topic Changing the Passkey on a 861-W wireless router in Wireless

Changing the Passkey on a 861-W wireless router

apearson1 — Sun, 04 Jul 2021 03:44:52 GMT

Does anyone know how to change the password on a 861-W router. When it was set up cisco did it.

Changing the Passkey on a 861-W wireless router

Stephen Rodriguez — Wed, 14 Sep 2011 14:54:59 GMT

are you looking to change the WPA key?

dot11 ssid < your ssid >

wpa ascii < your new key at least 8 characters >

HTH,

Steve

Re: Changing the Passkey on a 861-W wireless router

apearson1 — Wed, 14 Sep 2011 21:41:06 GMT

is this done through telnet or hyper terminal

and is there a list of commands to go on. The original set up was done by a

cisco tech.

On Wed, Sep 14, 2011 at 10:55 AM, steprodr <

Changing the Passkey on a 861-W wireless router

Stephen Rodriguez — Wed, 14 Sep 2011 21:46:59 GMT

yes, that woudl be done via a telnet/ssh or console session to the AP.

conf t

dot11 ssid < insert your ssid ?

wpa ascii < new key>

end

that should do it.

HTH,

Steve

Re: Changing the Passkey on a 861-W wireless router

apearson1 — Thu, 15 Sep 2011 22:06:34 GMT

Thank you very much I will give it a shot

On Wed, Sep 14, 2011 at 5:47 PM, steprodr <

Re: Changing the Passkey on a 861-W wireless router

apearson1 — Fri, 16 Sep 2011 18:46:46 GMT

I am trying to log on now. Do you know the default Username and Password

On Thu, Sep 15, 2011 at 6:06 PM, Anthony Pearson <

Changing the Passkey on a 861-W wireless router

Stephen Rodriguez — Fri, 16 Sep 2011 19:59:08 GMT

default should be Cisco/Cisco

Re: Changing the Passkey on a 861-W wireless router

apearson1 — Sat, 17 Sep 2011 02:16:16 GMT

Thanks again

On Fri, Sep 16, 2011 at 3:59 PM, steprodr <

Re: Changing the Passkey on a 861-W wireless router

apearson1 — Mon, 19 Sep 2011 15:22:17 GMT

I just logged in.

ap>

I entered

ap> conf t

This was what I received back

% Invalid input detected at '^' marker.

Also for some reason people think that the passkey has to be 26 characters.

Is that true?

On Fri, Sep 16, 2011 at 3:59 PM, steprodr <

Changing the Passkey on a 861-W wireless router

Stephen Rodriguez — Mon, 19 Sep 2011 17:18:49 GMT

you need to enter enable mode first.

ap> enable

shoudl take you to

ap#