topic Re: MAC Authentication - how to dynamically control Bandwidth rate per client? in Wireless

MAC Authentication - how to dynamically control Bandwidth rate per client?

Alexs20 — Thu, 24 Aug 2023 16:16:25 GMT

Hi,

I there any way to control Bandwidth rate dynamically using RADIUS response in "MAC-based access control" mode?

I know how to do that via polices, but i need to control it dynamically, per authentication, something similar to that:

WISPr-Bandwidth-Max-Up := 100000
WISPr-Bandwidth-Max-Down := 100000

Thanks.

aleabrahao — Thu, 24 Aug 2023 16:33:54 GMT

Unfortunately not.

GreenMan — Thu, 24 Aug 2023 20:05:19 GMT

and configure Traffic shaping within the policy

Philip D'Ath — Thu, 24 Aug 2023 21:06:29 GMT

Yes. The attributes to use are:
Maximum-Data-Rate-Upstream

Maximum-Data-Rate-Downstream

You can find all the attributes allowed in this document.

Alexs20 — Fri, 25 Aug 2023 00:37:33 GMT

yeah, looks like this is the only way

Alexs20 — Fri, 25 Aug 2023 00:43:28 GMT

unfortunate it doesn't work with either "MAC-based access control" nor "Identity PSK with RADIUS"

looks like this is only for Sign-on Splash

just tested

Philip D'Ath — Fri, 25 Aug 2023 00:46:27 GMT

Bummer! Then your only choice is group policies.