topic Error Message in Cisco Prime Infrastructure 1.2 in Wireless

Error Message in Cisco Prime Infrastructure 1.2

Dieter Prinesdoma — Sun, 04 Jul 2021 05:45:57 GMT

Hi,

I get an error message if i add an WLC in the Cisco PI.

"Failed feature(s)feature_lldp_neighbors :SNMP request timed out"

The WLC is reachable but the Inventory Collection Status is failed.

Thanks in advance.

Error Message in Cisco Prime Infrastructure 1.2

Scott Fella — Wed, 03 Oct 2012 23:49:28 GMT

Have you tried to play around with using snmp v3 or v2. I get that sometimes and for some reason, one would work and the other wouldn't.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

Error Message in Cisco Prime Infrastructure 1.2

justin_barnes — Fri, 09 Nov 2012 23:14:50 GMT

Im having the exact same issue using v2 as well as v3. I was able to add the controllers early on, but then they dropped with that same error about 4 hrs later.

Re: Error Message in Cisco Prime Infrastructure 1.2

Scott Fella — Sat, 10 Nov 2012 04:12:53 GMT

Your issue is different... your saying that you can add the WLC, but then after a while, its unreachable correct?

Sent from Cisco Technical Support iPad App

Error Message in Cisco Prime Infrastructure 1.2

Shantha Kumar Selvaraj — Sun, 18 Nov 2012 17:56:57 GMT

Hi,

Did you try increasing the snmp timeout to greater value.

Thanks

Error Message in Cisco Prime Infrastructure 1.2

pbelica — Mon, 07 Jan 2013 15:34:44 GMT

Hi everybody,

I`ve got same errors for some devices:

prime collection status:failed feature

I changed snmp timeouts but it not worked..

In inventory log there are many ERROR mesages like:

2012-12-13 15:25:54,507 [ICE Service[ 1]Thread: 6] ERROR inventory - 10.188.200.143 For device id: 10078068 Feature = feature_vlan and Procedure = vlan failed in time 914 with the following error and continuing with other features: com.cisco.nm.expression.function.FunctionException:

any idea?

thank you

Error Message in Cisco Prime Infrastructure 1.2

dahlmanns — Tue, 12 Feb 2013 11:39:10 GMT

Hello,

Just had the same issue and turning off CDP on the local controller fixed it for me.

Controller > CDP > Controller configuration > untag: CDP Protocol Status

Regards,

Ralf.

Error Message in Cisco Prime Infrastructure 1.2

Tim Steele — Sat, 20 Jul 2013 00:22:03 GMT

Thanks for posting Ralf. I was able to disable CDP on the WLC I was having trouble with and it worked for me as well. In my situation, there are three 2504 WLCs: two inside for production and one in the DMZ anchoring guests (running 7.4.100.60 which now allows the 2504 to be an anchor). The two inside WLCs added fine to Prime, but the DMZ WLC gave the error Dieter mentions above. Also, I'm using SNMPv3 on all three WLCs.

Error Message in Cisco Prime Infrastructure 1.2

Ravi Singh — Sun, 21 Jul 2013 02:50:31 GMT

What I think there is problem with your SNMP settings. Please cross check your SNMP configuration setting. And if you are using V2 try V3 also turnoff the CDP protocol as suggested by dahlmanns.

Error Message in Cisco Prime Infrastructure 1.2

Harish Chopra — Wed, 04 Dec 2013 08:55:16 GMT

Hi,

I am also trying to add my Nexus 3k device into CPI 1.3 but getting the following error -

Collection Status : Failed feature(s)feature_lldp_neighbors :Unexpected error. See the log file inventory.log for detail

Can you help me with that. I have already set the snmp community string on N3k.

Error Message in Cisco Prime Infrastructure 1.2

Wei Kwong Ong — Wed, 04 Dec 2013 09:00:45 GMT

Make sure u filled in the correct values for snmp and telnet in PI, and then click Update and Sync.