topic Re: 2.4 Only in Wireless

2.4 Only

simple818 — Sun, 24 Jun 2018 20:02:22 GMT

I'm trying to troubleshoot some legacy devices. Is there a way to setup an SSID that is 2.4Ghz only? I've been playing with it for a bit and digging into the RF Profiles but I'm not making a ton of progress.

Re: 2.4 Only

Philip D'Ath — Sun, 24 Jun 2018 20:35:34 GMT

I believe if you open a case with support they can enable that as an option. Otherwise no.

Re: 2.4 Only

kevinl2 — Mon, 25 Jun 2018 05:44:58 GMT

What Philip said. My workaround if it's just for testing, is to drop the 5Ghz power to the absolute minimum.

Re: 2.4 Only

simple818 — Mon, 25 Jun 2018 13:08:11 GMT

@Philip D'Ath wrote:
I believe if you open a case with support they can enable that as an option. Otherwise no.

I contacted support and they enabled that option. Thanks for all the feedback. I didn't think about dropping the 5Ghz lower as well.

Re: 2.4 Only

javcasti — Sun, 26 Jul 2020 00:39:58 GMT

So it means it is not available unless you ask for it via a support case?

Re: 2.4 Only

Philip D'Ath — Sun, 26 Jul 2020 19:31:44 GMT

>So it means it is not available unless you ask for it via a support case?

Correct.