topic Re: Wireless Point to Multipoint in Wireless

Wireless Point to Multipoint

erodriguez@iqteksolutions.com — Tue, 02 Jul 2024 14:36:30 GMT

Hi,

I have a site presently using Ubiquiti GBE Plus as a point to point, but they are interested in adding an additional building. Which MR can one use for a Point to Multipoint solution? Looking at the MR86 or CW9163E

Thanks

Re: Wireless Point to Multipoint

aleabrahao — Tue, 02 Jul 2024 14:45:10 GMT

both MR86 and CW9163E could be used in a point-to-multipoint setup, but it would depend on the specific requirements of your network and the environment in which they will be deployed.

Can you give more information?

Re: Wireless Point to Multipoint

AMP2 — Tue, 02 Jul 2024 15:20:29 GMT

This documentation should help:
https://documentation.meraki.com/MR/Deployment_Guides/Mesh_Deployment_Guide#Point_to_multi-point_.2F_Multi-point_to_multi-point

Re: Wireless Point to Multipoint

erodriguez@iqteksolutions.com — Tue, 02 Jul 2024 15:43:12 GMT

Presently the Ubiquiti AP's are connected to the blue building, the idea is to connect both building as shown.

Re: Wireless Point to Multipoint

aleabrahao — Tue, 02 Jul 2024 16:00:35 GMT

You know you won't be able to use Mesh between Ubiquity and Meraki right?

I would personally go with the MR86.

Re: Wireless Point to Multipoint

erodriguez@iqteksolutions.com — Tue, 02 Jul 2024 16:02:12 GMT

I'm replacing Ubiquiti for Meraki