topic Rogue Reporting- need an API (or suggestions) in Wireless

Rogue Reporting- need an API (or suggestions)

Jamiegprice15 — Mon, 28 Oct 2024 15:37:48 GMT

Hi, I see these API details for Air Marshall:
https://developer.cisco.com/meraki/api-v1/search/?q=rogues
APIs available listed below.

I need a way to report on the different networks across the org, so:
1- They have a list and can begin categorizing
2- We can run regular reports to share data and tack progress.

-Any way this can be accomplished now?

APIs Here:

Create Network Wireless Air Marshal RuleAPI

Update Network Wireless Air Marshal RuleAPI

Get Organization Wireless Air Marshal RulesAPI

Update Network Wireless Air Marshal SettingsAPI

Get Organization Wireless Air Marshal Settings By NetworkAPI

Much Thanks.

Re: Rogue Reporting- need an API (or suggestions)

GreenMan — Mon, 28 Oct 2024 16:25:00 GMT

I think this might be the endpoint you need: https://developer.cisco.com/meraki/api-v1/get-network-wireless-air-marshal/ this is a per-Network call.

Re: Rogue Reporting- need an API (or suggestions)

Jamiegprice15 — Mon, 28 Oct 2024 16:36:35 GMT

Thank you! Will dig on this.

Re: Rogue Reporting- need an API (or suggestions)

Jamiegprice15 — Tue, 29 Oct 2024 17:58:27 GMT

This API pulls great info. Thank you. Any suggestions on how to get only the Rogue SSIDs?

Re: Rogue Reporting- need an API (or suggestions)

GreenMan — Tue, 29 Oct 2024 18:16:28 GMT

I'd expect some content, for a rogue in one or more of these :

"wiredMacs": [ "00:11:22:33:44:55" ],

"wiredVlans": [ 0, 108 ],

"wiredLastSeen": 1526087474

Re: Rogue Reporting- need an API (or suggestions)

Jamiegprice15 — Thu, 31 Oct 2024 18:31:55 GMT

Perfect- thank you!

Re: Rogue Reporting- need an API (or suggestions)

Jamiegprice15 — Fri, 01 Nov 2024 23:42:41 GMT

Thank you. I made this:
Merakicode/RogueAirMarshallAllIn1CSV at main · jadexing/Merakicode

Pretty happy with this.

Re: Rogue Reporting- need an API (or suggestions)

CarolineS-Meraki — Thu, 05 Dec 2024 23:03:12 GMT

Thank you so much for sharing, @Jamiegprice15! I have just adjusted the marked "solution" to be this post with the code linked (instead of the earlier "Thank you! Will dig on this." reply :-)).