topic Re: 9124 CAPWAP Failure in Wireless

9124 CAPWAP Failure

jtpntx — Mon, 15 Dec 2025 15:18:58 GMT

Trying to get it to boot to ROMMON. Holding button, release @ 20-30 sec, hit ESC....DOES NOT WORK.

Re: 9124 CAPWAP Failure

Mark Elsen — Mon, 15 Dec 2025 15:29:46 GMT

- @jtpntx Post the boot process , or what's left from it after holding the mode button.
Provide background details of the original issue too and what leads you to the current actions taken

Re: 9124 CAPWAP Failure

jtpntx — Mon, 15 Dec 2025 18:35:35 GMT

The short version

Wait for the button to be released ....
Button pressed for 36 seconds

Setting env for full reset..
Writing to Nand...
Erasing block 0x728000
Erasing at 0x72f000 -- 100% complete.
done
Auto boot mode, use bootipq directly
APPS power cycled and restart reason is 0x10
Hit ESC key to stop autoboot: 0
Specified BOOT: part1
ubi0: attaching mtd2
ubi0: scanning is finished
+-------------------------------+
| part1: 1650 PEBs|
| part2: 2300 PEBs|
+-------------------------------+
ubi0: attached mtd2 (name "mtd=0", size 1024 MiB)
ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
ubi0: good PEBs: 4092, bad PEBs: 4, corrupted PEBs: 0
ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 1717526225
ubi0: available PEBs: 62, total reserved PEBs: 4030, PEBs reserved for bad PEB handling: 76

Booting from part1

Loading file 'part1/part.bin' to addr 0x54000000...

Re: 9124 CAPWAP Failure

Mark Elsen — Mon, 15 Dec 2025 18:47:16 GMT

- @jtpntx I need the full version ,

Re: 9124 CAPWAP Failure

Leo Laohoo — Mon, 15 Dec 2025 20:21:16 GMT

@jtpntx wrote:
Hit ESC key to stop autoboot: 0

This is no ROMMON with Cheetah OS.

Once this part comes up, hit the ESC key within 5 seconds and the AP will drop into u-boot.

Re: 9124 CAPWAP Failure

jtpntx — Tue, 16 Dec 2025 14:14:34 GMT

I think we strayed here.
I have a C9124AXD-B AP that I need to boot Rommon mode in an effort to fix a problem.
Hitting esc while consoled to the AP doesn't seem to work.
Looking for any info specific to this process to verify steps.

Re: 9124 CAPWAP Failure

Mark Elsen — Tue, 16 Dec 2025 15:02:50 GMT

- @jtpntx Describe the problem (first) ; possibly there are other ways to fix it

Re: 9124 CAPWAP Failure

jtpntx — Tue, 16 Dec 2025 15:14:47 GMT

AP flashes green, red amber continuous dispite repeated factory reset.
Instructions to fix this requires ROMMON boot.

Re: 9124 CAPWAP Failure

Mark Elsen — Tue, 16 Dec 2025 15:23:24 GMT

- @jtpntx Instructions are wrong , that only means that the AP is not getting sufficient power ,