Cisco MSE CMX PBR

Mohamed Sayed — Mon, 05 Jul 2021 08:48:34 GMT

hi all,

I configured the MSE-CMX Policy Based Routing as the deployment guide as follow:

interface GigabitEthernet0/0
description<Interface towards the Clients>
ip address xx.xx.xx.xx xx.xx.xx.xx
ip policy route-map pbr
!
interface GigabitEthernet0/1
description<Interface to the MSE>
ip address xx.xx.xx.xx xx.xx.xx.xx
!
interface GigabitEthernet0/2
description<Interface towards the INTERNET>
ip address xx.xx.xx.xx xx.xx.xx.xx
!
!# default route towards the Internet
ip route 0.0.0.0 0.0.0.0 192.168.3.254
!
!# the access list matches traffic from the client subnet to TCP port 80
access-list 2000 permit tcp <client subnet> any eq www
!
route-map pbr permit 10
match ip address 2000
set ip next-hop <MSE ip address>
!

********************************************************************************

I need to know how the traffic exit from the MSE

i.e the router will redirect the HTTP traffic of client from interface gi 0/0 to inter gi 0/1. and then how the http traffic exit from the MSE.

please advice

thanks in advance.

Http proxy :http://www.cisco

Saurav Lodh — Mon, 27 Oct 2014 23:49:47 GMT

Http proxy :

http://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/CMX_Dashboard/Guide/Cisco_CMX_Dashboard_Config_Guide/appendix-A-http.html

topic Http proxy :http://www.cisco in Wireless

Cisco MSE CMX PBR

Http proxy :http://www.cisco