topic Re: LWAPP-1-AP_CONTAINED in Wireless

LWAPP-1-AP_CONTAINED

palithait1 — Mon, 05 Jul 2021 18:30:22 GMT

*spamApTask1: Jan 08 05:44:01.763: %LWAPP-1-AP_CONTAINED: spam_lrad.c:48958 AP AP-1-BOD is being contained on slot 0

*spamApTask1: Jan 08 05:42:00.377: %LWAPP-1-AP_CONTAINED: spam_lrad.c:48958 AP AP-1-BOD is being contained on slot 0

*spamApTask1: Jan 08 05:38:09.748: %LWAPP-1-AP_CONTAINED: spam_lrad.c:48958 AP AP-1-sample1is being contained on slot 0

*spamApTask1: Jan 08 05:31:44.398: %LWAPP-1-AP_CONTAINED: spam_lrad.c:48958 AP AP-1-sample1is being contained on slot 0

*spamApTask7: Jan 08 05:26:02.270: %LWAPP-1-AP_CONTAINED: spam_lrad.c:48958 AP AP-4-sample2is being contained on slot 0

*spamApTask7: Jan 08 05:19:37.278: %LWAPP-1-AP_CONTAINED: spam_lrad.c:48958 AP AP-4-sample2is being contained on slot 0

Any solution?

Re: LWAPP-1-AP_CONTAINED

Leo Laohoo — Wed, 08 Jan 2020 10:00:01 GMT

LWAPP?
What firmware is the controller running on?

Re: LWAPP-1-AP_CONTAINED

palithait1 — Wed, 08 Jan 2020 10:02:35 GMT

Software Version

8.5.160.0

Re: LWAPP-1-AP_CONTAINED

Scott Fella — Wed, 08 Jan 2020 15:15:42 GMT

Usually you see that in the logs when there is another Cisco wireless environment near yours and they have containment enabled. Are you in a shared tenant space?

Re: LWAPP-1-AP_CONTAINED

bbienaimee44 — Thu, 16 Jan 2020 15:29:45 GMT

Scott Fella,

I see the same logs in my message logs (Management > Logs > Message Logs) and to answer your question to the user that started this thread, my office building is a shared space. Should I go see the neighboring tenant? Also does seeing these logs cause issues with the APs in my environment servicing my clients?

-Bobby

Re: LWAPP-1-AP_CONTAINED

Scott Fella — Thu, 16 Jan 2020 16:46:58 GMT

If they also have. Cisco and containment is enabled, then yes it will cause issues. What this does and why its illegal at times is because the ap’s does a DOS and users will be affected. Now in the logs, it should show the ap name that is containing yours, so. You. can talk to them. Nicely and see if they can remove that.

Re: LWAPP-1-AP_CONTAINED

marcusCSCO — Wed, 27 Oct 2021 05:21:19 GMT

@palithait1

Did yo umanage to get this resolved in your environment?

@scot

I have the same problem as the above and it seems to be on and off from time to time but in my case it is my own controller that containing my own AP's. would this be related to a Bug?