to setup each piece and give it a try. What your trying to accomplish is not a normal setup. Your better off following best practices for having a PKI infrastructure and also using a radius server. If you don't, then your going have to search for various docs and try to get something working using LDAP.