https://community.cisco.com/t5/wireless/ai-channel-planning/m-p/5470991#M292502 <P>I was only able to test it in a controlled lab environnement with 2 APs. So my experience is very limited but I will be trying it after we finaly upgrade from MR28.7 next month.</P> Tue, 14 Jan 2025 16:49:30 GMT Raphael_L 2025-01-14T16:49:30Z https://community.cisco.com/t5/wireless/ai-channel-planning/m-p/5470990#M292501 <P>Anyone enabled the AI Channel planning in the Auto RF section, any feedback has this improved endpoints wireless connectivity.</P> Tue, 14 Jan 2025 16:41:53 GMT https://community.cisco.com/t5/wireless/ai-channel-planning/m-p/5470990#M292501 Abdulaziz Loonat 2025-01-14T16:41:53Z https://community.cisco.com/t5/wireless/ai-channel-planning/m-p/5470991#M292502 <P>I was only able to test it in a controlled lab environnement with 2 APs. So my experience is very limited but I will be trying it after we finaly upgrade from MR28.7 next month.</P> Tue, 14 Jan 2025 16:49:30 GMT https://community.cisco.com/t5/wireless/ai-channel-planning/m-p/5470991#M292502 Raphael_L 2025-01-14T16:49:30Z https://community.cisco.com/t5/wireless/ai-channel-planning/m-p/5470992#M292503 <P>Hi <A href="https://community.meraki.com/t5/user/viewprofilepage/user-id/72576">@Abdulaziz Loonat</A> , we have this deployed across a vast amount of sites with no reported issues. I believe it’s a feature that Meraki recommends you enable.</P> Tue, 14 Jan 2025 17:49:24 GMT https://community.cisco.com/t5/wireless/ai-channel-planning/m-p/5470992#M292503 MerakiGnome 2025-01-14T17:49:24Z