topic Re: 9100 Series in Wireless

9100 Series

Mayhhem — Thu, 04 Jul 2024 15:27:22 GMT

Hello,

Does Meraki Dashboard migration support the 9100 Series (9120AXI-E and 9115AXI-E)?

Re: 9100 Series

Raphael_L — Thu, 04 Jul 2024 15:35:27 GMT

Hi ,

Yes according to this document : https://documentation.meraki.com/Cloud_Monitoring_for_Catalyst/Getting_Started/Cloud_Monitoring_for_Catalyst_Wireless_FAQ

Wi-Fi 6:

Cisco Catalyst 9130 Series
Cisco Catalyst 9124 Series
Cisco Catalyst 9120 Series
Cisco Catalyst 9117 Series
Cisco Catalyst 9115 Series
Cisco Catalyst 9105 Series

Only in monitoring mode.

Re: 9100 Series

Mayhhem — Thu, 04 Jul 2024 15:42:47 GMT

Thank you for your quick reply 🙂

Re: 9100 Series

Rasmus Hoffmann Birkelund — Thu, 04 Jul 2024 16:16:26 GMT

Do note that the Dashboard only supports these APs in cloud monitoring as @Raphletourn mentions. So you’ll still need a 9800 controller. You can not add these APs as any other Meraki AP and manage it from the Dashboard.

Re: 9100 Series

Thomas Obbekaer Thomsen — Tue, 23 Jul 2024 20:07:44 GMT

You write "migration" ... do you mean converting these APs to be running on the dashboard without a local WLC ?

Then no, that is only for the CW916x APs (where you can actually start the migration on the 9800 WLC).

For monitoring the 9800 WLC with the C9100 APs on the dashboard yes, that is supported as mentioned by others.